[confirm] No LiveTV after enabling CI (DD Cine2 CI) (1 Viewer)

[shh26_83]

AW: No LiveTV after enabling CI (DD Cine2 CI)

Hi, have anyone a answer to these Problems.
i Have a "AlphaCrypt classic CI Modul" an a SKY-Smartcard from 02.12.2010.
When i activate the CI-Modul in den cineS2-Tool to the Tuner Mediaportal says "Unable to start Graph"!
Disable i the CI-Modul, MP does his work, without Problems.
This problem, i have tested with alle DigitalDevices Drivers.
- DigitalDevices-DVB-Driver-1.4.6.59-x86
- DigitalDevices-DVB-Driver-1.4.7.60-x86
- DigitalDevices-DVB-Driver-2.0.0.21-x86

have one the problem two, or a answer to this problems?


thx
simon

-----

--

--

 

[mm1352000]

Hi everyone

rbo: thank you for posting logs. I can see the following suspicious things:

2010-11-26 08:12:28.762837 [(5)]: dvb: Adding Digital Devices Common Interface 1 to graph
2010-11-26 08:12:28.762837 [(5)]: dvb: Digital Devices Common Interface 1 detected
2010-11-26 08:12:28.762837 [(5)]: dvb: Render [Capture]->[Digital Devices Common Interface 1]
2010-11-26 08:12:47.732470 [(5)]: dvb: Render [Capture]->[Digital Devices Common Interface 1] failed

That doesn't happen all the time, but even when it does, there is always:

2010-11-25 19:38:05.554262 [(5)]: Digital Devices: Common Interface NOT found!

Not good! When you actually try to watch a channel it seems you are getting:

2010-11-25 23:52:43.660038 [(5)]: dvb: RunGraph
2010-11-25 23:52:43.674039 [(5)]: dvb: LockedInOnSignal waiting 20ms
2010-11-25 23:52:43.694040 [(5)]: dvb: LockedInOnSignal waiting 20ms
2010-11-25 23:52:43.714042 [(5)]: dvb: LockedInOnSignal waiting 20ms
2010-11-25 23:52:43.734043 [(5)]: dvb: LockedInOnSignal waiting 20ms
2010-11-25 23:52:43.754044 [(5)]: dvb: LockedInOnSignal waiting 20ms
2010-11-25 23:52:44.374079 [(5)]: dvb: LockedInOnSignal ok
2010-11-25 23:52:44.375079 [(5)]: subch:0 OnGraphStarted
2010-11-25 23:52:44.377079 [(5)]: subch:0 SetupPmtGrabberid 17D4 sid:2B66
2010-11-25 23:52:44.377079 [(5)]: subch:0 set pmt grabber pmt:17D4 sid:2B66
2010-11-25 23:52:44.378080 [(5)]: WaitForPMT: Waiting for PMT 17D4
2010-11-25 23:52:54.380652 [(5)]: WaitForPMT: Timed out waiting for PMT after 10,000572 seconds. Increase the PMT timeout value?
2010-11-25 23:52:54.381652 [(5)]: Setting to 0 to search for new PMT.
2010-11-25 23:52:54.381652 [(5)]: subch:0 SetupPmtGrabberid 0 sid:2B66
2010-11-25 23:52:54.381652 [(5)]: subch:0 set pmt grabber pmt:0 sid:2B66
2010-11-25 23:52:54.382652 [(5)]: WaitForPMT: Waiting for PMT 0
2010-11-25 23:53:04.383224 [(5)]: WaitForPMT: Timed out waiting for PMT after 10,000572 seconds. Increase the PMT timeout value?
2010-11-25 23:53:04.383224 [(5)]: Setting to 0 to search for new PMT.
2010-11-25 23:53:04.386224 [(5)]: card: Tuner locked: True
2010-11-25 23:53:04.386224 [(5)]: **************************************************
2010-11-25 23:53:04.387224 [(5)]: ***** SIGNAL LEVEL: 100, SIGNAL QUALITY: 100 *****
2010-11-25 23:53:04.387224 [(5)]: **************************************************
2010-11-25 23:53:04.387224 [(5)]: card: tuned user: rbo-hfx subchannel: 0
2010-11-25 23:53:04.388224 [(5)]: user:rbo-hfx add
2010-11-25 23:53:04.388224 [(5)]: card2:rbo-hfx 2 0
2010-11-25 23:53:04.389224 [(5)]: Controller: rbo-hfx 2 0
2010-11-25 23:53:04.389224 [(5)]: control2:rbo-hfx 2 0
2010-11-25 23:53:04.392224 [(5)]: Controller: delete timeshift files C:\ProgramData\Team MediaPortal\MediaPortal TV Server\timeshiftbuffer\live2-0.ts
2010-11-25 23:53:04.398225 [(5)]: card: StartTimeShifting 2 C:\ProgramData\Team MediaPortal\MediaPortal TV Server\timeshiftbuffer\live2-0.ts
2010-11-25 23:53:04.399225 [(5)]: card: CAM enabled : False
2010-11-25 23:53:04.399225 [(5)]: start subch:0 No PMT received. Timeshifting failed

However, your logs are really too long to see anything clearly...

As you are all probably aware, morpheus_xx is the expert for DigitalDevices support. If you haven't already, I strongly suggest you post on this thread.

 

[sukceso]

This seems to be exactly the same problem that I reported here:
https://forum.team-mediaportal.com/...nnot-start-same-tv-channel-second-time-90166/

BTW, this problem is not CI related, it also occurs without CI. For me, it only occurs if you want to start watching the same channel that you watched before. It works for me when starting another channel.

 

[mm1352000]

Hi sukceso

Since you're making your own SVN builds your issue could be quite different. I see that morpheus_xx has submitted his patch for the latest driver. Have you tried a new SVN build in the last 24 hours or so to see if that patch fixes things for you?

 

[sukceso]

The problem is not related to CI issues or DD drivers, it still exists in the latest SVN.

morpheus_xx pointed me into the right direction in the other thread:
Go to SetupTv, to your TV card, click "Edit..." and change the radiobutton from "pause..." to "stop...".

The remaining question is, whether there is a bug in the new code preventing DD cards to work in pause mode or whether it would require specific code for DD to make it working or whether the card does not support this feature in general.

 

[Tom92]

Hi @ll,

Currently MP 1.1.2 is running with DD driver 2.0.0.23 and morpheus_xx patch. It works mostly without problems.
But I'm thinking about switching to MP 1.2.0 Alpha.

Is anybody using this config already? My first tries posted earlier were not that successful.
Will MP 1.2.0 Alpha work?