Reply to thread

Message

<blockquote data-quote="mm1352000" data-source="post: 761338" data-attributes="member: 82144">Hi againOkay, a few pointers:1. Disable the EPG grabber while you're testing. It is sometimes trying to use the tuner at the same time as you and that is causing chaos in the logs.2. According to your logs you have only been able to tune GO! on the Avermedia tuners. I don't see any successful tunes of any of the Nine network channels on the Winfast tuner. That may indicate that signal is too weak for that tuner.3. Australian channels are offset by 125 MHz. In other parts of the world the signal is offset by 167 MHz. I suggest you try manually scanning a range of frequencies (maybe 10 MHz steps) between 191.27 MHz (191270 kHz) and 191.83 MHz (191830 kHz) to check whether the tuner automatically checks any offset frequencies.4. How are you splitting your aerial cable? Could you temporarily feed the unsplit signal into the Winfast tuner and see if that makes a difference.5. Disable the Avermedia tuners while testing. The Winfast one seems to be the only one that has problems.mm</blockquote>

[QUOTE="mm1352000, post: 761338, member: 82144"] Hi again Okay, a few pointers: 1. Disable the EPG grabber while you're testing. It is sometimes trying to use the tuner at the same time as you and that is causing chaos in the logs. 2. According to your logs you have only been able to tune GO! on the Avermedia tuners. I don't see any successful tunes of any of the Nine network channels on the Winfast tuner. That may indicate that signal is too weak for that tuner. 3. Australian channels are offset by 125 MHz. In other parts of the world the signal is offset by 167 MHz. I suggest you try manually scanning a range of frequencies (maybe 10 MHz steps) between 191.27 MHz (191270 kHz) and 191.83 MHz (191830 kHz) to check whether the tuner automatically checks any offset frequencies. 4. How are you splitting your aerial cable? Could you temporarily feed the unsplit signal into the Winfast tuner and see if that makes a difference. 5. Disable the Avermedia tuners while testing. The Winfast one seems to be the only one that has problems. mm [/QUOTE]

Verification