Other channels not disabled while recording is on... (1 Viewer)

[MoPhat]

TV-Server Version: 1.0 RC2
MediaPortal Version: 1.0 RC2
MediaPortal Skin: Mono (modifyed Monochrome)
Windows Version: Vista Ultimate 32Bit (SP1) - German
CPU Type: Intel Core 2 Duo 6400
HDD: 300 GB HD + 750GB for TimeShift & TV Recordings
Memory: 2048 MB
Motherboard: ASUS P5VD2-X
Video Card: AMD HD3650 / 1920x1080p 50Hz 32Bit
Video Card Driver: 8.5
Sound Card: AMD HD3650 - HDMI
Sound Card AC3: AMD HD3650 - HDMI
Sound Card Driver:
1. TV Card: FloppyDTV S2
1. TV Card Type: DVB-S2
1. TV Card Driver: 4.5.N
2. TV Card: FloppyDTV S2
2. TV Card Type: DVB-S2
2. TV Card Driver: 4.5.N
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: Cyberlink 7.3 Ultra + latest patch
MPEG2 Audio Codec: MPA - latest from SVN
h.264 Video Codec: Cyberlink 7.3 Ultra + latest patch
Satelite/CableTV Provider: Astra 19.2°E & Hotbird 16°E
HTPC Case: Silverstone LC16M
Cooling: No Fans! (...only 1 for the CPU)
Power Supply: Silent one, without Fans
Remote: Logitech Harmony 785
TV: Samsung LE-46N87BD
TV - HTPC Connection: HDMI

Tested with Blue Two Wide too

if a recording is ongoing and i select the miniguide all cannels are "available" (!!?), if i select a channel from a other transponder then the message is showed that the channel can not be watched etc... of course its recording show!

are this broken or something else?

i had uninstalled all and installed new the RC2 release on 2 machines... same behaviour

can anyone verify this behaviour on his system?

P.s.
Its onyle one tuner active for the moment, one is gone in to the light of the end of the tunnel... rest in piece

thx
MoPhat

 

[grubi]

Not able to reproduce.

I did the following:

1.) Select a channel for watching in myTV
2.) Select Record now
3.) Select MiniEPG

The current channel is shown as recorded
All channels on same transponder are shown as available.
Channels on differnet transponders are shown as not available.
All on a singleseat machine.

Works as expected I would say.

grubi.

 

[Zeee]

I can confirm this..

 

[MoPhat]

So i have now tryed the B2 skin...

and here are the results:


- started watching RTL II (my wife ) - only one tuner active



- scrolled to top of the list where is ARD (other transponder)



???

Should this not be with a disabled icon???

MoPhat

 

[diskeeper]

Should this not be with a disabled icon???

nein, gesperrt wird nur bei aufnahme.

no, is blocked only for record

 

[grubi]

Should this not be with a disabled icon???

MoPhat

You did not say if both screenshots are taken from the same client. If yes then this is what it is supposed to be. If you do this from two different clients the second one should show the channel as not available if only one tuner card is present.

grubi.

 

[infinite.loop]

dont you allready have a simmilar thread running mophat?

i also move this thread to support, since you didnt attach any logfiles.

 

[infinite.loop]

i've been testing this on my singleseat test-system where i can confirm this problem.

View attachment 23159
if I watch a channel, all other channels stay tuneabe which is correct


View attachment 23158
if a recording is in progress on a channel, then ONLY the remaining channels of the same transponder must stay tuneable (if you have no other free card).
in the screenshot above, Super RTL is on a differnt transponder then SAT.1, so it is nottuneable.

 

[gibman]

Is this only happening to singleseat folks ?
Ill test it 2nite.

/gibman

 

[MoPhat]

@infinityloop

thank you for veryfing this prob. the other thread is that no status icon in the miniguide are displayed...

thx
MoPhat