Any progress on this bug?
RC3 - choppy livetv / no signal / on dvb - thread restart (1 Viewer)
- Thread starter wunschkind
- Start date
- October 29, 2005
- 5,335
- 4,954
- Home Country
-
Hungary
0. CPU: Celeron 3@3.6
1. Card Name: Winfast TV2000XP Expert
2. Card Type: analog/SW
3. Country: HU
4. If you restart MP does the signal come back? (Y/N) Y
5. If you change channel does the signal come back? (Y/N) Sometimes
6. Do you require a reboot to be able to use TV? (Y/N) Sometimes
7. Do you know of any tricks to re-enable TV without restarting / no
The timeshift is off but the no signal detected occured 1-2 mins after TV is on.
1. Card Name: Winfast TV2000XP Expert
2. Card Type: analog/SW
3. Country: HU
4. If you restart MP does the signal come back? (Y/N) Y
5. If you change channel does the signal come back? (Y/N) Sometimes
6. Do you require a reboot to be able to use TV? (Y/N) Sometimes
7. Do you know of any tricks to re-enable TV without restarting / no
The timeshift is off but the no signal detected occured 1-2 mins after TV is on.
1. Card Name: Hauppauge HVR 1100
2. Card Type: Hybrid, using DVB-T
3. Country: Finland
4. If you restart MP does the signal come back? (Y/N) Y
5. If you change channel does the signal come back? (Y/N) Y
6. Do you require a reboot to be able to use TV? (Y/N) N
7. Do you know of any tricks to re-enable TV without restarting / rebooting? Y. Minimize into toolbar and restore.
I could guess that it is heavily connected into videocard drivers. Using Nvidia FX 5200 that has no picture at all with latest drivers. Took step back and got picture back.
2. Card Type: Hybrid, using DVB-T
3. Country: Finland
4. If you restart MP does the signal come back? (Y/N) Y
5. If you change channel does the signal come back? (Y/N) Y
6. Do you require a reboot to be able to use TV? (Y/N) N
7. Do you know of any tricks to re-enable TV without restarting / rebooting? Y. Minimize into toolbar and restore.
I could guess that it is heavily connected into videocard drivers. Using Nvidia FX 5200 that has no picture at all with latest drivers. Took step back and got picture back.
1. Card Name:FloppyDTV
2. Card Type
VB-S
3. Country:Norway
4. If you restart MP does the signal come back? (Y/N) N
5. If you change channel does the signal come back? (Y/N) N
6. Do you require a reboot to be able to use TV? (Y/N) Y
7. Do you know of any tricks to re-enable TV without restarting / rebooting? N
I tested with TS both on and off. No difference.
Zapped trough channels in tvguide about 10 times before freezing.
Then I tested to just switch between channel 1 and 2 (NRK1 - NRK2)
after about 10 times I got the "no signal" message and MP freezes.
2. Card Type
VB-S3. Country:Norway
4. If you restart MP does the signal come back? (Y/N) N
5. If you change channel does the signal come back? (Y/N) N
6. Do you require a reboot to be able to use TV? (Y/N) Y
7. Do you know of any tricks to re-enable TV without restarting / rebooting? N
I tested with TS both on and off. No difference.
Zapped trough channels in tvguide about 10 times before freezing.
Then I tested to just switch between channel 1 and 2 (NRK1 - NRK2)
after about 10 times I got the "no signal" message and MP freezes.
Same Bug + wrong DVB-T datas
1. Card Name: Hauppauge and Pinnacle
2. Card Type: Nova-T PCI and 300i
3. Country: FR
4. If you restart MP does the signal come back? (Y/N) Y
5. If you change channel does the signal come back? (Y/N) Sometimes
6. Do you require a reboot to be able to use TV? (Y/N) N
7. Do you know of any tricks to re-enable TV without restarting / rebooting? Switch channels in guide
After this bug "no signal", i launched "Mediaportal Setup" and i go to "TV Channel". 167 KHz wad added to carrier frequency of some channels. I reenter the right frequency and and relaunch "Mediaportal" and all is OK.
I tried the fonction "Export" in "TV Channel" and after an import: the DVB-T datas of all channels were wrong.
For the bug "no signal", i launch mediaportal with "high priority with "start /high mediaportal.exe" and i have less problem.
For your information, i have two DVB-T Card:
Hauppauge PCI Nova-T and a Pinnacle Mediacenter 300i.
When i scan with the hauppauge, i detect all 28 french channels with the right carrier frequency. I rename all channels with "H_<Channel name>"
When i scan with the Pinnacle, I detect all 28 french channels with "the right carrier frequency + 167 khZ". I rename all channels with "P_<Channel name>"
I create 2 groups Hauppage et Pinnacle. I put all "H_*" channels in hauppauge group and all "P_*" channels in Pinnacle group.
In Mediaportal TV, when i change channel and group to see TV, sometime some DVB-T datas became wrong and I can't see some channel... I must re-enter in "mediaportal setup" to correct information (Carrier frequency)... I don't know why...
Sorry for my poor english..
1. Card Name: Hauppauge and Pinnacle
2. Card Type: Nova-T PCI and 300i
3. Country: FR
4. If you restart MP does the signal come back? (Y/N) Y
5. If you change channel does the signal come back? (Y/N) Sometimes
6. Do you require a reboot to be able to use TV? (Y/N) N
7. Do you know of any tricks to re-enable TV without restarting / rebooting? Switch channels in guide
After this bug "no signal", i launched "Mediaportal Setup" and i go to "TV Channel". 167 KHz wad added to carrier frequency of some channels. I reenter the right frequency and and relaunch "Mediaportal" and all is OK.
I tried the fonction "Export" in "TV Channel" and after an import: the DVB-T datas of all channels were wrong.
