- January 7, 2008
- 464
- 42
- Home Country
- Netherlands
Hi,
When I watch a HD video or HD TV with PowerDVD codec, the frame rate is reduced from 50 fps, to 25 or even 24 fps.. Someone here told me to set PDVD11 codec to use DXVA to solve that, but when I do that, it is allways set back to use SW I have PowerDVD10 Ultra completely installed, but also there it is set back to SW after I set it to DXVA in the settings/properties page.
What might be going wrong here? The microsoft decoder does apearently use DXVA (How can I check that, to be sure?)
(I will add a log tonight, however I do not think something can be seen in the MP log, as it is something outside MP I like to adjust)
Below my system corrected (so do not look at the LH side )
Thanks in advance
MediaPortal Version: Mediaportal 1.2.1 Final
MediaPortal Skin: Black Glass Nova HD (last SVN is compatible with MP1.2.1)
Windows Version: Windows 7 Pro 32bit (all important updates)
CPU Type: Intel Core Duo E6600, @2.7Ghz
HDD: Samsung Spinpoint SATA2 500Gb
Memory: 4x1Gb DDR2 800Mhz
Motherboard: Abit fatal1ty I90HD
Video Card: Gainward 4650 1024Mb DDR2
Video Card Driver: ATI CCC 11.8
Sound Card: Realtek HD Audio (on Board)
Sound Card AC3: Realtek HD Audio (on Board)
Sound Card Driver: 1.91
1. TV Card: Digital everywhere FloppyDTV-C/CI
1. TV Card Type: DVB-C
1. TV Card Driver: Setup 5.7
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: PowerDVD11 (TV Microsoft DTV-DVD)
MPEG2 Audio Codec: AC3Filter 6.3 (SPDIF OUT)
h.264 Video Codec: PowerDVD11 (TV Microsoft DTV-DVD)
Satelite/CableTV Provider: Ziggo (8888, former Multikabel)
HTPC Case: Antec Fusion 430 silver
Cooling: Antec tricooler/Scythe Mini Ninja
Power Supply: Antec Fusion 430Watt
Remote: Microsoft MCE RC6
TV: JVC LCD LT32S60
TV - HTPC Connection: HDMI @720P50Hz
When I watch a HD video or HD TV with PowerDVD codec, the frame rate is reduced from 50 fps, to 25 or even 24 fps.. Someone here told me to set PDVD11 codec to use DXVA to solve that, but when I do that, it is allways set back to use SW I have PowerDVD10 Ultra completely installed, but also there it is set back to SW after I set it to DXVA in the settings/properties page.
What might be going wrong here? The microsoft decoder does apearently use DXVA (How can I check that, to be sure?)
(I will add a log tonight, however I do not think something can be seen in the MP log, as it is something outside MP I like to adjust)
Below my system corrected (so do not look at the LH side )
Thanks in advance
MediaPortal Version: Mediaportal 1.2.1 Final
MediaPortal Skin: Black Glass Nova HD (last SVN is compatible with MP1.2.1)
Windows Version: Windows 7 Pro 32bit (all important updates)
CPU Type: Intel Core Duo E6600, @2.7Ghz
HDD: Samsung Spinpoint SATA2 500Gb
Memory: 4x1Gb DDR2 800Mhz
Motherboard: Abit fatal1ty I90HD
Video Card: Gainward 4650 1024Mb DDR2
Video Card Driver: ATI CCC 11.8
Sound Card: Realtek HD Audio (on Board)
Sound Card AC3: Realtek HD Audio (on Board)
Sound Card Driver: 1.91
1. TV Card: Digital everywhere FloppyDTV-C/CI
1. TV Card Type: DVB-C
1. TV Card Driver: Setup 5.7
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: PowerDVD11 (TV Microsoft DTV-DVD)
MPEG2 Audio Codec: AC3Filter 6.3 (SPDIF OUT)
h.264 Video Codec: PowerDVD11 (TV Microsoft DTV-DVD)
Satelite/CableTV Provider: Ziggo (8888, former Multikabel)
HTPC Case: Antec Fusion 430 silver
Cooling: Antec tricooler/Scythe Mini Ninja
Power Supply: Antec Fusion 430Watt
Remote: Microsoft MCE RC6
TV: JVC LCD LT32S60
TV - HTPC Connection: HDMI @720P50Hz