- November 28, 2010
- 2
- 0
MediaPortal Version: v1.2.0 RC1
MediaPortal Skin: DefaultWide 1.2.0.0
Windows Version: WIN 7 SP1 X64
CPU Type: Athlon X2 BE-2350
HDD: 640GB WD SATA
Memory: 2GB DDR2
Motherboard: Gigabyte M56S-S3
Video Card: Geforce 8500GT
Video Card Driver: 8.17.12.5896
Sound Card: onboard Realtek (ALC888)
Sound Card AC3: no AC3 (not sure)
Sound Card Driver: 6.0.1.6433
1. TV Card: Pinnacle PCTV DualSAT Pro PCI
1. TV Card Type: DVB-S
1. TV Card Driver: 4.2.1.27292
MPEG2 Video Codec: MPC
MPEG2 Audio Codec: MPC
h.264 Video Codec: Microsoft DTV-DVD Video Decoder
Satelite/CableTV Provider: ASTRA
HTPC Case: Custom
Remote: Logitech Harmony one
TV: SAMSUNG LCD
TV - HTPC Connection: DVI
Hello Guys,
after updating Final 1.1.3 to 1.2 RC 1 the following behavior started:
Having a recording running and switching between channels at the same time on the same system works for some time, and then it is states, that there is no card available. However there is one, but it seems to be locked up in idle state. The DVB-S Card is a dual tuner card.
The same phenomena can be caused by using the Test Channel functionality inside the TV-Server setup.
Please find attached the log files of the system as well as the info of the Test Channel page.
The system did not show this behavior with 1.1.3 final.
Hope someone can help me on that issue.
Thanks a lot.
Oliver
MediaPortal Skin: DefaultWide 1.2.0.0
Windows Version: WIN 7 SP1 X64
CPU Type: Athlon X2 BE-2350
HDD: 640GB WD SATA
Memory: 2GB DDR2
Motherboard: Gigabyte M56S-S3
Video Card: Geforce 8500GT
Video Card Driver: 8.17.12.5896
Sound Card: onboard Realtek (ALC888)
Sound Card AC3: no AC3 (not sure)
Sound Card Driver: 6.0.1.6433
1. TV Card: Pinnacle PCTV DualSAT Pro PCI
1. TV Card Type: DVB-S
1. TV Card Driver: 4.2.1.27292
MPEG2 Video Codec: MPC
MPEG2 Audio Codec: MPC
h.264 Video Codec: Microsoft DTV-DVD Video Decoder
Satelite/CableTV Provider: ASTRA
HTPC Case: Custom
Remote: Logitech Harmony one
TV: SAMSUNG LCD
TV - HTPC Connection: DVI
Hello Guys,
after updating Final 1.1.3 to 1.2 RC 1 the following behavior started:
Having a recording running and switching between channels at the same time on the same system works for some time, and then it is states, that there is no card available. However there is one, but it seems to be locked up in idle state. The DVB-S Card is a dual tuner card.
The same phenomena can be caused by using the Test Channel functionality inside the TV-Server setup.
Please find attached the log files of the system as well as the info of the Test Channel page.
The system did not show this behavior with 1.1.3 final.
Hope someone can help me on that issue.
Thanks a lot.
Oliver