Germany
Hi,
what primary version do you have? I do not have the options you are stating above:
Flip.
what primary version do you have? I do not have the options you are stating above:
Flip.
RC4: Hauppauge PVR-150 not working (1 Viewer)
- Thread starter HenriM
- Start date
- Thread starter
- #22
Another day, another try, but still not working 
I have Primary Version 3.9.22146 Perhaps this is the issue and gives other behaviour of the card. Which version are you using Wortelsoft?
I am also suspecting the Wizards to be incorrect. In the past I always configured everything manually. This time I followed the wizards...
I already noticed that the channellist is not correct when I check the XML file. I'll try a fresh install (after un-install and deleting directory of course) ASAP, but at this moment I am a little short on time. Further I will then again do the configuring completely manually without using any wizard.
As soon as I have results I will post them here.
I have Primary Version 3.9.22146 Perhaps this is the issue and gives other behaviour of the card. Which version are you using Wortelsoft?
I am also suspecting the Wizards to be incorrect. In the past I always configured everything manually. This time I followed the wizards...
I already noticed that the channellist is not correct when I check the XML file. I'll try a fresh install (after un-install and deleting directory of course) ASAP, but at this moment I am a little short on time. Further I will then again do the configuring completely manually without using any wizard.
As soon as I have results I will post them here.
Area: Media Portal Program
MP Version: V0.2 RC4 svn-04-29-2006--01-04
Skin: BlueTwo
Windows Version: Windows XP SP2
CPU Type: Intel P4 1.7
Memory: 512
Motherboard Chipset: Intel (ASUS P4T)
Video Card: NVidia 5600 XT
Video Card Driver: current
Video Card Resolution: DVD
Video Render Type: VMR9
Video Codec Type & Version: NVIDIA Power Video
Audio Codec Type & Version: NVIDIA Power Audio
TV Card: Hauppauge WinTV PVR PCI II (26xx) (PVR-150)
TV Card Type: Analog
TV Card Driver: 2.0.43.24103
Hi, I have the same Problem... My last version of MP was 2RC1 - Without any problem in TV-Mode. But since I'd installed RC4, even the channel-scan preview (in setup) is black - the system finds all channels, but don't show a picture... TV2000 and any other app are working fine (using TVCap150 for recording - no problems at all!)
So it seems a real problem in MP RC4...
Greetings from switzerland - Mike
MP Version: V0.2 RC4 svn-04-29-2006--01-04
Skin: BlueTwo
Windows Version: Windows XP SP2
CPU Type: Intel P4 1.7
Memory: 512
Motherboard Chipset: Intel (ASUS P4T)
Video Card: NVidia 5600 XT
Video Card Driver: current
Video Card Resolution: DVD
Video Render Type: VMR9
Video Codec Type & Version: NVIDIA Power Video
Audio Codec Type & Version: NVIDIA Power Audio
TV Card: Hauppauge WinTV PVR PCI II (26xx) (PVR-150)
TV Card Type: Analog
TV Card Driver: 2.0.43.24103
Hi, I have the same Problem... My last version of MP was 2RC1 - Without any problem in TV-Mode. But since I'd installed RC4, even the channel-scan preview (in setup) is black - the system finds all channels, but don't show a picture... TV2000 and any other app are working fine (using TVCap150 for recording - no problems at all!)
So it seems a real problem in MP RC4...
Greetings from switzerland - Mike
I din't even now the program existed on my system
It's version 3.9.22146 and looks different then the pic of flipger
What do I need this program for? Is it to force the card in dx9 mode?
It's version 3.9.22146 and looks different then the pic of flipger
What do I need this program for? Is it to force the card in dx9 mode?
- Thread starter
- #25
I have uninstalled MP, deleted the whole directory and installed all again together with latest SVN. Then I configured everything manually and without any filled TVGuide in order to rule out possible problems.
Still not working Same behaviour as before...
Wortelsoft I have exact the same version of Primary.exe as you have. Which settings do you have set?
