Austria
MediaPortal Version: MP1.1.0
MediaPortal Skin: Maya
Windows Version: Windows 7 x86 Ultimate
CPU Type: AMD Athlon II X2 235e
HDD: Samsung EcoGreen HD103UI 1TB
Memory: 4GB DDR3-1333
Motherboard: Gigabyte GA-MA785GMT-UD2H
Video Card: onboard Radeon HD4200
Video Card Driver: Catalyst 10.7
Sound Card: onboard RTL889A
Sound Card AC3:
Sound Card Driver: Win7
1. TV Card: Digital Everywhere FloppyDTV S2
1. TV Card Type: DVB-S2
1. TV Card Driver: 5.7
2. TV Card: Digital Everywhere FloppyDTV S2
2. TV Card Type: DVB-S2
2. TV Card Driver: 5.7
MPEG2 Video Codec: SAF 5.00 svn100726
MPEG2 Audio Codec: SAF 5.00 svn100726
h.264 Video Codec: SAF 5.00 svn100726
Satelite/CableTV Provider: Astra 19.2°E
HTPC Case: Lian-Li PC-C36
Cooling: Scythe Shuriken
Power Supply: Fortron FSP250-60GHT
Remote: Logitech Harmony one; Logitech DiNovo Edge; OrigeanAE IR221
TV: Toshiba 37Z3030D
TV - HTPC Connection: HDMI
Hi,
I have problems with MePo since I'm using a USB to RS232 converter for my Samsung 20L203DA5 VFD Display. The converter is based on a FTDI FT232RL chip.
Normally the converter and VFD are running fine but when resuming from standby sometimes the VFD stays black but MePo works fine and doesn't show any error.
Interestingly MePo cannot be stopped then, when exiting MePo the task is still running and killing the process does also nothing. I have to reboot the HTPC to get it working again.
I'm wondering if this is a driver issue because the converter is visible in the device manager and doesn't show any error.
I have tried to set the MePo resume delay to 5 seconds but it didn't help.
The drivers of the converter are the newest: Virtual COM Port Drivers
What can i do to nail the problem down?
Wolfi
MediaPortal Skin: Maya
Windows Version: Windows 7 x86 Ultimate
CPU Type: AMD Athlon II X2 235e
HDD: Samsung EcoGreen HD103UI 1TB
Memory: 4GB DDR3-1333
Motherboard: Gigabyte GA-MA785GMT-UD2H
Video Card: onboard Radeon HD4200
Video Card Driver: Catalyst 10.7
Sound Card: onboard RTL889A
Sound Card AC3:
Sound Card Driver: Win7
1. TV Card: Digital Everywhere FloppyDTV S2
1. TV Card Type: DVB-S2
1. TV Card Driver: 5.7
2. TV Card: Digital Everywhere FloppyDTV S2
2. TV Card Type: DVB-S2
2. TV Card Driver: 5.7
MPEG2 Video Codec: SAF 5.00 svn100726
MPEG2 Audio Codec: SAF 5.00 svn100726
h.264 Video Codec: SAF 5.00 svn100726
Satelite/CableTV Provider: Astra 19.2°E
HTPC Case: Lian-Li PC-C36
Cooling: Scythe Shuriken
Power Supply: Fortron FSP250-60GHT
Remote: Logitech Harmony one; Logitech DiNovo Edge; OrigeanAE IR221
TV: Toshiba 37Z3030D
TV - HTPC Connection: HDMI
Hi,
I have problems with MePo since I'm using a USB to RS232 converter for my Samsung 20L203DA5 VFD Display. The converter is based on a FTDI FT232RL chip.
Normally the converter and VFD are running fine but when resuming from standby sometimes the VFD stays black but MePo works fine and doesn't show any error.
Interestingly MePo cannot be stopped then, when exiting MePo the task is still running and killing the process does also nothing. I have to reboot the HTPC to get it working again.
I'm wondering if this is a driver issue because the converter is visible in the device manager and doesn't show any error.
I have tried to set the MePo resume delay to 5 seconds but it didn't help.
The drivers of the converter are the newest: Virtual COM Port Drivers
What can i do to nail the problem down?
Wolfi