For the bug "no signal", i launch mediaportal with "high priority with "start /high mediaportal.exe" and i have less problem.
For your information, i have two DVB-T Card:
Hauppauge PCI Nova-T and a Pinnacle Mediacenter 300i.
When i scan with the hauppauge, i detect all 28 french channels with the right carrier frequency. I rename all channels with "H_<Channel name>"
When i scan with the Pinnacle, I detect all 28 french channels with "the right carrier frequency + 167 khZ". I rename all channels with "P_<Channel name>"
I create 2 groups Hauppage et Pinnacle. I put all "H_*" channels in hauppauge group and all "P_*" channels in Pinnacle group.
In Mediaportal TV, when i change channel and group to see TV, sometime some DVB-T datas became wrong and I can't see some channel... I must re-enter in "mediaportal setup" to correct information (Carrier frequency)... I don't know why...
Sorry for my poor english..
1. Card Name: Ultraview DVB-T Plus (DVico)
2. Card Type: DVB-T
3. Country: AU
4. If you restart MP does the signal come back? (Y/N) Y
5. If you change channel does the signal come back? (Y/N) Sometimes
6. Do you require a reboot to be able to use TV? (Y/N) N
7. Do you know of any tricks to re-enable TV without restarting / rebooting? Toggle TV On/Off or TS On/Off.
I loose signal on a regular basis mainly on PRIME which is a regional of SEVEN. Toggle TV On/Off usually fixes this. I have attached a log when changing from SBS2 (News) to PRIME. Black screen, then "No Signal Detected" Whenever I receive this error I always see "VMR9 stopped" in the logs.
Hope this helps resolve this issue. If you need any more logs etc let me know.
[Log]
20/04/2006 9:25:50 AM Navigator:ZapNext SBS2->PRIME
20/04/2006 9:25:50 AM UpdateOSD()
20/04/2006 9:25:50 AM 1 VMR9Helper: repaint->playing 51
20/04/2006 9:25:52 AM Channel changeRIME
20/04/2006 9:25:52 AM GUITVHome.ViewChannel(): View channel=PRIME ts:True
20/04/2006 9:25:52 AM g_Player.Stop()
20/04/2006 9:25:52 AM g_Player.OnStopped()
20/04/2006 9:25:52 AM StreamBufferPlayer9:cleanup DShow graph False
20/04/2006 9:25:52 AM StreamBufferPlayer9: vmr9 disable
20/04/2006 9:25:52 AM StreamBufferPlayer9: vmr9 dispose
20/04/2006 9:25:52 AM 1 vmr9ispose
20/04/2006 9:25:52 AM VMR9: not active
20/04/2006 9:25:52 AM PlaneScene: PresentImage() dispose surfaces
20/04/2006 9:25:52 AM PlaneScene: PresentImage() dispose surfaces
20/04/2006 9:25:52 AM StreamBufferPlayer9:cleanup done
20/04/2006 9:25:52 AM StreamBufferPlayer9:grapbuilder=null
20/04/2006 9:25:52 AM add cmd:MediaPortal.TV.Recording.TimeShiftTvCommand #1
20/04/2006 9:25:52 AM RecordertartTimeshift tv PRIME
20/04/2006 9:25:52 AM Recorder: Found card:UltraView HDTV DVB-T Plus
20/04/2006 9:25:52 AM Commandtop all card except card:0
20/04/2006 9:25:52 AM Recorder: tv channel changedRIME
20/04/2006 9:25:52 AM teletext: clear teletext cache
20/04/2006 9:25:52 AM TVCapture: change channel toRIME
20/04/2006 9:25:52 AM DVBGraph: ShouldRebuildGraph(PRIME) current ac3:False new channel ac3:True
20/04/2006 9:25:52 AM TvCaptureDevice:RebuildGraph() Card:1 chanRIME
20/04/2006 9:25:52 AM DVBGraph: StopTimeShifting()
20/04/2006 9:25:52 AM TvCaptureDevice:RebuildGraph() recreate timeshifting graph
20/04/2006 9:25:52 AM DVBGraphtartTimeShifting() PRIME
20/04/2006 9:25:52 AM DVBGraph: tuning details: frequency:704500 kHz ONID:12930 TSID:2480 SID:2410 providerRIME
20/04/2006 9:25:52 AM DVBGraph: channel PRIME uses AC3
20/04/2006 9:25:52 AM DVBGraph). StartTimeShifting: ac3=True
20/04/2006 9:25:53 AM DVBGraph:TuneChannel() tune to channel:15
20/04/2006 9:25:53 AM DVBGraph: tuning details: frequency:704500 kHz ONID:12930 TSID:2480 SID:2410 providerRIME
20/04/2006 9:25:53 AM DVBGraphBDAubmitTuneRequest() frequency:704500 kHz Bandwidth:7 ONID:12930 TSID:2480, SID:2410
20/04/2006 9:25:54 AM DVBGraphetHardwarePidFiltering to:0,1,10,11,12,D3,D2,11F8,11F9,11FA,1CC,11FD,
20/04/2006 9:25:54 AM DVBGraphBDA: signal strength:0 signal quality:82 signal present:True locked:True
20/04/2006 9:25:54 AM DVBDemuxerRIME audio:11F9 video:11F8 teletext:11FD pmt:1CC subtitle:0 program:2410
20/04/2006 9:25:54 AM DVBGraph:TuneChannel done signal strength:0 signal quality:82 locked:True
20/04/2006 9:25:54 AM teletext: grab teletext for card:UltraView HDTV DVB-T Plus
