New Zealand
TV-Server Version: TVE3 - MP1.0rc1 - svn19069
MediaPortal Version: MP1.0rc1 - svn19069
MediaPortal Skin: Xface
Windows Version: XP sp3
CPU Type: AMD Athlon64 4000+
HDD: Seagate
Memory: 2gb
Motherboard: Asus A8N-E
Video Card: ASUS 8600gt Silent
Video Card Driver: 174.74
Sound Card:
Sound Card AC3: Coaxial
Sound Card Driver:
1. TV Card: Leadtek Winfast PVR2000
1. TV Card Type: Analog
1. TV Card Driver:
2. TV Card: Hauppauge HVR 1100
2. TV Card Type: DVB-T
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: Purevideo
MPEG2 Audio Codec:
h.264 Video Codec: Cyberlink
Satelite/CableTV Provider:
HTPC Case: Zalman HD160
Cooling:
Power Supply: Thermaltake Purepower 560w
Remote: Harmony 520 (irTrans MCE Compatible)
TV:
TV - HTPC Connection: Component
Hi,
for some time now I've been using a single analog tuner card (Leadtek Winfast PVR2000) within TVE3 without any (major) problems. Yesterday I added a Freeview DVB-T card to my system - a Hauppauge HVR1100, actually a hybrid card but I've disabled the analog tuner. The DVB-T card works fine, found all channels on scanning, looks great. Here in New Zealand, there is one main channel that is not available on Freeview DVB-T - 'Prime'. I've set the DVB-T card as highest priority, with the analog PVR2000 as lower priority. I figured, all other channels (when selected) would play from the DVB-T card, and when I changed to 'Prime' the analog card would kick-in. However, all the DVB-T channels play fine, but when I switch to 'Prime' I get an 'Unable to start timeshifting...' error, and when I try to preview in configuration, I get an 'Unable to Preview, unknown error' message. It was working fine prior to the addition of the DVB-T card, and it works fine in the WinfastPVR2 tuning/viewing software - it's just doesn't want to work for MediaPortal. I've tried it with the specific frequency (783.25) in the channel configuration, and without (just the channel no. 60) - nothing works.
Logs attached - any ideas??
Cheers,
Trav.
*** Also, scanning for channels withing TV Server Config, nothing is found/returned for the analog card - don't know if this is related ***
MediaPortal Version: MP1.0rc1 - svn19069
MediaPortal Skin: Xface
Windows Version: XP sp3
CPU Type: AMD Athlon64 4000+
HDD: Seagate
Memory: 2gb
Motherboard: Asus A8N-E
Video Card: ASUS 8600gt Silent
Video Card Driver: 174.74
Sound Card:
Sound Card AC3: Coaxial
Sound Card Driver:
1. TV Card: Leadtek Winfast PVR2000
1. TV Card Type: Analog
1. TV Card Driver:
2. TV Card: Hauppauge HVR 1100
2. TV Card Type: DVB-T
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: Purevideo
MPEG2 Audio Codec:
h.264 Video Codec: Cyberlink
Satelite/CableTV Provider:
HTPC Case: Zalman HD160
Cooling:
Power Supply: Thermaltake Purepower 560w
Remote: Harmony 520 (irTrans MCE Compatible)
TV:
TV - HTPC Connection: Component
Hi,
for some time now I've been using a single analog tuner card (Leadtek Winfast PVR2000) within TVE3 without any (major) problems. Yesterday I added a Freeview DVB-T card to my system - a Hauppauge HVR1100, actually a hybrid card but I've disabled the analog tuner. The DVB-T card works fine, found all channels on scanning, looks great. Here in New Zealand, there is one main channel that is not available on Freeview DVB-T - 'Prime'. I've set the DVB-T card as highest priority, with the analog PVR2000 as lower priority. I figured, all other channels (when selected) would play from the DVB-T card, and when I changed to 'Prime' the analog card would kick-in. However, all the DVB-T channels play fine, but when I switch to 'Prime' I get an 'Unable to start timeshifting...' error, and when I try to preview in configuration, I get an 'Unable to Preview, unknown error' message. It was working fine prior to the addition of the DVB-T card, and it works fine in the WinfastPVR2 tuning/viewing software - it's just doesn't want to work for MediaPortal. I've tried it with the specific frequency (783.25) in the channel configuration, and without (just the channel no. 60) - nothing works.
Logs attached - any ideas??
Cheers,
Trav.
*** Also, scanning for channels withing TV Server Config, nothing is found/returned for the analog card - don't know if this is related ***
