MediaPortal SVN-Snapshot:-08-08-2009 14-40h - Revision:23361.rar (2 Viewers)

-Manfred-

Retired Team Member
  • Premium Supporter
  • May 15, 2007
    728
    343
    Home Country
    Finland Finland
    With this svn I can not fast forward mp3's playing in my music. Usually pressing the fast forward button, would skip ahead a certain amount of seconds, now it does nothing.

    I tried with MCE & X10 remotes.

    Logs are attached

    Thanks

    Neil

    Yes, when implementing video seek & chapter change with topbar buttons this happened. Heh, bass player was not implemented against interface and also it was a bit clumsy to use. From now on you can have audible seeks with different speeds, just like in videos, until play button pushed.
     

    christix

    MP Donator
  • Premium Supporter
  • February 27, 2008
    94
    12
    65
    Skepplanda
    Home Country
    Sweden Sweden
    With this svn I can not fast forward mp3's playing in my music. Usually pressing the fast forward button, would skip ahead a certain amount of seconds, now it does nothing.

    I tried with MCE & X10 remotes.

    Logs are attached

    Thanks

    Neil

    Yes, when implementing video seek & chapter change with topbar buttons this happened. Heh, bass player was not implemented against interface and also it was a bit clumsy to use. From now on you can have audible seeks with different speeds, just like in videos, until play button pushed.

    I don't understand:eek: What should i do to make music searchable. Could you explain so even a stupid man understand:D
     

    chemelli

    Retired Team Member
  • Premium Supporter
  • September 28, 2006
    6,159
    2,264
    49
    Milano, Italy
    Home Country
    Italy Italy
    Hi Devs!

    Sometimes TVService crashes! It is not possible to restart TVService with "services.msc"! Only a reboot solves it!

    I attach logs and a screenshot!

    Best regards

    Helios

    Please try unchecking EPG idle grabber...

    Simone
     

    rich110

    Portal Pro
    July 16, 2005
    127
    6
    Melbourne
    Home Country
    Australia Australia
    As stated in a post in the previous SVN, diseqc does not seem to be working correctly.

    Problem:
    LNB1 = 156 degree Optus C1 (scrambled channels)
    LNB2 = 160 degree Optus D1 (non-scrambled channels)

    Card connected to the diseqc switch - TT-S3200 (DVB-S).
    Second card not connected to diseqc swithc - Hauppage NOVA-S (DVB-S)

    Scanning the TT-S3200 during setup finds all the channels across both LNB's (i.e. diseqc seems to be working fine during scan). But, when watching TV in MP, if my Hauppage NOVA-S is being used to record a program, I can switch to a scambled channel with my TT-S3200 card (on LNB1) but get a "No Signal" error when trying to switch to a non-scrambled channel with the TT-S3200 (LNB2). It seems like the diseqc command isn't switching between the two LNBs.

    I've checked the logs (attached) and the diseqc command does appear to be being sent.

    Thanks.

    Any idea about this? Should I maybe post this information in the main MP 1.1.0Alpha thread?

    Thanks
     

    Helios61

    Retired Team Member
  • Premium Supporter
  • January 30, 2008
    4,587
    873
    62
    NRW
    Home Country
    Germany Germany
    Hi Simone!

    Hi Devs!

    Sometimes TVService crashes! It is not possible to restart TVService with "services.msc"! Only a reboot solves it!

    I attach logs and a screenshot!

    Best regards

    Helios

    Please try unchecking EPG idle grabber...

    Simone

    Do you really think, that this is this very, very old issue, posted twenty times and more? :confused: I have thought in the same direction!

    Best regards

    Helios
     

    Guzzi

    Retired Team Member
  • Premium Supporter
  • August 20, 2007
    2,161
    747
    Hi Devs!

    Sometimes TVService crashes! It is not possible to restart TVService with "services.msc"! Only a reboot solves it!

    I attach logs and a screenshot!

    Best regards

    Helios

    Please try unchecking EPG idle grabber...

    Simone

    ANy chance to post entries in the logs to make it easier to find out, where exactely the idle grabber (what transponders/channels) is causing the problems? I have reduced month ago the channels to a minimum and never had crashes since that time, but I am always afraid adding channels to it because of those crashes and the pain to find the causes for it...
     

    Helios61

    Retired Team Member
  • Premium Supporter
  • January 30, 2008
    4,587
    873
    62
    NRW
    Home Country
    Germany Germany
    Hi Guzzi!

    Hi Devs!

    Sometimes TVService crashes! It is not possible to restart TVService with "services.msc"! Only a reboot solves it!

    I attach logs and a screenshot!

    Best regards

    Helios

    Please try unchecking EPG idle grabber...

    Simone

    ANy chance to post entries in the logs to make it easier to find out, where exactely the idle grabber (what transponders/channels) is causing the problems? I have reduced month ago the channels to a minimum and never had crashes since that time, but I am always afraid adding channels to it because of those crashes and the pain to find the causes for it...


    My logs are attached to my posting -> Link

    After disableling the idle grabber, now all seems to work fine!

    Best regards

    Helios
     

    Users who are viewing this thread

    Top Bottom