20/04/2006 9:25:54 AM Recorder: tv channel changedRIME
20/04/2006 9:25:54 AM teletext: clear teletext cache
20/04/2006 9:25:54 AM Command:MediaPortal.TV.Recording.TimeShiftTvCommand time:2156.25 msec
20/04/2006 9:25:54 AM Recorder: Card:UltraView HDTV DVB-T Plus timeshift tv channelRIME
20/04/2006 9:25:55 AM window:MediaPortal.GUI.TV.GUITVZAPOSD deinit
20/04/2006 9:25:55 AM texturemanager:CleanupThumbs()
20/04/2006 9:25:55 AM ZAP OSD:Off timeout
20/04/2006 9:26:04 AM wait for pmt :-1
20/04/2006 9:26:04 AM Recorder: start viewing timeshift file of card UltraView HDTV DVB-T Plus
20/04/2006 9:26:04 AM Playlistplayer.StartFile(D:\Mediaportal\Recordings\card1\live.tv)
20/04/2006 9:26:04 AM add cmd:MediaPortal.TV.Recording.StopRadioCommand #1
20/04/2006 9:26:04 AM g_Player.Play(D:\Mediaportal\Recordings\card1\live.tv)
20/04/2006 9:26:04 AM Streambufferplayer play:\Mediaportal\Recordings\card1\live.tv
20/04/2006 9:26:04 AM StreamBufferPlayerlay D:\Mediaportal\Recordings\card1\live.tv
20/04/2006 9:26:04 AM Commandtop radio
20/04/2006 9:26:04 AM Command:MediaPortal.TV.Recording.StopRadioCommand time:15.625 msec
20/04/2006 9:26:05 AM Recorder: Card:UltraView HDTV DVB-T Plus timeshift tv channelRIME
20/04/2006 9:26:05 AM StreamBufferPlayer9:grapbuilder=null
20/04/2006 9:26:05 AM StreamBufferPlayer9: GetInterfaces()
20/04/2006 9:26:05 AM goto fullscreen:False
20/04/2006 9:26:05 AM 1 vmr9:ctor()
20/04/2006 9:26:05 AM 1 vmr9:ctor() done:True
20/04/2006 9:26:05 AM 1 vmr9:addvmr9
20/04/2006 9:26:05 AM VMR9: enable YUV mixing
20/04/2006 9:26:05 AM VMR9: now active
20/04/2006 9:26:05 AM 1 VMR9Helper:Vmr9 Added
20/04/2006 9:26:05 AM add filter:Mpeg2Dec Filter to graph
20/04/2006 9:26:05 AM added filter:Mpeg2Dec Filter to graph
20/04/2006 9:26:05 AM add filter:MPEG/AC3/DTS/LPCM Audio Decoder to graph
20/04/2006 9:26:05 AM added filter:MPEG/AC3/DTS/LPCM Audio Decoder to graph
20/04/2006 9:26:05 AM got pins
20/04/2006 9:26:05 AM got pin#0VR Out - 1
20/04/2006 9:26:05 AM planescene: PresentImage()
20/04/2006 9:26:05 AM PlaneScene: PresentImage() dispose surfaces
20/04/2006 9:26:05 AM planescene: PresentImage()
20/04/2006 9:26:05 AM PlaneScene: PresentImage() dispose surfaces
20/04/2006 9:26:05 AM planescene: PresentImage()
20/04/2006 9:26:05 AM PlaneScene: PresentImage() dispose surfaces
20/04/2006 9:26:05 AM render ok
20/04/2006 9:26:05 AM got pin#1VR Out - 2
20/04/2006 9:26:05 AM planescene: PresentImage()
20/04/2006 9:26:05 AM PlaneScene: PresentImage() dispose surfaces
20/04/2006 9:26:05 AM planescene: PresentImage()
20/04/2006 9:26:05 AM PlaneScene: PresentImage() dispose surfaces
20/04/2006 9:26:06 AM render ok
20/04/2006 9:26:06 AM g_Player.OnStarted() D:\Mediaportal\Recordings\card1\live.tv media:TV
20/04/2006 9:26:06 AM 1 VMR9Helper: playing->repaint 50
20/04/2006 9:26:06 AM 1 VMR9Helper: repaint->playing 50
20/04/2006 9:26:08 AM 1 VMR9Helper: playing->repaint 0
20/04/2006 9:26:10 AM DVBGraphBDA: VMR9 stopped quality:92 strength:0 locked:True fps:0
20/04/2006 9:26:10 AM wait for pmt :-1
20/04/2006 9:26:10 AM DVBGraph:Got PMT version:19
20/04/2006 9:26:10 AM DVBGraph: OnPMTIsChanged:database\pmt\pmt_PRIME_12930_2480_2410_5.dat
20/04/2006 9:26:10 AM WindowManager:route MediaPortal.GUI.TV.GUIFullScreenTV:602->MediaPortal.Dialogs.GUIDialogNotify:2016
20/04/2006 9:26:10 AM window:MediaPortal.Dialogs.GUIDialogNotify init
20/04/2006 9:26:10 AM DVBGraphendPMT() set demux: video pid:A64 audio pid:A65 AC3 pid:0 audio1 pid:A65 audio2 pid:0 audio3 pid:0 subtitle pid:FFFFFFFF teletext pid:0 pcr pid:A64
20/04/2006 9:26:10 AM DVBDemuxerRIME audio:A65 video:A64 teletext:0 pmt:1CC subtitle:0 program:2410
20/04/2006 9:26:10 AM DVBGraphetHardwarePidFiltering to:0,1,10,11,12,D3,D2,A64,A65,1CC,
20/04/2006 9:26:10 AM update dvbt channelRIME
20/04/2006 9:26:10 AM DVBGraph: grab epg for PRIME
20/04/2006 9:26:12 AM planescene: PresentSurface() frame:0 enabled:True allowed:False
20/04/2006 9:26:12 AM 1 VMR9Helper: repaint->playing 1
20/04/2006 9:26:13 AM 1 VMR9Helper: playing->repaint 1
20/04/2006 9:26:15 AM WindowManager:unroute to MediaPortal.Dialogs.GUIDialogNotify:2016->MediaPortal.GUI.TV.GUIFullScreenTV:602
20/04/2006 9:26:15 AM Notify MessageRIME, No signal detected!
