Germany
TV-Server Version: latest svn (on server)
MediaPortal Version: 0.2.3.0 + latest svn
MediaPortal Skin: standard
Windows Version: Vista Ultimate (on client and server)
CPU Type: Core2Duo E6600 (server: Core2Duo E4300)
HDD: 2x WD 80 GB in Raid0 (server: 2x Samsung 200GB)
Memory: 2G DDR2 (server: 2G DDR2)
Motherboard: Asus P5KR (server: P5GC-VM)
Motherboard Chipset: Intel P35/ICH9R (server: Intel 945GC/ICH7)
Motherboard Bios:
Video Card: Asus EN8600GT Silent 256MB (server: onboard)
Video Card Driver:
Sound Card:
Sound Card AC3:
Sound Card Driver:
1. TV Card: TechnoTrend S2-3200 in server
1. TV Card Type: DVB-S / DVB-S2
1. TV Card Driver:
2. TV Card: Same as above, but not in use
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
Satelite/CableTV Provider: Astra 19.2 E
HTPC Case: (built into wall)
Cooling:
Power Supply:
Remote:
TV: Dell 3007 WFP-HC
TV - HTPC Connection: Dual-Link DVI
Well, the client logs are actually not from the above HTPC, but from my laptop (Dell D620, WinXP Pro).
However, the same happens on the HTPC (Vista Ultimate) also.
Locally on the server, however, MP TV does work.
And my network configuration worked and works fine with release 17180 (before and after this test).
So what did I do:
Installed client and server svn 17278.
Started server.
Then started remote client.
Chose channel. Since then MP hang. Had to kill it via task mgr.
Log files are included.
I could still start MP on the server and run TV (on that same transponder only, since stream was still ongoing).
SetupTV shows the stream on "Manual Control" page, but not on "Streaming Server" page.
Hope that helps.
MediaPortal Version: 0.2.3.0 + latest svn
MediaPortal Skin: standard
Windows Version: Vista Ultimate (on client and server)
CPU Type: Core2Duo E6600 (server: Core2Duo E4300)
HDD: 2x WD 80 GB in Raid0 (server: 2x Samsung 200GB)
Memory: 2G DDR2 (server: 2G DDR2)
Motherboard: Asus P5KR (server: P5GC-VM)
Motherboard Chipset: Intel P35/ICH9R (server: Intel 945GC/ICH7)
Motherboard Bios:
Video Card: Asus EN8600GT Silent 256MB (server: onboard)
Video Card Driver:
Sound Card:
Sound Card AC3:
Sound Card Driver:
1. TV Card: TechnoTrend S2-3200 in server
1. TV Card Type: DVB-S / DVB-S2
1. TV Card Driver:
2. TV Card: Same as above, but not in use
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
Satelite/CableTV Provider: Astra 19.2 E
HTPC Case: (built into wall)
Cooling:
Power Supply:
Remote:
TV: Dell 3007 WFP-HC
TV - HTPC Connection: Dual-Link DVI
Well, the client logs are actually not from the above HTPC, but from my laptop (Dell D620, WinXP Pro).
However, the same happens on the HTPC (Vista Ultimate) also.
Locally on the server, however, MP TV does work.
And my network configuration worked and works fine with release 17180 (before and after this test).
So what did I do:
Installed client and server svn 17278.
Started server.
Then started remote client.
Chose channel. Since then MP hang. Had to kill it via task mgr.
Log files are included.
I could still start MP on the server and run TV (on that same transponder only, since stream was still ongoing).
SetupTV shows the stream on "Manual Control" page, but not on "Streaming Server" page.
Hope that helps.