- May 29, 2006
- 3
- 0
I don't get any tv signal. I have do the scan but he don't find a tv signal.
What i'm doing wrong?
What i'm doing wrong?
Pvr-500 with digital tv from kpn(The netherlands) (1 Viewer)
- Thread starter thedarkside
- Start date
Greece
You have to use the SVHS-in connection on your PVR500. The PVR is an analog TV capture card. You can connect an analog COAX cable (like the one you connect your TV on the wall-outlet of the cable-provider) and then you can scan channels, just like your TV or VCR does.
If you want to use a digital TV signal in MP you have to have a Digital Capture Card with a Common Interface wich can handle and decrypt the digital Signal.For KPN-TV currently only the FloppyDTV is available. YOu insert this card in your HTPC and you can watch and record Digital TV.
alternatively you can connect the KPN-TV STB (settuopbox) via a SCART to SVHS cable to you PVR500 (on its SVHS input connection). In MP you can configure your channels to External. Channel switching can be done by a Remote Blaster.
A remote blaster is an IR sender you can program to switch channels.
If you want to use a digital TV signal in MP you have to have a Digital Capture Card with a Common Interface wich can handle and decrypt the digital Signal.For KPN-TV currently only the FloppyDTV is available. YOu insert this card in your HTPC and you can watch and record Digital TV.
alternatively you can connect the KPN-TV STB (settuopbox) via a SCART to SVHS cable to you PVR500 (on its SVHS input connection). In MP you can configure your channels to External. Channel switching can be done by a Remote Blaster.
A remote blaster is an IR sender you can program to switch channels.
Can anyone with the FloppyDTV card receive KPN digital TV, without paying?
That's not to expensive....but te quality of regular TV is fine.
But you're right... I'm going offtopic.
But you're right... I'm going offtopic.
Users who are viewing this thread
Similar threads
Thankyou High_Five, that worked perfectly, I now remember doing that 10 years ago, thanks for jogging my old memory. Cheers Tony
Thankyou High_Five, that worked perfectly, I now remember doing that 10 years ago, thanks for jogging my old memory. Cheers Tony
Hi everyone,
I have been using it For 16 years now (from V1.1.1) and it has worked flawlessly.
I only use TV Series and Moving...
I don't know about MP2 but as you said you tried MP1 too, how is the MP music config ?
MP(1) will only use LAV if you select "Internal DirectShow player" as music output, but then you lose gapless playback.
If you you don't have multichannel music you can choose WASAPI as the output and set the number of speakers to stereo.
I have...
I don't know about MP2 but as you said you tried MP1 too, how is the MP music config ?
MP(1) will only use LAV if you select...
Not sure if this a a bug/config/settings problem.
I am running a media portal 2.5 server with 2.41 client but it seems I get the...
Sorry, I didn't get email notifications on these latest replies. I just came here to report I solved the problem after adjusting power settings for "Intel Graphics". I set it to Maximum Performance. I tried many other things so it could be a combination of them, but this was the last thing I did and I haven't had the problem return...
Sorry, I didn't get email notifications on these latest replies. I just came here to report I solved the problem after adjusting...
I'm running MP1 as a client only on this:
https://www.amazon.com/dp/B0DZX5DWS5?ref_=pe_123509780_1038749300_t_fed_asin_title&th=1...
MP1
MP2
1.38
Running TVService as "NT Service\TVService" or "Local Service" not working anymore since Windows September 2025 updates
DE
Reading through your code, I can see it's more than a couple steps above my paygrade. :cry:
Reading through your code, I can see it's more than a couple steps above my paygrade. :cry:
I used to run the TVService under the "NT Service\TVService" account to follow least privileges principal (not exposing my whole...
Thanks CyberSimian, will give it a try!
Thanks CyberSimian, will give it a try!
I have recently installed mediaportal 1 and all is working fine, however I would like the startup page to be the TV guide. I guess...