Picture delayed when turning on TV (Sound OK) (2 Viewers)

[azzuro]

For me. I will back to rtsp
I have my server off. When not used. With wol packet for resume

 

[Marcus Venturi]

As I said in my previous reply: it looks like it only happens on the first channel selection after resume. Can either of you confirm that? ...or do you think it also happens at other times as well?

Yes, I can confirm that. As soon as the first channel was tuned everything works fine, till the MediaPortal client is turned off/on again.

 

[azzuro]

it looks like it only happens on the first channel selection after resume

yes. only the first channel afer resume, and on FTA or Encrypted, none difference.

 

[mm1352000]

Thank you.

So the next step is supplying Watchdog debug log files with all plugins disabled.

 

[azzuro]

hello mm
sorry, i provide log but with plugin enabled
the issue apear this morning from 6h51

 

[mm1352000]

Thanks for the log files.

Here is the important part:
[collapse]
[2016-01-22 06:52:00,158] [Log ] [MPMain ] [INFO ] - g_Player.OnStarted() rtsp://TVE-SRV:554/stream15.0 media:TV
[2016-01-22 06:52:00,162] [Log ] [AtmoLight Reinitialise] [INFO ] - AtmoLight: AtmoWinHandler - AtmoWin successfully started.
[2016-01-22 06:52:00,163] [Log ] [AtmoLight Reinitialise] [DEBUG] - AtmoLight: AtmoWinHandler - Trying to connect to AtmoWin.
[2016-01-22 06:52:00,164] [Log ] [AtmoLight Reinitialise] [DEBUG] - AtmoLight: AtmoWinHandler - Getting AtmoWin Remote Control.
[2016-01-22 06:52:00,168] [Log ] [AtmoLight Reinitialise] [DEBUG] - AtmoLight: AtmoWinHandler - Successfully got AtmoWin Remote Control.
[2016-01-22 06:52:00,169] [Log ] [AtmoLight Reinitialise] [DEBUG] - AtmoLight: AtmoWinHandler - Changing AtmoWin effect to: cemLivePicture
[2016-01-22 06:52:00,171] [Log ] [22 ] [DEBUG] - SubtitleRenderer: RESET
[2016-01-22 06:52:00,201] [Log ] [AtmoLight Reinitialise] [INFO ] - AtmoLight: AtmoWinHandler - Successfully changed AtmoWin effect to: cemLivePicture
[2016-01-22 06:52:00,202] [Log ] [AtmoLight Reinitialise] [DEBUG] - AtmoLight: AtmoWinHandler - Getting AtmoWin Live View Control.
[2016-01-22 06:52:00,204] [Log ] [AtmoLight Reinitialise] [DEBUG] - AtmoLight: AtmoWinHandler - Successfully got AtmoWin Live View Control.
[2016-01-22 06:52:00,205] [Log ] [AtmoLight Reinitialise] [DEBUG] - AtmoLight: AtmoWinHandler - Changing AtmoWin Liveview Source to: lvsExternal
[2016-01-22 06:52:00,237] [Log ] [AtmoLight Reinitialise] [INFO ] - AtmoLight: AtmoWinHandler - Successfully changed AtmoWin Liveview Source to: lvsExternal
[2016-01-22 06:52:00,238] [Log ] [AtmoLight Reinitialise] [DEBUG] - AtmoLight: AtmoWinHandler - Getting Liveview Resolution.
[2016-01-22 06:52:00,238] [Log ] [AtmoLight Reinitialise] [DEBUG] - AtmoLight: AtmoWinHandler - Liveview capture resolution is 96x54. Screenshot will be resized to this dimensions.
[2016-01-22 06:52:00,239] [Log ] [AtmoLight Reinitialise] [INFO ] - AtmoLight: AtmoWinHandler - Successfully connected to AtmoWin.
[2016-01-22 06:52:00,239] [Log ] [AtmoLight Reinitialise] [INFO ] - AtmoLight: AtmoWinHandler - Initialising successfull.
[2016-01-22 06:52:00,240] [Log ] [AtmoLight Reinitialise] [INFO ] - AtmoLight: AtmoWinHandler - Reinitialising successfull.
[2016-01-22 06:52:00,240] [Log ] [AtmoLight Reinitialise] [DEBUG] - AtmoLight: AtmoWinHandler - Changing AtmoWin effect to: cemDisabled
[2016-01-22 06:52:00,267] [Log ] [AtmoLight Reinitialise] [INFO ] - AtmoLight: AtmoWinHandler - Successfully changed AtmoWin effect to: cemDisabled
[2016-01-22 06:52:00,289] [Log ] [AtmoLight Reinitialise] [DEBUG] - AtmoLight: AtmoWinHandler - Setting static color to R:0 G:0 B:0.
[2016-01-22 06:52:00,291] [Log ] [AtmoLight Reinitialise] [INFO ] - AtmoLight: AtmoWinHandler - Successfully set static color to R:0 G:0 B:0.
[2016-01-22 06:52:01,112] [Log ] [45 ] [DEBUG] - PlaneScene: PresentImage() dispose surfaces
[2016-01-22 06:52:02,221] [Log ] [PS StandbyWakeup] [DEBUG] - PS: StandbyWakeupThread triggered by check interval
[2016-01-22 06:52:02,221] [Log ] [PS StandbyWakeup] [DEBUG] - PS: New user input detected - set time of last user activity to 06:51:53
[2016-01-22 06:52:02,222] [Log ] [PS StandbyWakeup] [DEBUG] - PS: Signal client activity to the remote TvServer
[2016-01-22 06:52:02,227] [Log ] [PS StandbyWakeup] [DEBUG] - PS: LoadSettings()
