MP RC4 always crashes on scanning for TV Channels (1 Viewer)

[Fishermans]

Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4$CVS-23.04.2006- 1:01:19,13
(2006-04-23)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP (SP2)
.NET CLR Version: 2.0.50727
DirectX Version: 4.09.00.0904 (9.0c)
Audio Codec: MPEG/AC3/DTS/LPCM Audio Decoder
Video Codec: Mpeg2Dec Filter
CPU Type: AMD Athlon 64 3200+
Memory: 1 GB
Motherboard: A8V Deluxe (ASUSTeK Computer Inc.)
TV Card Model: PVR 150MCE - PVR PCI II (26xxx)
TV Card Type: Software
TV Card Driver: 2.0.35.23348
Video Card Model: Radeon 9600 Series (256 MB)
Video Card Driver: 8.241.0.0
Video Card Resolution: 1600x1200
Video Render Type: VMR9
Audio Card Model: Realtek AC'97 Audio for VIA (R) Audio Controller
Audio Card Driver: 5.10.0.5530
Synopsis::

MP RC4 always crashes on scanning for TV Channels. (Dr. Watson)
====
Log-File:
====
23.04.2006 16:34:56 SinkGraphEx:CreateGraph() OUT
23.04.2006 16:34:56 GetFilterByName: Kernel Tee, Kernel Tee
23.04.2006 16:34:56 GetFilterByName: WST Codec, WST Codec
23.04.2006 16:34:56 SinkGraph:Getting Min and Max TV channels
23.04.2006 16:34:56 SinkGraph: TV Channel Min 1 hz - Radio Channel Max 69
23.04.2006 16:34:56 SinkGraphtartViewing()
23.04.2006 16:34:56 7 vmr9:addvmr9
23.04.2006 16:34:56 7 vmr9:addvmr9: dont use vmr9
23.04.2006 16:34:56 7 vmr9ispose
23.04.2006 16:34:56 add filter:Mpeg2Dec Filter to graph
23.04.2006 16:34:57 added filter:Mpeg2Dec Filter to graph
23.04.2006 16:34:57 add filter:MPEG/AC3/DTS/LPCM Audio Decoder to graph
23.04.2006 16:34:57 added filter:MPEG/AC3/DTS/LPCM Audio Decoder to graph
23.04.2006 16:34:57 SinkGraph:TuneChannel() tune to channel:1 country:31 standard:None name:
23.04.2006 16:34:57 Twinhan: check for twinhan driver
23.04.2006 16:34:57 SinkGraph:TuneChannel() tuningspace:0 country:31 tv standard:None cable:False
23.04.2006 16:34:57 SinkGraph:TuneChannel() tuned to channel:1 county:31 freq:48,25 MHz. tvformatAL_B signalignalPresent
23.04.2006 16:34:57 FixCrossbarRouting: use tuner:True use cvbs#1:False use cvbs#2:False use svhs:False use rgb:False
23.04.2006 16:34:57 Find crossbar:#1
23.04.2006 16:34:57 crossbar found:1
23.04.2006 16:34:57 crossbar has 5 inputs and 2 outputs
23.04.2006 16:34:57 check:in#0->out#0 / Video_Tuner -> Video_VideoDecoder
23.04.2006 16:34:57 connect
23.04.2006 16:34:57 connect success
23.04.2006 16:34:57 check:in#2->out#0 / Video_SVideo -> Video_VideoDecoder
23.04.2006 16:34:57 check:in#3->out#0 / Video_Composite -> Video_VideoDecoder
23.04.2006 16:34:57 check:in#1->out#1 / Audio_Tuner -> Audio_AudioDecoder
23.04.2006 16:34:57 connect
23.04.2006 16:34:57 connect success
23.04.2006 16:34:57 check:in#4->out#1 / Audio_Line -> Audio_AudioDecoder
23.04.2006 16:34:57 Find crossbar:#2
23.04.2006 16:34:57 no more crossbars.:0x80004005
23.04.2006 16:34:57 crossbar routing done
23.04.2006 16:34:57 mpeg2tartViewing()
23.04.2006 16:34:57 mpeg2:demux video out connected

 

[wizard84]

i have the same problem....i can scan the channels from configuration.exe without any problems (my tv card: hvr-1300/nova-t)

 

[kenman]

Hi, I had the same problem with my HVR 1300. Finally, I found a solution.
-Start MP setup
-Change video codec for TV (DScaler works perfectly for me)
-Save and close setup
-Restart MP setup
-Enter in Autotune section and lauch autotune
- ... I hope it will work for you

I think that some video codecs crashes TV and consequently AUTOTUNE.

 

[Glith]

I wouldnt call it a solution... I would call it a temporary workaround until the bug is fixed. =)

 

[Fishermans]

Hi, I had the same problem with my HVR 1300. Finally, I found a solution.
-Start MP setup
-Change video codec for TV (DScaler works perfectly for me)
-Save and close setup
-Restart MP setup
-Enter in Autotune section and lauch autotune
- ... I hope it will work for you

I think that some video codecs crashes TV and consequently AUTOTUNE.

Thanks for the hint but it's still the same. After I have selected the country and pressed on "scan" it crashes completely. RC3 work perfectly without any SVN snapshots.

 

[framug]

Hello,
Same problem with a PVR-350

 

[Fishermans]

Same on x64 Windows XP

 

[Paranoid Delusion]

Hi All

Do you manage to get MP to run, ie homescreen.
If so try using settings\setup wizard, skip all the bits you may have already done and go to the tv part and try tuning again.
The only reason i am saying this there have been a difference in the past between the two which caused my channels to be found using one but not the other, worth a try.

8)

 

[Fishermans]

It's still impossible to run the configuartion wizard. That's why I cannot use RC4 or any of its svn versions.

The setup is always crashing on scanning for tv channels or if you skip this step during setup, the configuration.exe cannot be run anymore (Dr. Watson)

Admins! Please add this to mantis!!!! THANKS

 

[davej00]

I only saw this on RC4+SVN after 6-May. If I use 12-May SVN -- crashes during scan. [configure.exe] If I use 6-May SVN -- no problems.

Bizarre !

- Dave