Pro7 and SAT.1 Channels not found/added (1 Viewer)

[chrispi]

Nop... Doesn´t work. I´ve even created new entries in channel list, but I get "No signal!" in MP... What should be the correct parameter configuration of given channel, e.g. Sat.1 HD or Pro7 HD?

Sorry, I think I missunderstood this. The fix only helps for Premiere HD and Discovery HD. With the other HD channels (e.G Pro7 HD, Anixe or SAT.1 HD) I did not have any problems. They worked right from the beginning.

Do you have a S2 card? Maybe you can post your configuration so the Devs can help you.

Regards,
Christoph

 

[duslob]

MediaPortal Version: 0.2.2.0 + SVN
MediaPortal Skin: Blue Wide
Windows Version: XP Media Center 2005
CPU Type: Intel Core 2 Duo E6300
HDD: Seagate 80 GB + 320 GB LAN disk
Memory: 2x512 MB DDRII 800
Motherboard: Gigabyte GA-965P-S3
Motherboard Chipset: Intel 965P
Video Card: MSI NX7600
1. TV Card: TechnoTrend S2-3200
1. TV Card Type: DVB-S
2. TV Card: Technisat AirStar 2
2. TV Card Type: DVB-T
Satelite/CableTV Provider: Satellites @ 13-19-23-28
HTPC Case: Silverstone LC-10
Remote: iMON
TV - HTPC Connection: DVI-I

As I mentioned before, in TT-MediaCenter, the HD channels work fine. But not in MP.

 

[chrispi]

When you scan for channels you have to select "19.2°E Astra HD" to find any HD channels. This means, you have to scan "19.2°E 1D, 1E....." for SD channels and than do a second scan on "19.2°E Astra HD" for HD channels.

I hope, this is the reason for you problem.

Regards,
Christoph

 

[duslob]

When you scan for channels you have to select "19.2°E Astra HD" to find any HD channels. This means, you have to scan "19.2°E 1D, 1E....." for SD channels and than do a second scan on "19.2°E Astra HD" for HD channels.

I hope, this is the reason for you problem.

Regards,
Christoph

OK, thanx. I will try later today.

 

[duslob]

The first thing is there is no additional tuning parameter file *.tpl for HD channels on Astra 19.2. So I created one, but the scan resulted in no channels found, furthermore when I tried to add 8PSK and FEC parameters to the line of given frequency, e scan crashed the configuration app... :-( I am using MP 0.2.2.0 and SVN from 12.1.2007.

I manually configured Astra HD on 12168, V, but no success. It worked with Twinhan DTV SAT-CI...

 

[chrispi]

>>MediaPortal Version: 0.2.2.0 + SVN

Are you sure you are using the new TV Engine 3.0? As far as I know MediaPortal 2.x without the new TV server is currently not capable of displaying HDTV.

I could not find any ".tpl" file in my TV Server installation directory.

Regards,
Christoph

 

[duslob]

So, I've again migrated to TV engine3. I could switch among my four LNBs and to watch the program. However, when I tried to switch to a HD channel it crashed the master database of SQL express server. Now I have to figure out to either restore it or to make a completely fresh SQL server installation...