20/04/2006 9:26:15 AM DVBGraphBDA: VMR9 stopped quality:92 strength:0 locked:True fps:0
20/04/2006 9:26:20 AM DVBGraphBDA: VMR9 stopped quality:93 strength:0 locked:True fps:0
20/04/2006 9:26:21 AM fullscreentv:show gui
20/04/2006 9:26:21 AM Windowmanager:goto previous window
20/04/2006 9:26:21 AM deinit->OSD:Off
20/04/2006 9:26:21 AM window:MediaPortal.GUI.TV.GUIFullScreenTV deinit
20/04/2006 9:26:21 AM texturemanager:CleanupThumbs()
20/04/2006 9:26:21 AM window:MediaPortal.GUI.TV.GUITVGuide init
20/04/2006 9:26:21 AM turn tv on
20/04/2006 9:26:22 AM Windowmanager:goto previous window
20/04/2006 9:26:22 AM window:MediaPortal.GUI.TV.GUITVGuide deinit
20/04/2006 9:26:22 AM texturemanager:CleanupThumbs()
20/04/2006 9:26:22 AM window:MediaPortal.GUI.Music.GUIMusicFiles init
20/04/2006 9:26:23 AM Windowmanager:goto previous window
20/04/2006 9:26:23 AM window:MediaPortal.GUI.Music.GUIMusicFiles deinit
20/04/2006 9:26:23 AM texturemanager:CleanupThumbs()
20/04/2006 9:26:23 AM window:MediaPortal.GUI.TV.GUIFullScreenTV init
20/04/2006 9:26:23 AM start fullscreen channelRIME
20/04/2006 9:26:23 AM init->OSD:Off
20/04/2006 9:26:23 AM fullscreentv:show gui
20/04/2006 9:26:23 AM Windowmanager:goto previous window
20/04/2006 9:26:23 AM deinit->OSD:Off
20/04/2006 9:26:23 AM window:MediaPortal.GUI.TV.GUIFullScreenTV deinit
20/04/2006 9:26:23 AM texturemanager:CleanupThumbs()
20/04/2006 9:26:23 AM window:MediaPortal.GUI.TV.GUITVHome init
20/04/2006 9:26:23 AM tv home initRIME
20/04/2006 9:26:23 AM GUITVHome.ViewChannel(): View channel=PRIME ts:True
20/04/2006 9:26:24 AM Windowmanager:goto previous window
20/04/2006 9:26:24 AM window:MediaPortal.GUI.TV.GUITVHome deinit
20/04/2006 9:26:24 AM texturemanager:CleanupThumbs()
20/04/2006 9:26:24 AM window:MediaPortal.GUI.Home.HomeWindow init
20/04/2006 9:26:24 AM Windowmanager:goto previous window
20/04/2006 9:26:25 AM DVBGraphBDA: VMR9 stopped quality:93 strength:0 locked:True fps:0
20/04/2006 9:26:26 AM MediaPortal action exit()
20/04/2006 9:26:26 AM MediaPortal.FrameMove stopping()
20/04/2006 9:26:26 AM g_Player.Stop()
20/04/2006 9:26:26 AM g_Player.OnStopped()
20/04/2006 9:26:26 AM StreamBufferPlayer9:cleanup DShow graph False
20/04/2006 9:26:26 AM StreamBufferPlayer9: vmr9 disable
20/04/2006 9:26:26 AM StreamBufferPlayer9: vmr9 dispose
20/04/2006 9:26:26 AM 1 vmr9ispose
20/04/2006 9:26:26 AM VMR9: not active
20/04/2006 9:26:26 AM planescene: PresentImage()
20/04/2006 9:26:26 AM PlaneScene: PresentImage() dispose surfaces
20/04/2006 9:26:26 AM planescene: PresentImage()
20/04/2006 9:26:26 AM PlaneScene: PresentImage() dispose surfaces
20/04/2006 9:26:26 AM StreamBufferPlayer9:cleanup done
20/04/2006 9:26:26 AM StreamBufferPlayer9:grapbuilder=null
20/04/2006 9:26:26 AM GUIFont:texture disposing:0 debug
20/04/2006 9:26:26 AM GUIFont:texture disposing:1 font10
20/04/2006 9:26:26 AM GUIFont:texture disposing:2 font12
20/04/2006 9:26:26 AM GUIFont:texture disposing:3 font13
20/04/2006 9:26:26 AM GUIFont:texture disposing:4 font14
20/04/2006 9:26:26 AM GUIFont:texture disposing:5 font16
20/04/2006 9:26:26 AM GUIFont:texture disposing:6 font18
20/04/2006 9:26:26 AM GUIFont:texture disposing:7 dingbats
20/04/2006 9:26:26 AM GUIFont:texture disposing:8 font32
20/04/2006 9:26:26 AM GUIFont:texture disposing:9 font48
20/04/2006 9:26:26 AM GUIFont:texture disposing:10 font72
20/04/2006 9:26:26 AM GUIFont:texture disposing:11 fontSVT
20/04/2006 9:26:26 AM TexturePacker: disposing texture:199
20/04/2006 9:26:26 AM TexturePacker: disposing texture:198
20/04/2006 9:26:27 AM MediaPortal.OnExit()
20/04/2006 9:26:27 AM Recordertop all tuners
20/04/2006 9:26:27 AM Recordertop card:UltraView HDTV DVB-T Plus
20/04/2006 9:26:27 AM TVCapture.Stop() Card:1
20/04/2006 9:26:27 AM TVCapture.StopTimeShifting() Card:1
20/04/2006 9:26:27 AM DVBGraph: StopTimeShifting()
20/04/2006 9:26:27 AM TVCapture.DeleteGraph() Card:1
20/04/2006 9:26:27 AM DVBGraphBDAeleteGraph(). ac3=false