Still not working
Same behaviour as before... Wortelsoft I have exact the same version of Primary.exe as you have. Which settings do you have set?
allow vmr
vmr 9 only
use dxva
use hw motion
One thing I thought about is that there has been some work done not so long ago on the pvr150, something with incorrect recognition. maybe you should try if a cvs /svn from before those changes works.
vmr 9 only
use dxva
use hw motion
One thing I thought about is that there has been some work done not so long ago on the pvr150, something with incorrect recognition. maybe you should try if a cvs /svn from before those changes works.
- Thread starter
- #27
Wortelsoft thanks again for the quick reply. I have checked the recent history of MP and saw next interesting changes in the past:
MediaPortal TVEngine
On 08/04/2006 [14:21:16] dman_LFC added the following change: New PVR2000 variant
MediaPortal TVEngine
On 19/03/2006 [21:53:31] dman_LFC added the following change: - OEM Hauppauge PVR-250 support
MediaPortal TVEngine
On 15/03/2006 [22:50:06] dman_LFC added the following change: - Hauppauge PVR USB2 MCE support
MediaPortal Fixed
On 02/01/2006 [19:52:29] dman_LFC added the following change: MultiTuner Bug with different PVR cards
As I already told you I have the PVR150 correctly working with RC2. The problems only started after this RC2. I've tried RC3 and RC4 and both had the same issue. What I do find interesting in the history is the change on 15/03/2006 by dman_LFC. I find especially this entry interesting because I use an external USB (Creative USB Soundblaster Audigy 2 NX) soundcard. I'll try to disable this one and use the onboard audio asap and let you all know the results...
MediaPortal TVEngine
On 08/04/2006 [14:21:16] dman_LFC added the following change: New PVR2000 variant
MediaPortal TVEngine
On 19/03/2006 [21:53:31] dman_LFC added the following change: - OEM Hauppauge PVR-250 support
MediaPortal TVEngine
On 15/03/2006 [22:50:06] dman_LFC added the following change: - Hauppauge PVR USB2 MCE support
MediaPortal Fixed
On 02/01/2006 [19:52:29] dman_LFC added the following change: MultiTuner Bug with different PVR cards
As I already told you I have the PVR150 correctly working with RC2. The problems only started after this RC2. I've tried RC3 and RC4 and both had the same issue. What I do find interesting in the history is the change on 15/03/2006 by dman_LFC. I find especially this entry interesting because I use an external USB (Creative USB Soundblaster Audigy 2 NX) soundcard. I'll try to disable this one and use the onboard audio asap and let you all know the results...
- Thread starter
- #28
I have removed the USB soundcard and use only the onboard AC97 sound. Still no go with MyTV.
Then I changed the Audio Codec of MyTV into ffdshow Audio Decoder and unchecked the [ ] Select channel by index (non-US) and at least something is happening now. I get an error message-box saying Unable to connect graph:
Error.log
1-5-2006 21:22:41 Exceptionystem.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
at DirectShowLib.IMPEG2StreamIdMap.MapStreamId(Int32 ulStreamId, MPEG2Program MediaSampleContent, Int32 ulSubstreamFilterValue, Int32 iDataOffset)
