Windows Version: Windows XP (SP2)
CPU Type: Intel Pentium 4 - 2.40GHz
Memory: 1 GB
Motherboard Chipset: IBM (IBM)
Video Card: Asus Agp-v7700 Pure/deluxe
Video Card Driver: 56.55
Sound Card: SoundMAX Integrated Digital Audio
Sound Card AC3: no AC3
Sound Card Driver: 5.12.1.3624
1. TV Card: TechniSat SkyStar 2
1. TV Card Type: DVB-S
1. TV Card Driver: 4.4.0
Video Codec: MPV Decoder Filter
Audio Codec: MPA Decoder Filter
Satelite Provider: Sirius 5E + Hotbird 13E
DISEqC version: 2.0
TV - HTPC Connection: S-Video
Error description
Note: that happens only if LNB1 has been preselected with an external program beforehand (i.e. Setup4PC). If LNB2 has been preselected, MP config scans LNB2 channels only.
By running setup several times (with the different LNBs preselected) one can manage to scan both LNBs. However, MP myTV will show video+audio of the "currently active" LNB only. The other channels will display a blank screen (or "no signal detected" in full screen).
--
avy
CPU Type: Intel Pentium 4 - 2.40GHz
Memory: 1 GB
Motherboard Chipset: IBM (IBM)
Video Card: Asus Agp-v7700 Pure/deluxe
Video Card Driver: 56.55
Sound Card: SoundMAX Integrated Digital Audio
Sound Card AC3: no AC3
Sound Card Driver: 5.12.1.3624
1. TV Card: TechniSat SkyStar 2
1. TV Card Type: DVB-S
1. TV Card Driver: 4.4.0
Video Codec: MPV Decoder Filter
Audio Codec: MPA Decoder Filter
Satelite Provider: Sirius 5E + Hotbird 13E
DISEqC version: 2.0
TV - HTPC Connection: S-Video
Error description
- start setup mediaportal
- go to television > capture cards
- select SkyStar 2 > Edit
- go to autotune
- enter for LNB#1 DISEqC: Level 1 B/A, LNB: Ku-Band, Tone: <empty>, Satellite: Eutelsat Hotbird 1-6
- enable LNB#2
- enter for LNB#2 DISEqC: Level 1 A/A, LNB: Ku-Band, Tone: <empty>, Satellite: Sirius 2/3 & Astra 1A
- click scan and wait till scanning ends
- click OK
Note: that happens only if LNB1 has been preselected with an external program beforehand (i.e. Setup4PC). If LNB2 has been preselected, MP config scans LNB2 channels only.
By running setup several times (with the different LNBs preselected) one can manage to scan both LNBs. However, MP myTV will show video+audio of the "currently active" LNB only. The other channels will display a blank screen (or "no signal detected" in full screen).
--
avy