[2016-01-22 06:52:02,229] [Log ] [PS StandbyWakeup] [DEBUG] - PS: SetWakeupTimer()
[2016-01-22 06:52:02,229] [Log ] [PS StandbyWakeup] [DEBUG] - PS: No pending events found in the future which should wakeup the system
[2016-01-22 06:52:02,230] [Log ] [PS StandbyWakeup] [DEBUG] - PS: CheckForStandby()
[2016-01-22 06:52:02,232] [Log ] [PS StandbyWakeup] [DEBUG] - PS: User interface is not idle: Media is playing - reset time of last user activity and system idle timer
[2016-01-22 06:52:02,233] [Log ] [PS StandbyWakeup] [DEBUG] - PS: User interface not idle: StandbyPrevented
[2016-01-22 06:52:02,233] [Log ] [PS StandbyWakeup] [DEBUG] - PS: SetStandbyMode(StandbyPrevented)
[2016-01-22 06:52:02,234] [Log ] [PS StandbyWakeup] [INFO ] - PS: System changed from idle state to busy state
[2016-01-22 06:52:02,234] [Log ] [PS StandbyWakeup] [DEBUG] - PS: System is busy and should not go to standby
[2016-01-22 06:52:17,235] [Log ] [PS StandbyWakeup] [DEBUG] - PS: StandbyWakeupThread triggered by check interval
[2016-01-22 06:52:17,235] [Log ] [PS StandbyWakeup] [DEBUG] - PS: Signal client activity to the remote TvServer
[2016-01-22 06:52:17,244] [Log ] [PS StandbyWakeup] [DEBUG] - PS: LoadSettings()
[2016-01-22 06:52:17,245] [Log ] [PS StandbyWakeup] [DEBUG] - PS: SetWakeupTimer()
[2016-01-22 06:52:17,247] [Log ] [PS StandbyWakeup] [DEBUG] - PS: No pending events found in the future which should wakeup the system
[2016-01-22 06:52:17,247] [Log ] [PS StandbyWakeup] [DEBUG] - PS: CheckForStandby()
[2016-01-22 06:52:17,250] [Log ] [PS StandbyWakeup] [DEBUG] - PS: User interface is not idle: Media is playing - reset time of last user activity and system idle timer
[2016-01-22 06:52:17,251] [Log ] [PS StandbyWakeup] [DEBUG] - PS: User interface not idle: StandbyPrevented
[2016-01-22 06:52:17,251] [Log ] [PS StandbyWakeup] [DEBUG] - PS: SetStandbyMode(StandbyPrevented)
[2016-01-22 06:52:17,252] [Log ] [PS StandbyWakeup] [DEBUG] - PS: System is busy and should not go to standby
[2016-01-22 06:52:19,097] [Log ] [MPMain ] [DEBUG] - AtmoLight: Video detected.
[2016-01-22 06:52:19,098] [Log ] [MPMain ] [DEBUG] - AtmoLight: API override is activated.
[2016-01-22 06:52:19,098] [Log ] [MPMain ] [DEBUG] - [WIFI_REMOTE] Playback started!
[2016-01-22 06:52:19,104] [Log ] [MPMain ] [INFO ] - [WIFI_REMOTE] {"Type":"nowplaying","Duration":15,"File":"rtsp://TVE-SRV:554/stream15.0","Position":14,"IsTv":true,"IsFullscreen":false,"MediaInfo":{"MediaType":"tv","MpExtId":"16","MpExtMediaType":12,"MpExtProviderId":0,"ChannelId":16,"ChannelName":"NT1","CurrentProgramId":2715588,"CurrentProgramName":"Télé-achat","CurrentProgramDescription":"Pour faire les boutiques sans sortir de chez soi.","CurrentProgramBegin":"\/Date(1453441500000+0100)\/","CurrentProgramEnd":"\/Date(1453449000000+0100)\/","NextProgramId":2715589,"NextProgramName":"Les défis d'Alfridge","NextProgramDescription":"","NextProgramBegin":"\/Date(1453449000000+0100)\/","NextProgramEnd":"\/Date(1453449300000+0100)\/"}}
[2016-01-22 06:52:19,107] [Log ] [MPMain ] [WARN ] - tvhome:startplay. Phase 2 - 19997 ms - Done starting g_Player.Play()[/collapse]

As you can see, plugins - including AtmoLight and WIFI Remote - are handling the OnStarted() event. This is why I'm asking for the log files with plugins disabled.

 

[azzuro]

I have disabled all this plugin. After this log. But the issue appear more after long sleep period.
Marcus dont use atmolight.
But maybe wifiremote.
So actual mp setting is all plugin off. Except irss andtv series. My wife need it in the afternoon.

 

[Marcus Venturi]

Here are my logs. I will disable the plugins next time when the family is not using the TV...

@azzuro : Not using atmolight (My Philips has Ambilight). And I can confirm that it only happens after long sleep period. If I turn it off and immediately on again, it works.

 

[azzuro]

@mm1352000 :
if i understand fine, the Atmolight must start after :
[2016-01-22 06:52:19,107] [Log ] [MPMain ] [WARN ] - tvhome:startplay. Phase 2 - 19997 ms - Done starting g_Player.Play()

 

[mm1352000]

And I can confirm that it only happens after long sleep period. If I turn it off and immediately on again, it works.

For this reason I prefer you to use the Watchdog tool to collect your log files. It may be important to check the system event log for [example] IP address changes etc.