at DShowNET.Helper.MPEG2Demux.CreateMappings()
at MediaPortal.TV.Recording.SinkGraphEx.CreateGraph(Int32 Quality)
1-5-2006 21:22:41 Exception :Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
1-5-2006 21:22:41 site :Int32 MapStreamId(Int32, DirectShowLib.MPEG2Program, Int32, Int32)
1-5-2006 21:22:41 sourceirectShowLib
1-5-2006 21:22:41 stacktrace: at DirectShowLib.IMPEG2StreamIdMap.MapStreamId(Int32 ulStreamId, MPEG2Program MediaSampleContent, Int32 ulSubstreamFilterValue, Int32 iDataOffset)
at DShowNET.Helper.MPEG2Demux.CreateMappings()
at MediaPortal.TV.Recording.SinkGraphEx.CreateGraph(Int32 Quality)
1-5-2006 21:22:41 Command:MediaPortal.TV.Recording.ViewTvCommand failed reason:TV starten niet gelukt
Unable to create graph time:2812,5 msec
1-5-2006 21:22:42 render exceptionystem.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
at Microsoft.Win32.Win32Native.CoTaskMemAlloc(Int32 cb)
at System.Runtime.InteropServices.Marshal.StringToCoTaskMemUni(String s)
at MediaPortal.GUI.Library.GUIFont.DrawText(Single xpos, Single ypos, Color color, String text, RenderFlags flags, Int32 maxWidth)
at MediaPortal.GUI.Library.GUIFont.DrawText(Single xpos, Single ypos, Int64 color, String label, Alignment alignment, Int32 maxWidth)
at MediaPortal.GUI.Library.GUILabelControl.Render(Single timePassed)
at MediaPortal.GUI.Library.GUIWindow.Render(Single timePassed)
Recorder.log
1-5-2006 21:22:35 Recorder: card:1 video device:Hauppauge WinTV PVR PCI II Capture TV:True record:True priority:1
1-5-2006 21:22:38 Recorder:enable dx9 exclusive mode
1-5-2006 21:22:38 add cmd:MediaPortal.TV.Recording.ViewTvCommand #1
1-5-2006 21:22:38 Command: view tv channel:Nederland 1
1-5-2006 21:22:38 Recorder: find free card
1-5-2006 21:22:38 Commandtop all card except card:0
1-5-2006 21:22:40 Recorder: use free card Hauppauge PVR150 prio:1 name:Hauppauge PVR150
1-5-2006 21:22:40 Recorder: start watching on card:Hauppauge PVR150 channel:Nederland 1
1-5-2006 21:22:41 Command:MediaPortal.TV.Recording.ViewTvCommand failed reason:TV starten niet gelukt
Unable to create graph time:2812,5 msec
1-5-2006 21:22:41 Recorder: Card:Hauppauge PVR150 idle
1-5-2006 21:22:49 Recordertop all tuners
1-5-2006 21:22:49 Recordertop card:Hauppauge PVR150
1-5-2006 21:22:49 Commandprocessor stopped
Mediaportal.log
1-5-2006 21:22:28 MediaPortal is starting up
1-5-2006 21:22:28 Assembly creation time: 30-4-2006 23:02:34 (UTC)
1-5-2006 21:22:28 Set current directory to :C:\Program Files\Team MediaPortal\MediaPortal
1-5-2006 21:22:28 verify that directx 9 is installed
1-5-2006 21:22:28 verify that windows mediaplayer 9 or 10 is installed
1-5-2006 21:22:28 Windows media player version:10,0,0,3646 installed
1-5-2006 21:22:28 Application Version: 0.2.0.0 RC4
1-5-2006 21:22:28 Check if mediaportal is already started
1-5-2006 21:22:28 delete old log\capture.log file...
1-5-2006 21:22:28 SVN Build: 05-01-2006 / 1:00
1-5-2006 21:22:28 Check skin version
1-5-2006 21:22:28 Load key mapping from keymap.xml
1-5-2006 21:22:28 Init playlist player
1-5-2006 21:22:28 creating the WINLIRC device
1-5-2006 21:22:28 Initialising WinLirc...