20/04/2006 9:26:27 AM DVBGraphBDAeleteGraph()
20/04/2006 9:26:27 AM DVBDemuxer: audio:0 video:0 teletext:0 pmt:0 subtitle:0 program:-1
20/04/2006 9:26:27 AM DVBGraphBDA:ReleaseComObject(m_StreamBufferSink):-1
20/04/2006 9:26:27 AM DVBGraphBDA:ReleaseComObject(m_StreamBufferConfig):-1
20/04/2006 9:26:27 AM Commandprocessor stopped
20/04/2006 9:26:27 AM PlugInManager.Stop()
20/04/2006 9:26:27 AM PluginManager: stopping MediaPortal.MyKeys.MyKeys
20/04/2006 9:26:27 AM Keyboard extensions disabled
20/04/2006 9:26:27 AM PluginManager: stopping ProcessPlugins.DiskSpace.RecordingManagement
20/04/2006 9:26:27 AM PluginManager: stopping ProcessPlugins.DiskSpace.EpisodeManagement
20/04/2006 9:26:27 AM PluginManager: stopping ProcessPlugins.DiskSpace.DiskManagement
20/04/2006 9:26:27 AM PluginManager: stopping ProcessPlugins.TVNotifies.NotifyManager
20/04/2006 9:26:27 AM fonts.Dispose()
20/04/2006 9:26:27 AM MediaPortal done
20/04/2006 9:26:27 AM dbs:close:musicdatabase5.db3
20/04/2006 9:26:27 AM dbs:close:FolderDatabase3.db3
20/04/2006 9:26:27 AM dbs:close:VideoDatabaseV5.db3
20/04/2006 9:26:27 AM dbs:close:TVDatabaseV21.db3
20/04/2006 9:26:27 AM dbs:closerogramDatabaseV4.db3
2. Card Type: DVB-T
3. Country: AU
4. If you restart MP does the signal come back? (Y/N) Y
5. If you change channel does the signal come back? (Y/N) Sometimes
6. Do you require a reboot to be able to use TV? (Y/N) N
7. Do you know of any tricks to re-enable TV without restarting / rebooting? Toggle TV On/Off or TS On/Off.
I loose signal on a regular basis mainly on PRIME which is a regional of SEVEN. Toggle TV On/Off usually fixes this. I have attached a log when changing from SBS2 (News) to PRIME. Black screen, then "No Signal Detected" Whenever I receive this error I always see "VMR9 stopped" in the logs.
Hope this helps resolve this issue. If you need any more logs etc let me know.
[Log]
20/04/2006 9:25:50 AM Navigator:ZapNext SBS2->PRIME
20/04/2006 9:25:50 AM UpdateOSD()
20/04/2006 9:25:50 AM 1 VMR9Helper: repaint->playing 51
20/04/2006 9:25:52 AM Channel change
RIME20/04/2006 9:25:52 AM GUITVHome.ViewChannel(): View channel=PRIME ts:True
20/04/2006 9:25:52 AM g_Player.Stop()
20/04/2006 9:25:52 AM g_Player.OnStopped()
20/04/2006 9:25:52 AM StreamBufferPlayer9:cleanup DShow graph False
20/04/2006 9:25:52 AM StreamBufferPlayer9: vmr9 disable
20/04/2006 9:25:52 AM StreamBufferPlayer9: vmr9 dispose
20/04/2006 9:25:52 AM 1 vmr9
ispose20/04/2006 9:25:52 AM VMR9: not active
20/04/2006 9:25:52 AM PlaneScene: PresentImage() dispose surfaces
20/04/2006 9:25:52 AM PlaneScene: PresentImage() dispose surfaces
20/04/2006 9:25:52 AM StreamBufferPlayer9:cleanup done
20/04/2006 9:25:52 AM StreamBufferPlayer9:grapbuilder=null
20/04/2006 9:25:52 AM add cmd:MediaPortal.TV.Recording.TimeShiftTvCommand #1
20/04/2006 9:25:52 AM Recorder
tartTimeshift tv PRIME20/04/2006 9:25:52 AM Recorder: Found card:UltraView HDTV DVB-T Plus
20/04/2006 9:25:52 AM Command
top all card except card:020/04/2006 9:25:52 AM Recorder: tv channel changed
RIME20/04/2006 9:25:52 AM teletext: clear teletext cache
20/04/2006 9:25:52 AM TVCapture: change channel to
RIME20/04/2006 9:25:52 AM DVBGraph: ShouldRebuildGraph(PRIME) current ac3:False new channel ac3:True
20/04/2006 9:25:52 AM TvCaptureDevice:RebuildGraph() Card:1 chan
RIME20/04/2006 9:25:52 AM DVBGraph: StopTimeShifting()
20/04/2006 9:25:52 AM TvCaptureDevice:RebuildGraph() recreate timeshifting graph
20/04/2006 9:25:52 AM DVBGraph
tartTimeShifting() PRIME20/04/2006 9:25:52 AM DVBGraph: tuning details: frequency:704500 kHz ONID:12930 TSID:2480 SID:2410 provider
RIME20/04/2006 9:25:52 AM DVBGraph: channel PRIME uses AC3
20/04/2006 9:25:52 AM DVBGraph
). StartTimeShifting: ac3=True20/04/2006 9:25:53 AM DVBGraph:TuneChannel() tune to channel:15
20/04/2006 9:25:53 AM DVBGraph: tuning details: frequency:704500 kHz ONID:12930 TSID:2480 SID:2410 provider
RIME20/04/2006 9:25:53 AM DVBGraphBDA
