- January 29, 2007
- 704
- 125
- Home Country
- Germany
- Thread starter
- #11
No because it does not help. Same problems with 'no signal'. I tested this during the last weeks with my two HTPC and the server.
Cheers
Blue Max
Cheers
Blue Max
IMHO 1115 is pretty good.Instead of 976 TV channels there are 1115 now but not 1520.
Which channels were these?Six channels I had entered manually yesterday as they did not show up.
"No signal" does not automatically mean error or problem.I had several occurences of 'No signal'. Most of them at 18.something MHz.
IMHO 1115 is pretty good.Instead of 976 TV channels there are 1115 now but not 1520.
KingOfSat gives the following channel counts:
http://en.kingofsat.net/pos-19.2E.php
As you can see, 1115 is only missing 13 channels.
- total = 1428
- free-to-air (not encrypted) = 719
- TV = 1128
- radio = 175
- data = 125
My guess is that your 1520 number includes obsolete/duplicate entries which should not be counted.
Which channels were these?Six channels I had entered manually yesterday as they did not show up.
I cannot investigate missing channels if you don't tell me which one are missing.
"No signal" does not automatically mean error or problem.I had several occurences of 'No signal'. Most of them at 18.something MHz.
18*** MHz transponders are Ka band. You can't receive them with your Ku band LNB, so it is expected that you would get no signal. Note that Ka channels are not included in the KingOfSat numbers quoted above.
According the log file, the other transponders that were "no signal" were:
[2016-03-01 18:51:05,319] [Log ] [19 ] [INFO ] - dvbs: ScanVBS:tv: Freq:12090000 ONID:-1 TSID:-1 SID:-1 PMT:0xFFFFFFFF FTA:False LCN:10000 SymbolRate:29700 Modulation:ModQpsk Polarisation:LinearV InnerFecRate:Rate5_6 DisEqc:None band:Universal Pilot:Off RollOff:ThirtyFive
[2016-03-01 18:52:52,542] [Log ] [19 ] [INFO ] - dvbs: ScanVBS:tv: Freq:12522000 ONID:-1 TSID:-1 SID:-1 PMT:0xFFFFFFFF FTA:False LCN:10000 SymbolRate:22000 Modulation:Mod8Psk Polarisation:LinearV InnerFecRate:Rate2_3 DisEqc:None band:Universal Pilot:On RollOff:ThirtyFive
[2016-03-01 18:52:54,814] [Log ] [19 ] [INFO ] - dvbs: ScanVBS:tv: Freq:12552000 ONID:-1 TSID:-1 SID:-1 PMT:0xFFFFFFFF FTA:False LCN:10000 SymbolRate:22000 Modulation:ModNotSet Polarisation:LinearV InnerFecRate:Rate5_6 DisEqc:None band:Universal Pilot:NotSet RollOff:NotSet
[2016-03-01 18:54:24,942] [Log ] [19 ] [INFO ] - dvbs: ScanVBS:tv: Freq:12728000 ONID:-1 TSID:-1 SID:-1 PMT:0xFFFFFFFF FTA:False LCN:10000 SymbolRate:22000 Modulation:Mod8Psk Polarisation:LinearV InnerFecRate:Rate2_3 DisEqc:None band:Universal Pilot:On RollOff:ThirtyFive
[2016-03-01 19:00:34,901] [Log ] [23 ] [INFO ] - dvbs: ScanVBS:tv: Freq:12545000 ONID:-1 TSID:-1 SID:-1 PMT:0xFFFFFFFF FTA:False LCN:10000 SymbolRate:22000 Modulation:ModNotSet Polarisation:LinearH InnerFecRate:Rate5_6 DisEqc:None band:Universal Pilot:NotSet RollOff:NotSet
All of these 5 are valid transponder details.
I cannot see any obvious pattern (eg. all DVB-S2), so I can't explain why they weren't locked. However in one other case I saw that locking on signal required almost 2 seconds:
[2016-03-01 19:00:37,151] [Log ] [23 ] [INFO ] - dvbs: ScanVBS:tv: Freq:12574000 ONID:-1 TSID:-1 SID:-1 PMT:0xFFFFFFFF FTA:False LCN:10000 SymbolRate:22000 Modulation:Mod8Psk Polarisation:LinearH InnerFecRate:Rate2_3 DisEqc:None band:Universal Pilot:On RollOff:ThirtyFive
...
[2016-03-01 19:00:37,339] [Log ] [23 ] [INFO ] - dvb: RunGraph
...
[2016-03-01 19:00:39,246] [Log ] [23 ] [INFO ] - dvb: LockInOnSignal ok
That is very close to the 2 second tune timeout setting:
http://wiki.team-mediaportal.com/1_...n/TV-Server_Configuration/06_General#Scan_Tab
So, perhaps it would help if you increase that setting a little.
...but in general I think that results of 1115 out of 1128 channels and 106 out of 111 transponders is pretty good...
I'm glad.O.k., I did not touch the channels on HTPC 1 because it is just working
If I am near the optimum as you stated then I am satisfied.
All of those channels were found in the scan. So, this is an example of why it is so important to use the "update satellite list" function. No need to add channels manually when the scanning transponder list is correct.The channels are...
No problem. I'm happy to have been able to assist.Thank you very much for the feedback.