1-5-2006 21:22:28 WinLirc window not found, starting WinLirc
1-5-2006 21:22:28 Winlirc process not found
1-5-2006 21:22:28 done creating the WINLIRC device
1-5-2006 21:22:28 Init players
1-5-2006 21:22:28 initializing DirectX
1-5-2006 21:22:29 start fullscreen
1-5-2006 21:22:29 ClientSize: 800x600 screen:800x600
1-5-2006 21:22:29 MAP: using default mappings for DirectInput
1-5-2006 21:22:29 texturemanager:dispose()
1-5-2006 21:22:29 TexturePackerispose()
1-5-2006 21:22:29 fonts.Dispose()
1-5-2006 21:22:29 Load key mapping from keymap.xml
1-5-2006 21:22:29 load localized strings from:language\Dutch\strings.xml
1-5-2006 21:22:29 language file:language\Dutch\strings.xml is missing entry for id:765 text:Not enough free diskspace
1-5-2006 21:22:29 language file:language\Dutch\strings.xml is missing entry for id:10104 text:Mini EPG
1-5-2006 21:22:29 fonts.Dispose()
1-5-2006 21:22:29 Load fonts from skin\BlueTwo\fonts.xml
1-5-2006 21:22:29 fonts.InitializeDeviceObjects()
1-5-2006 21:22:29 Loaded font:debug height:12 texture:256x256 chars:[32-255] miplevels:1
1-5-2006 21:22:29 Loaded font:font10 height:10 texture:256x256 chars:[32-256] miplevels:1
1-5-2006 21:22:29 Loaded font:font12 height:12 texture:256x256 chars:[32-256] miplevels:1
1-5-2006 21:22:29 Loaded font:font13 height:13 texture:512x512 chars:[32-256] miplevels:1
1-5-2006 21:22:29 Loaded font:font14 height:14 texture:512x512 chars:[32-256] miplevels:1
1-5-2006 21:22:30 Loaded font:font16 height:16 texture:512x512 chars:[32-256] miplevels:1
1-5-2006 21:22:30 Loaded font:font18 height:18 texture:512x512 chars:[32-256] miplevels:1
1-5-2006 21:22:30 Loaded font:dingbats height:25 texture:512x512 chars:[32-256] miplevels:1
1-5-2006 21:22:30 Loaded font:font32 height:33 texture:256x256 chars:[48-59] miplevels:1
1-5-2006 21:22:30 Loaded font:font48 height:50 texture:256x256 chars:[48-59] miplevels:1
1-5-2006 21:22:30 Loaded font:font72 height:75 texture:512x512 chars:[48-59] miplevels:1
1-5-2006 21:22:30 Loaded font:fontSVT height:13 texture:512x512 chars:[32-256] miplevels:1
1-5-2006 21:22:30 Load skin BlueTwo
1-5-2006 21:22:30 LoadWindowPlugins()
1-5-2006 21:22:30 Load plugins fromlugins\windows\Dialogs.DLL
1-5-2006 21:22:30 Load plugins fromlugins\windows\WindowPlugins.dll
1-5-2006 21:22:31 Loading references from skin\BlueTwo\references.xml
1-5-2006 21:22:31 original skin size:720x576
1-5-2006 21:22:31 using sqlite 3.2.8
1-5-2006 21:22:32 StartImportXML: Initialize
1-5-2006 21:22:32 StartImportXML: Initialize
1-5-2006 21:22:32 StartImportXML: Initialize
1-5-2006 21:22:32 opening tvdatabase
1-5-2006 21:22:32 tvdatabase opened
1-5-2006 21:22:32 xml:skin\BlueTwo\tvOSD.xml image id:350 width:0 height:0 gfx:-
1-5-2006 21:22:32 xml:skin\BlueTwo\videoOSD.xml image id:350 width:0 height:0 gfx:-
1-5-2006 21:22:33 Load plugins fromlugins\windows\XihSolutions.DotMSN.DLL
1-5-2006 21:22:33 WindowManager.Load
1-5-2006 21:22:33 load calib800x600.xml
1-5-2006 21:22:33 WindowManager.Preinitialize
1-5-2006 21:22:33 TexturePacker: Loaded skin\BlueTwo\packedgfx21.png texture:2048x2048 miplevels:1
1-5-2006 21:22:33 TexturePacker: fontengine add texure:199
1-5-2006 21:22:33 TexturePacker: Loaded skin\BlueTwo\packedgfx20.png texture:2048x2048 miplevels:1
1-5-2006 21:22:33 TexturePacker: fontengine add texure:198
1-5-2006 21:22:33 WindowManager.ActivateWindow
1-5-2006 21:22:33 xml:skin\BlueTwo\home.xml image id:1000 width:0 height:0 gfx:-
1-5-2006 21:22:34 window:MediaPortal.GUI.Home.HomeWindow init
1-5-2006 21:22:34 skin initialized
1-5-2006 21:22:34 DX9 size: 800x600
1-5-2006 21:22:34 video ram left:178176 KByte
1-5-2006 21:22:34 MAP: using default mappings for Hauppauge HCW
1-5-2006 21:22:34 Process: MediaPortal
1-5-2006 21:22:35 running...