ubmitTuneRequest() frequency:704500 kHz Bandwidth:7 ONID:12930 TSID:2480, SID:241020/04/2006 9:25:54 AM DVBGraph
etHardwarePidFiltering to:0,1,10,11,12,D3,D2,11F8,11F9,11FA,1CC,11FD,20/04/2006 9:25:54 AM DVBGraphBDA: signal strength:0 signal quality:82 signal present:True locked:True
20/04/2006 9:25:54 AM DVBDemuxer
RIME audio:11F9 video:11F8 teletext:11FD pmt:1CC subtitle:0 program:241020/04/2006 9:25:54 AM DVBGraph:TuneChannel done signal strength:0 signal quality:82 locked:True
20/04/2006 9:25:54 AM teletext: grab teletext for card:UltraView HDTV DVB-T Plus
20/04/2006 9:25:54 AM Recorder: tv channel changed
RIME20/04/2006 9:25:54 AM teletext: clear teletext cache
20/04/2006 9:25:54 AM Command:MediaPortal.TV.Recording.TimeShiftTvCommand time:2156.25 msec
20/04/2006 9:25:54 AM Recorder: Card:UltraView HDTV DVB-T Plus timeshift tv channel
RIME20/04/2006 9:25:55 AM window:MediaPortal.GUI.TV.GUITVZAPOSD deinit
20/04/2006 9:25:55 AM texturemanager:CleanupThumbs()
20/04/2006 9:25:55 AM ZAP OSD:Off timeout
20/04/2006 9:26:04 AM wait for pmt :-1
20/04/2006 9:26:04 AM Recorder: start viewing timeshift file of card UltraView HDTV DVB-T Plus
20/04/2006 9:26:04 AM Playlistplayer.StartFile(D:\Mediaportal\Recordings\card1\live.tv)
20/04/2006 9:26:04 AM add cmd:MediaPortal.TV.Recording.StopRadioCommand #1
20/04/2006 9:26:04 AM g_Player.Play(D:\Mediaportal\Recordings\card1\live.tv)
20/04/2006 9:26:04 AM Streambufferplayer play
:\Mediaportal\Recordings\card1\live.tv20/04/2006 9:26:04 AM StreamBufferPlayer
lay D:\Mediaportal\Recordings\card1\live.tv20/04/2006 9:26:04 AM Command
top radio20/04/2006 9:26:04 AM Command:MediaPortal.TV.Recording.StopRadioCommand time:15.625 msec
20/04/2006 9:26:05 AM Recorder: Card:UltraView HDTV DVB-T Plus timeshift tv channel
RIME20/04/2006 9:26:05 AM StreamBufferPlayer9:grapbuilder=null
20/04/2006 9:26:05 AM StreamBufferPlayer9: GetInterfaces()
20/04/2006 9:26:05 AM goto fullscreen:False
20/04/2006 9:26:05 AM 1 vmr9:ctor()
20/04/2006 9:26:05 AM 1 vmr9:ctor() done:True
20/04/2006 9:26:05 AM 1 vmr9:addvmr9
20/04/2006 9:26:05 AM VMR9: enable YUV mixing
20/04/2006 9:26:05 AM VMR9: now active
20/04/2006 9:26:05 AM 1 VMR9Helper:Vmr9 Added
20/04/2006 9:26:05 AM add filter:Mpeg2Dec Filter to graph
20/04/2006 9:26:05 AM added filter:Mpeg2Dec Filter to graph
20/04/2006 9:26:05 AM add filter:MPEG/AC3/DTS/LPCM Audio Decoder to graph
20/04/2006 9:26:05 AM added filter:MPEG/AC3/DTS/LPCM Audio Decoder to graph
20/04/2006 9:26:05 AM got pins
20/04/2006 9:26:05 AM got pin#0
VR Out - 120/04/2006 9:26:05 AM planescene: PresentImage()
20/04/2006 9:26:05 AM PlaneScene: PresentImage() dispose surfaces
20/04/2006 9:26:05 AM planescene: PresentImage()
20/04/2006 9:26:05 AM PlaneScene: PresentImage() dispose surfaces
20/04/2006 9:26:05 AM planescene: PresentImage()
20/04/2006 9:26:05 AM PlaneScene: PresentImage() dispose surfaces
20/04/2006 9:26:05 AM render ok
20/04/2006 9:26:05 AM got pin#1
VR Out - 220/04/2006 9:26:05 AM planescene: PresentImage()
20/04/2006 9:26:05 AM PlaneScene: PresentImage() dispose surfaces
20/04/2006 9:26:05 AM planescene: PresentImage()
20/04/2006 9:26:05 AM PlaneScene: PresentImage() dispose surfaces
20/04/2006 9:26:06 AM render ok
20/04/2006 9:26:06 AM g_Player.OnStarted() D:\Mediaportal\Recordings\card1\live.tv media:TV
20/04/2006 9:26:06 AM 1 VMR9Helper: playing->repaint 50
20/04/2006 9:26:06 AM 1 VMR9Helper: repaint->playing 50
20/04/2006 9:26:08 AM 1 VMR9Helper: playing->repaint 0
20/04/2006 9:26:10 AM DVBGraphBDA: VMR9 stopped quality:92 strength:0 locked:True fps:0
20/04/2006 9:26:10 AM wait for pmt :-1
20/04/2006 9:26:10 AM DVBGraph:Got PMT version:19
20/04/2006 9:26:10 AM DVBGraph: OnPMTIsChanged:database\pmt\pmt_PRIME_12930_2480_2410_5.dat
20/04/2006 9:26:10 AM WindowManager:route MediaPortal.GUI.TV.GUIFullScreenTV:602->MediaPortal.Dialogs.GUIDialogNotify:2016
20/04/2006 9:26:10 AM window:MediaPortal.Dialogs.GUIDialogNotify init
20/04/2006 9:26:10 AM DVBGraph
