No analog signal Kworld 713x hybrid card (1 Viewer)

[xdr3am]

TV-Server Version: 1.0 RC3
MediaPortal Version: 1.0 RC3
MediaPortal Skin: Standart
Windows Version: WinXP Pro SP3
CPU Type: Intel Pentium4 2,4GHz
HDD: 250 GB WD PATA
Memory: 1GB
Motherboard: Asrock M266a
Video Card: ATI x800 xtpe
Video Card Driver: Newest
Sound Card: onboard
Sound Card AC3: onboard
Sound Card Driver: newest
1. TV Card: KWorld DVB-T 210SE
1. TV Card Type: PCI Analog/DVB-T Hybrid tuner.
1. TV Card Driver: V.1.3.4.3 (newest from http://global.kworld-global.com/main/prod_in.aspx?mnuid=1248&modid=6&pcid=56&ifid=16&prodid=68
MPEG2 Video Codec: MPV decoder Filter
MPEG2 Audio Codec: MPA decoder Filter
h.264 Video Codec: None (will not use it anyway)...
Power Supply: 400 W psu
TV: Philips 32pf9632
TV - HTPC Connection: HDMI

My problem is that it will not scan analog channels?? DVB-T takes like a couple of seconds, but on the analog side it finds nothing at all Can someone help me with that problem?? The chipset it is using is Philips 713x, dunno if it helps you??

Okay now i got it alive!! It found all my channels, after i installed CyberLink PowerCinema!!
Only problem now is that I only get 1 frame from each channel?? DVB-T still runs fine, but i only catch 1 frame from each analog channel, I have set the tuner up as a hybrid card?? Any clues??

 

[5Hundred]

Try installing windvr 3, and delete the cyberilink encoders

 

[xdr3am]

Okay thank you, i'll try that

 

[xdr3am]

Now I did try that, but the quality really sucks. It's like the resolution of the input is too small... Digital is still running very smooth and nice quality..

 

[5Hundred]

You can change the quality of the encoder via the TV server configuration on each card, that might help

 

[xdr3am]

You can change the quality of the encoder via the TV server configuration on each card, that might help

Can you be a little more specific on that?? I can't find any quality settings in TV server configuration??

 

[5Hundred]

open your analog card within tvsever, and there should be a "quality" tab, click on check, and then you should be able to configure bitrate etc.

This patch

https://forum.team-mediaportal.com/development-91/patch-improvements-analog-cards-33290/

lets you change the encoder, very useful. However it is very specific about which version of mp it will work with, just waiting on the latest version to come out