My TV: multi analog tuner recording tunes wrong (1 Viewer)

[scoop]

Hi FlipGer,

I will try your test procedure tomorrow and see if I can duplicate the behaviour. I agree with you that cable:false shouldn't be occurring.

Kind regards,
Michel

 

[infinite.loop]

any progress here?

 

[scoop]

Hi,

Finally some free time off (and a free HTPC as well ) to test this scenario. This is what I did:

- Configured both my tuners to Country=Germany and Input=Cable (card1=prio10, card2=prio1)
- Changed one of my channels to channel=22, freq=0, country=default (Germany) and standard=default (PAL_B).
- Entered the TVGuide and scheduled two overlapping recordings on that channel

Please note that I did not start live TV on this channel before the recordings kicked in! So graph building and timeshifting/recording were all initiated by the recorder, not by starting to view a channel.

This is what happened:

14-4-2006 19:27:36 SinkGraph:TuneChannel() tune to channel:22 country:49 standard:None nameBS 6
14-4-2006 19:27:36 Twinhan: check for twinhan driver
14-4-2006 19:27:36 SinkGraph:TuneChannel() tuningspace:0 country:49 tv standard:None cable:False
14-4-2006 19:27:36 SinkGraph:TuneChannel() tuned to channel:22 county:49 freq:480,0625 MHz. tvformatAL_B signalignalPresent

14-4-2006 20:25:34 SinkGraph:TuneChannel() tune to channel:22 country:49 standard:None nameBS 6
14-4-2006 20:25:34 Twinhan: check for twinhan driver
14-4-2006 20:25:34 SinkGraph:TuneChannel() tuningspace:0 country:49 tv standard:None cable:True
14-4-2006 20:25:35 SinkGraph:TuneChannel() tuned to channel:22 county:49 freq:480,0625 MHz. tvformatAL_B signalignalPresent

So, for me the first recording has Cable:False, and the second has Cable:True. Another thing I notice is that both recordings use the same frequency, only for me this somehow is 480,0625MHz.

Next thing I tried is just starting to view this channel, which results in the following:

14-4-2006 20:32:41 SinkGraph:TuneChannel() tune to channel:22 country:49 standard:None nameBS 6
14-4-2006 20:32:41 Twinhan: check for twinhan driver
14-4-2006 20:32:41 SinkGraph:TuneChannel() tuningspace:0 country:49 tv standard:None cable:False
14-4-2006 20:32:41 SinkGraph:TuneChannel() tuned to channel:22 county:49 freq:480,0625 MHz. tvformatAL_B signalignalPresent

So, somehow it seems that channel (or card1) is now "stuck" on Cable:False, but either way the frequency is the same.

I tried all this again but then with a newly created channel. This time Cable was set to true for the first recording (card1) and false for the second one (card2), but again both recordings were tuned to the same frequency.

To make a long story short: I can't relate the Cable:False to the change in frequency. If someone sees any logic in everything else I'm seeing here please enlighten me!

Kind regards,
Michel

 

[FlipGer]

Hi,

back from easter vacation.

Issue still present with mediaportal-svn-04-18-2006--10-31.rar
Second card cable:false => wrong frequency.

@Michel: Thanks for testing. Interresting result. Both tune the same frequency, but both the wrong!
Cable channel 22 should be 189,3125 MHz
Antenna channel 22 should be 479,25 MHz

Sure you deleted your old frequency settings. Maybe a look into the DB with SQLLight Browser helps?

Flip.

 

[FlipGer]

Hi,

someone found the problem for this bug!
https://forum.team-mediaportal.com/viewtopic.php?p=88659

Flip.

 

[infinite.loop]

Hi,

someone found the problem for this bug!
https://forum.team-mediaportal.com/viewtopic.php?p=88659

Flip.

Great News!

 

[FlipGer]

Hi,

Patch on Sourceforge:
http://sourceforge.net/tracker/index.php?func=detail&aid=1478978&group_id=107397&atid=647927



Flip.

 

[eric.c.mi]

has this been implemented into the svn yet ?

i just got this:

#
4/29/2006 7:00:53 PM SinkGraph:TuneChannel() tuningspace:0 country:1 tv standard:None cable:False
#
4/29/2006 7:00:53 PM SinkGraph:TuneChannel() tuned to channel:47 county:1 freq:669.25 MHz. tvformat:NTSC_M signal:NoSignal
#
4/29/2006 7:00:53 PM FixCrossbarRouting: use tuner:True use cvbs#1:False use cvbs#2:False use svhs:False use rgb:False

It happened after Mp crashed whhile recording. I started it back up again and the recording icon was visable. I pressed the TV button on myremote and got nothing but static. posted the full log to http://mp.pastebin.com/689450

 

[infinite.loop]

has this been implemented into the svn yet ?

just watch the changelog. as soon as it is in SVN you will find an entry

 

[scoop]

Hi,

Please try latest public SVN snapshot! https://forum.team-mediaportal.com/viewtopic.php?p=88819#88819

Kind regards,
Michel