Reply to thread

Message

<blockquote data-quote="GregorV" data-source="post: 249375" data-attributes="member: 57522">Hi milagroso,it did not work for me<img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite3" alt=":(" title="Frown&nbsp; &nbsp; :(" loading="lazy" data-shortname=":(" /> I installed the new drivers several time ago with no change.Today I did the steps you suggested and still have the problem that TVServer needs to be restarted several times until it comes up in an operational mode.I can tune all low band channels on my hauppauge and all channels on my digibox.But for tuning high band channels on my Nova I need several restarts of TVService. Sometimes it is working directly but mostly only after 3-5 restarts of the service.As there are no issues when using Transedit, I think there must be something in TVServer. I have the problem with two completely different systems (Intel, AMD) the only common equipment is the dish and the LNB. LNB was already changed. When TVService is in the mode where it cannot tune high band channels I can try to tune a high band channel and during TVServer is trying then as soon as I do the same a the parallel running Transedit session then TVServer immediately shows the channel. This makes me believe that the 22KHz signal is not switched on correctly from TVServer.Instead of using Transedit for switching on the 22KHz signal I also can connect another receiver to the same antenna cable where the hauppauge is connected to. If I then switch the receiver to any high band channel (22KHz on) TVServer can tune high band channels also.Gregor</blockquote>

[QUOTE="GregorV, post: 249375, member: 57522"] Hi milagroso, it did not work for me:( I installed the new drivers several time ago with no change. Today I did the steps you suggested and still have the problem that TVServer needs to be restarted several times until it comes up in an operational mode. I can tune all low band channels on my hauppauge and all channels on my digibox. But for tuning high band channels on my Nova I need several restarts of TVService. Sometimes it is working directly but mostly only after 3-5 restarts of the service. As there are no issues when using Transedit, I think there must be something in TVServer. I have the problem with two completely different systems (Intel, AMD) the only common equipment is the dish and the LNB. LNB was already changed. When TVService is in the mode where it cannot tune high band channels I can try to tune a high band channel and during TVServer is trying then as soon as I do the same a the parallel running Transedit session then TVServer immediately shows the channel. This makes me believe that the 22KHz signal is not switched on correctly from TVServer. Instead of using Transedit for switching on the 22KHz signal I also can connect another receiver to the same antenna cable where the hauppauge is connected to. If I then switch the receiver to any high band channel (22KHz on) TVServer can tune high band channels also. Gregor [/QUOTE]

Verification