endPMT() set demux: video pid:A64 audio pid:A65 AC3 pid:0 audio1 pid:A65 audio2 pid:0 audio3 pid:0 subtitle pid:FFFFFFFF teletext pid:0 pcr pid:A6420/04/2006 9:26:10 AM DVBDemuxer
RIME audio:A65 video:A64 teletext:0 pmt:1CC subtitle:0 program:241020/04/2006 9:26:10 AM DVBGraph
etHardwarePidFiltering to:0,1,10,11,12,D3,D2,A64,A65,1CC,20/04/2006 9:26:10 AM update dvbt channel
RIME20/04/2006 9:26:10 AM DVBGraph: grab epg for PRIME
20/04/2006 9:26:12 AM planescene: PresentSurface() frame:0 enabled:True allowed:False
20/04/2006 9:26:12 AM 1 VMR9Helper: repaint->playing 1
20/04/2006 9:26:13 AM 1 VMR9Helper: playing->repaint 1
20/04/2006 9:26:15 AM WindowManager:unroute to MediaPortal.Dialogs.GUIDialogNotify:2016->MediaPortal.GUI.TV.GUIFullScreenTV:602
20/04/2006 9:26:15 AM Notify Message
RIME, No signal detected!20/04/2006 9:26:15 AM DVBGraphBDA: VMR9 stopped quality:92 strength:0 locked:True fps:0
20/04/2006 9:26:20 AM DVBGraphBDA: VMR9 stopped quality:93 strength:0 locked:True fps:0
20/04/2006 9:26:21 AM fullscreentv:show gui
20/04/2006 9:26:21 AM Windowmanager:goto previous window
20/04/2006 9:26:21 AM deinit->OSD:Off
20/04/2006 9:26:21 AM window:MediaPortal.GUI.TV.GUIFullScreenTV deinit
20/04/2006 9:26:21 AM texturemanager:CleanupThumbs()
20/04/2006 9:26:21 AM window:MediaPortal.GUI.TV.GUITVGuide init
20/04/2006 9:26:21 AM turn tv on
20/04/2006 9:26:22 AM Windowmanager:goto previous window
20/04/2006 9:26:22 AM window:MediaPortal.GUI.TV.GUITVGuide deinit
20/04/2006 9:26:22 AM texturemanager:CleanupThumbs()
20/04/2006 9:26:22 AM window:MediaPortal.GUI.Music.GUIMusicFiles init
20/04/2006 9:26:23 AM Windowmanager:goto previous window
20/04/2006 9:26:23 AM window:MediaPortal.GUI.Music.GUIMusicFiles deinit
20/04/2006 9:26:23 AM texturemanager:CleanupThumbs()
20/04/2006 9:26:23 AM window:MediaPortal.GUI.TV.GUIFullScreenTV init
20/04/2006 9:26:23 AM start fullscreen channel
RIME20/04/2006 9:26:23 AM init->OSD:Off
20/04/2006 9:26:23 AM fullscreentv:show gui
20/04/2006 9:26:23 AM Windowmanager:goto previous window
20/04/2006 9:26:23 AM deinit->OSD:Off
20/04/2006 9:26:23 AM window:MediaPortal.GUI.TV.GUIFullScreenTV deinit
20/04/2006 9:26:23 AM texturemanager:CleanupThumbs()
20/04/2006 9:26:23 AM window:MediaPortal.GUI.TV.GUITVHome init
20/04/2006 9:26:23 AM tv home init
RIME20/04/2006 9:26:23 AM GUITVHome.ViewChannel(): View channel=PRIME ts:True
20/04/2006 9:26:24 AM Windowmanager:goto previous window
20/04/2006 9:26:24 AM window:MediaPortal.GUI.TV.GUITVHome deinit
20/04/2006 9:26:24 AM texturemanager:CleanupThumbs()
20/04/2006 9:26:24 AM window:MediaPortal.GUI.Home.HomeWindow init
20/04/2006 9:26:24 AM Windowmanager:goto previous window
20/04/2006 9:26:25 AM DVBGraphBDA: VMR9 stopped quality:93 strength:0 locked:True fps:0
20/04/2006 9:26:26 AM MediaPortal action exit()
20/04/2006 9:26:26 AM MediaPortal.FrameMove stopping()
20/04/2006 9:26:26 AM g_Player.Stop()
20/04/2006 9:26:26 AM g_Player.OnStopped()
20/04/2006 9:26:26 AM StreamBufferPlayer9:cleanup DShow graph False
20/04/2006 9:26:26 AM StreamBufferPlayer9: vmr9 disable
20/04/2006 9:26:26 AM StreamBufferPlayer9: vmr9 dispose
20/04/2006 9:26:26 AM 1 vmr9
ispose20/04/2006 9:26:26 AM VMR9: not active
20/04/2006 9:26:26 AM planescene: PresentImage()
20/04/2006 9:26:26 AM PlaneScene: PresentImage() dispose surfaces
20/04/2006 9:26:26 AM planescene: PresentImage()
20/04/2006 9:26:26 AM PlaneScene: PresentImage() dispose surfaces
20/04/2006 9:26:26 AM StreamBufferPlayer9:cleanup done
20/04/2006 9:26:26 AM StreamBufferPlayer9:grapbuilder=null
20/04/2006 9:26:26 AM GUIFont:texture disposing:0 debug
20/04/2006 9:26:26 AM GUIFont:texture disposing:1 font10
20/04/2006 9:26:26 AM GUIFont:texture disposing:2 font12
20/04/2006 9:26:26 AM GUIFont:texture disposing:3 font13
20/04/2006 9:26:26 AM GUIFont:texture disposing:4 font14
20/04/2006 9:26:26 AM GUIFont:texture disposing:5 font16
20/04/2006 9:26:26 AM GUIFont:texture disposing:6 font18
20/04/2006 9:26:26 AM GUIFont:texture disposing:7 dingbats
