MediaPortal Version: stable 1.2.1
MediaPortal Skin: default wide
Windows Version: Win7 SP1 x64
CPU Type: Intel Atom D525
HDD: OCZ SSD Agility3 60GB
Memory: 4 GB DDR3
Motherboard: Zotac ID41 ION 2
Video Card: Nvidia ION 2
Video Card Driver: 285.62
Sound Card: onboard realtek
Sound Card AC3: hdmi
Sound Card Driver: newest
1. TV Card: Tevii S660 usb
1. TV Card Type: DVB-S2
1. TV Card Driver: 5.1.6.6 (2011-11-07
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: fddshow
MPEG2 Audio Codec: LAV
h.264 Video Codec: fddshow DXVA
Satelite/CableTV Provider: Astra 19.2°E
HTPC Case: standard white
Cooling: default
Power Supply: default
Remote: MCE
TV: eMachines V700
TV - HTPC Connection: DVI->HDMI
Hi,
I bought myself a new MediaPortal system and the biggest issue atm is that the tv is not working after resuming from standby S3. I attached the logs for the following test cases:
(1) Fresh Windows boot-> open MP -> tv section (tv auto on) -> hit the remote standby button (S3) -> wakeup again -> tv section again. Then after 10 -15 sec I'm getting an error message "Programm/Channel not found" -> try other channel -> same error again
Same as (1) but go directly into S3 without running MediaPortal at first
(2) Fresh Windows boot-> hit the remote standby button (S3) -> wakeup again -> tv section -> Then after 10 -15 sec
error message "Programm/Channel not found" -> try other channel -> same error again
It would be great if you have a solution or tipps for me.
Thanks!
Epstone
MediaPortal Skin: default wide
Windows Version: Win7 SP1 x64
CPU Type: Intel Atom D525
HDD: OCZ SSD Agility3 60GB
Memory: 4 GB DDR3
Motherboard: Zotac ID41 ION 2
Video Card: Nvidia ION 2
Video Card Driver: 285.62
Sound Card: onboard realtek
Sound Card AC3: hdmi
Sound Card Driver: newest
1. TV Card: Tevii S660 usb
1. TV Card Type: DVB-S2
1. TV Card Driver: 5.1.6.6 (2011-11-07
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: fddshow
MPEG2 Audio Codec: LAV
h.264 Video Codec: fddshow DXVA
Satelite/CableTV Provider: Astra 19.2°E
HTPC Case: standard white
Cooling: default
Power Supply: default
Remote: MCE
TV: eMachines V700
TV - HTPC Connection: DVI->HDMI
Hi,
I bought myself a new MediaPortal system and the biggest issue atm is that the tv is not working after resuming from standby S3. I attached the logs for the following test cases:
(1) Fresh Windows boot-> open MP -> tv section (tv auto on) -> hit the remote standby button (S3) -> wakeup again -> tv section again. Then after 10 -15 sec I'm getting an error message "Programm/Channel not found" -> try other channel -> same error again
Same as (1) but go directly into S3 without running MediaPortal at first
(2) Fresh Windows boot-> hit the remote standby button (S3) -> wakeup again -> tv section -> Then after 10 -15 sec
error message "Programm/Channel not found" -> try other channel -> same error again
It would be great if you have a solution or tipps for me.
Thanks!
Epstone