[confirm] No LiveTV after enabling CI (DD Cine2 CI) (1 Viewer)

[rbo]

Hi,

I'm testing the 1.2.0 A after reading the new support of Digital Devices.

It seems that it doesn't work at all. If I activate the CI-Module in DVBCineConfig (DD-Tool, see dd.jpg) there's no LiveTV working.

If I deactivate the CI everything's works well.

It is a clean MP 1.2.0 A installation with no skins and I have only one plugin installed (Audio Renderer Changer).

I'm testing with DD Cine2 CI because I've never get a stable installation with my CI-Module and Alphacrypt Classic. I'm testing with TT CT 3650 and FloppyDTV.

Ciao
rbo.

 

[lhcomputer]

AW: No LiveTV after enabling CI (DD Cine2 CI)

Test the old Driver Version x57. The Driver Version x60 have this Problem with any Mainbaords or newer Gigabyte 785G (>F6) / 880G (>F2)Firmware.
Old Driver x57 find you in this Forum Thread.

https://forum.team-mediaportal.com/general-development-no-feature-request-here-48/digitaldevices-dual-dvb-s2-testing-cam-diseqc-82416/



A.Herberg Center PC

 

[Tom92]

Thanks for this advice, but ontheotherhand the x60 driver worked flawlessly with MP version 1.1.1 even with CI. Switching to MP 1.2.0 alpha crashed the live-TV and Morpheus_XX patch for the Cine S2 requires the 2.0.xx driver version but also shows unpredictable behaviour with installed CI. When not using CI everything works again with MP 1.2.0 alpha and driver version 2.0.20.

Having a Gigabyte 890FX Board.

 

[glenn 1990]

Mp 1.2 alpha doesn't support driver version 2.0.20 (I think the next beta will), Use driver version .60 or lower.
I use the .34 driver (have some problems with .60) without problems.

 

[lhcomputer]

AW: No LiveTV after enabling CI (DD Cine2 CI)

glenn 1990
You say you have Somerset Problem with x60. What is your Problem with x.60 Version

I have the Problen (testet with fresh mP 1.1.1 Install) . Switch between SkY HD and SKY SD Switch Time is 10s (Not everything Switch, only with SKY)
Crypt Modul is Alpha Crypt Light 1.20

A.Herberg

 

[rbo]

AW: No LiveTV after enabling CI (DD Cine2 CI)

Hi lhcomputer,

I don't find the DD Driver Version x57, only the x55 is there available.

With the x55 driver I see the CAM in TV-server but no LiveTV is running.

With the x34 driver there's no CI in DD-Tool available, LiveTV is working.

What else can I do?

Ciao
rbo.

 

[glenn 1990]

hi ihcomputer,

The problem I have with the .60 driver is that my card sometimes crash after several channel changes and standby cycles.
With the .34 driver (old firmware), I haven't got this problem.

See my post here for more information.
https://forum.team-mediaportal.com/mediaportal-1-2-0-alpha-536/stress-test-your-tvserver-88947/index2.html

 

[lhcomputer]

AW: No LiveTV after enabling CI (DD Cine2 CI)

rbo

Hi lhcomputer,

I don't find the DD Driver Version x57, only the x55 is there available.

With the x55 driver I see the CAM in TV-server but no LiveTV is running.

With the x34 driver there's no CI in DD-Tool available, LiveTV is working.

What else can I do?

You have right. I have look it the x55 driver. Sorry
I have Upload the .x57 driver



glenn 1990

hi ihcomputer,

The problem I have with the .60 driver is that my card sometimes crash after several channel changes and standby cycles.
With the .34 driver (old firmware), I haven't got this problem.

See my post here for more information.
stress test your tvserver.

Thanks for the feedback.

Today I had some time and the one with the long switching delay between Sky SD and Sky HD channels tested. (X.60 Firmware Driver old F5 on the Gigabyte board) and found a solution how to solve the problem only one time.

If, in the TV Server configuration Disabled de 2. digital tuner an in Digital Device Software CI configuration Disabeld for CI for the 2. Tuner also is noch Time Delay betwenn Sky HD and Sky SD. The same will probably work even if one maps the Sky channels only to one tuner.

Can you upload der Driver Version x.34 (64 Bit) for me ?

 

[glenn 1990]

You can find the drivers here.
TV Karten Digital Devices - Digital Devices Distribution UG (haftungsbeschränkt)

 

[rbo]

AW: No LiveTV after enabling CI (DD Cine2 CI)

Hi lhcomputer,

thanks for the upload.

But for me there's no changes. As soon as I activate the CAM no LiveTV is running.

I'm really frustrated! What else can I do?

Ciao
rbo.