20/04/2006 9:26:26 AM GUIFont:texture disposing:8 font32
20/04/2006 9:26:26 AM GUIFont:texture disposing:9 font48
20/04/2006 9:26:26 AM GUIFont:texture disposing:10 font72
20/04/2006 9:26:26 AM GUIFont:texture disposing:11 fontSVT
20/04/2006 9:26:26 AM TexturePacker: disposing texture:199
20/04/2006 9:26:26 AM TexturePacker: disposing texture:198
20/04/2006 9:26:27 AM MediaPortal.OnExit()
20/04/2006 9:26:27 AM Recorder
top all tuners20/04/2006 9:26:27 AM Recorder
top card:UltraView HDTV DVB-T Plus20/04/2006 9:26:27 AM TVCapture.Stop() Card:1
20/04/2006 9:26:27 AM TVCapture.StopTimeShifting() Card:1
20/04/2006 9:26:27 AM DVBGraph: StopTimeShifting()
20/04/2006 9:26:27 AM TVCapture.DeleteGraph() Card:1
20/04/2006 9:26:27 AM DVBGraphBDA
eleteGraph(). ac3=false20/04/2006 9:26:27 AM DVBGraphBDA
eleteGraph()20/04/2006 9:26:27 AM DVBDemuxer: audio:0 video:0 teletext:0 pmt:0 subtitle:0 program:-1
20/04/2006 9:26:27 AM DVBGraphBDA:ReleaseComObject(m_StreamBufferSink):-1
20/04/2006 9:26:27 AM DVBGraphBDA:ReleaseComObject(m_StreamBufferConfig):-1
20/04/2006 9:26:27 AM Commandprocessor stopped
20/04/2006 9:26:27 AM PlugInManager.Stop()
20/04/2006 9:26:27 AM PluginManager: stopping MediaPortal.MyKeys.MyKeys
20/04/2006 9:26:27 AM Keyboard extensions disabled
20/04/2006 9:26:27 AM PluginManager: stopping ProcessPlugins.DiskSpace.RecordingManagement
20/04/2006 9:26:27 AM PluginManager: stopping ProcessPlugins.DiskSpace.EpisodeManagement
20/04/2006 9:26:27 AM PluginManager: stopping ProcessPlugins.DiskSpace.DiskManagement
20/04/2006 9:26:27 AM PluginManager: stopping ProcessPlugins.TVNotifies.NotifyManager
20/04/2006 9:26:27 AM fonts.Dispose()
20/04/2006 9:26:27 AM MediaPortal done
20/04/2006 9:26:27 AM dbs:close:musicdatabase5.db3
20/04/2006 9:26:27 AM dbs:close:FolderDatabase3.db3
20/04/2006 9:26:27 AM dbs:close:VideoDatabaseV5.db3
20/04/2006 9:26:27 AM dbs:close:TVDatabaseV21.db3
20/04/2006 9:26:27 AM dbs:close
rogramDatabaseV4.db3
I don’t know if this is important
I was just recording somthing and it lost the signal (in the end credits luckily)
When I watched the recording the image pauses when it lost signal but the audio continued untill i stoped the record
I was just recording somthing and it lost the signal (in the end credits luckily)
When I watched the recording the image pauses when it lost signal but the audio continued untill i stoped the record
1. Card Name: Dvico FusionHDTV Plus DVBT
2. Card Type: DVB-T
3. Country: Melbourne, AU
4. If you restart MP does the signal come back? (Y/N) Most of the time
5. If you change channel does the signal come back? (Y/N) Rarely
6. Do you require a reboot to be able to use TV? (Y/N) Rarely
7. Do you know of any tricks to re-enable TV without restarting / rebooting? No.
I haven't seen this on any other posts, but most of the time when the 'no signal detected' message comes up, a 'MediaPortal.exe has encountered an error' (standard XP crash message) briefly flashes on the screen before being covered again. When I exit MP (MP remains responsive), I can see the message.
HTH
Sam
p.s. btw, good work devs for moving the TV stuff into a seperate thread/appDomain - now when TV stuffs up the entire interface doesn't stuff up.
2. Card Type: DVB-T
3. Country: Melbourne, AU
4. If you restart MP does the signal come back? (Y/N) Most of the time
5. If you change channel does the signal come back? (Y/N) Rarely
6. Do you require a reboot to be able to use TV? (Y/N) Rarely
7. Do you know of any tricks to re-enable TV without restarting / rebooting? No.
I haven't seen this on any other posts, but most of the time when the 'no signal detected' message comes up, a 'MediaPortal.exe has encountered an error' (standard XP crash message) briefly flashes on the screen before being covered again. When I exit MP (MP remains responsive), I can see the message.
HTH
Sam
p.s. btw, good work devs for moving the TV stuff into a seperate thread/appDomain - now when TV stuffs up the entire interface doesn't stuff up.