RC3 - choppy livetv / no signal / on dvb - thread restart (1 Viewer)

[wunschkind]

hi,

this thread disappeared from the forum .. i will reopen it:



if you have this problems (according to this http://mantis.team-mediaportal.com/view.php?id=697&nbn=5#bugnotes ):

- choppy livestream after some seconds / minutes
- "no signal" after some seconds
- (on my machine the livetv is ok again if i press ALT + RETURN in fullscreen

please write which card do you have and the country you´re living in (i told to dman on IRC and he wants to collect this informations):

here Technotrend budget dvb-c / germany


thank you very much

wunschkind

 

[amnw14545]

Was this deleted for a reason ... Maybe they are sick of DVB ...

Terratec Cinergy 2400i, UK, PureVideo 1.02-185 video + audio.

 

[Paranoid Delusion]

NO THEY ARE NOT

That is why it is in MANTIS and is being treated as a high priority issue if you want better DVB-T support do as i did and used RC2 with a cvs that suites yourselves.
This is work in progress

8)

 

[ohdarklord]

uk dvbt
compro dvb t200
timeshift on

I get lost signal with in 10 seconds or within and hour if im lucky

So far 4 recordings have been ruined because of this and its the only bug i have so im really intrested in helping with this bug

 

[mikey4020]

UK DVB-T
Hauppauge WinTV Nova-T-USB2
Timeshift Enabled

I get a signal but playback is extremely choppy using different codecs

 

[Teebor]

Hi,

I also have a terratec 2400i

My Tv live tv is choppy and stops working after a few seconds with a "no signal" error.

HOWEVER Recorded Tv works fine about 95% of the time. I say 95% because one program recorded for the correct length but only half the show was actually recorded, and then the final credits. Very odd.

Also when the TV goes choppy and I get the "no signal" I have noticed that Media Portal starts to become unresponsive and slow. Its very hard to see but it does do it. CPU Usage however is not spiking or requiring any more than normal.

Is it possibly not a timeshifting error but more an error in hard drive accessing times? perhaps the hard drive is too active and is "overloaded" with data being sent to it and read from it?

It must be quite busy with saving timeshifting info reading the data for the showing of live tv and also windows caching?

 

[dman_lfc]

Let me re-qualify this issue and ask some questions...

We're only concerned about the loss of signal and not being able to access TV again. Please don't muddy the thread with posts about 'choppyness'.

So please post the following or edit your existing posts.
We are interested in...

1. Card Name:
2. Card Type:
3. Country:
4. If you restart MP does the signal come back? (Y/N)
5. If you change channel does the signal come back? (Y/N)
6. Do you require a reboot to be able to use TV? (Y/N)
7. Do you know of any tricks to re-enable TV without restarting / rebooting?

DMAN

 

[carni]

1. Card Name:
FloppyDTV DVB-C

2. Card Type:
DVB-C

3. Country:
Nethetlands (Caiway)

4. If you restart MP does the signal come back? (Y/N)
Y

5. If you change channel does the signal come back? (Y/N)
Sometimes

6. Do you require a reboot to be able to use TV? (Y/N)
N

7. Do you know of any tricks to re-enable TV without restarting / rebooting:
If u go first 2 Radio the signal stay s longer >1hour, in my case the problem is bigger at sertain channels (ned1,ned2 and ned 3)

Recording s r ok

 

[wunschkind]

1. Card Name:
Technotrend budget

2. Card Type:
dvb - c

3. Country:
germany

4. If you restart MP does the signal come back? (Y/N)
Y

5. If you change channel does the signal come back? (Y/N)
y

6. Do you require a reboot to be able to use TV? (Y/N)
N

7. Do you know of any tricks to re-enable TV without restarting / rebooting?
ALT+ENTER (in fullscreen tv) (with the newest SVN this trick does not work anymore)

 

[amnw14545]

1. Card Name: Terratec 2400i DT
2. Card Type: DVB-T
3. Country: UK
4. If you restart MP does the signal come back? Y
5. If you change channel does the signal come back? Y
6. Do you require a reboot to be able to use TV? N
7. Do you know of any tricks to re-enable TV without restarting / rebooting? N

I need to qualify the answers to 6 + 7 by noting that it depends for how long the "no signal" condition has been present.

If I leave MP viewing DVB-T and leave for 8 hours, the entire machine needs to be rebooted, maybe due to the "no signal" condition existing for a long period.

I can easily recover from short periods of "no signal" by changing channel.

Sometimes the channel experiences "no signal" and then recovers by itself (but not very often)

Thanks