1-5-2006 21:22:35 HCWHelper: Starting up
1-5-2006 21:22:35 MediaPortal.OnStartup()
1-5-2006 21:22:35 Recorder: card:1 video device:Hauppauge WinTV PVR PCI II Capture TV:True record:True priority:1
1-5-2006 21:22:35 PlugInManager.Load()
1-5-2006 21:22:35 Load plugins fromlugins\process\ProcessPlugins.dll
1-5-2006 21:22:35 PlugInManager.Start()
1-5-2006 21:22:35 PowerScheduler: version 0.3
1-5-2006 21:22:35 PowerScheduler: Settings loaded - wakeup 1, shutdown 3, mode Suspend
1-5-2006 21:22:35 PowerScheduler: Shutdown timer activated, automatic shutdown in 3 minutes
1-5-2006 21:22:38 window:MediaPortal.GUI.Home.HomeWindow deinit
1-5-2006 21:22:38 texturemanager:CleanupThumbs()
1-5-2006 21:22:38 Recorder:enable dx9 exclusive mode
1-5-2006 21:22:38 goto fullscreen:True
1-5-2006 21:22:38 appwitch to fullscreen mode False
1-5-2006 21:22:38 appwitched to fullscreen mode
1-5-2006 21:22:38 window:MediaPortal.GUI.TV.GUITVHome init
1-5-2006 21:22:38 tv home init:Nederland 1
1-5-2006 21:22:38 GUITVHome.ViewChannel(): View channel=Nederland 1 ts:False
1-5-2006 21:22:38 add cmd:MediaPortal.TV.Recording.ViewTvCommand #1
1-5-2006 21:22:38 Command: view tv channel:Nederland 1
1-5-2006 21:22:38 Recorder: find free card
1-5-2006 21:22:38 Commandtop all card except card:0
1-5-2006 21:22:38 keyYSTEM\CurrentControlSet\Enum\PCI\ven_4444&dev_0016&subsys_80030070&rev_01\4&1f7dbc9f&0&38f0
1-5-2006 21:22:38 LoadDefs for device at PCI bus 2, device 7
1-5-2006 21:22:40 video device monikerdevicenp:\\?\pci#ven_4444&dev_0016&subsys_80030070&rev_01#4&1f7dbc9f&0&38f0#{65e8773d-8f56-11d0-a3b9-00a0c9223196}\{9b365890-165f-11d0-a195-0020afd156e4}
1-5-2006 21:22:40 captureDeviceDeviceNamedevicenp:\\?\pci#ven_4444&dev_0016&subsys_80030070&rev_01#4&1f7dbc9f&0&38f0
1-5-2006 21:22:40 FindInstancedevicenp:\\?\pci#ven_4444&dev_0016&subsys_80030070&rev_01#4&1f7dbc9f&0&38f0
1-5-2006 21:22:40 keyYSTEM\CurrentControlSet\Enum\pci\ven_4444&dev_0016&subsys_80030070&rev_01\4&1f7dbc9f&0&38f0
1-5-2006 21:22:40 serviceName:hcwPP2
1-5-2006 21:22:40 keyYSTEM\CurrentControlSet\Services\hcwPP2\Enum
1-5-2006 21:22:40 Number of cards:1
1-5-2006 21:22:40 card#0=PCI#VEN_4444&DEV_0016&SUBSYS_80030070&REV_01#4&1f7dbc9f&0&38F0
1-5-2006 21:22:40 using card:#0
1-5-2006 21:22:40 Using card#0
1-5-2006 21:22:40 filter tvtuner='Hauppauge WinTV PVR PCI II TvTuner' check:True
1-5-2006 21:22:40 filter tvaudio='Hauppauge WinTV PVR PCI II TvAudio' check:True
1-5-2006 21:22:40 filter crossbar='Hauppauge WinTV PVR PCI II Crossbar' check:True
1-5-2006 21:22:40 filter capture='Hauppauge WinTV PVR PCI II Capture' check:True
1-5-2006 21:22:40 filter encoder='Hauppauge WinTV PVR PCI II Encoder' check:True
1-5-2006 21:22:40 Recorder: use free card Hauppauge PVR150 prio:1 name:Hauppauge PVR150
1-5-2006 21:22:40 Recorder: start watching on card:Hauppauge PVR150 channel:Nederland 1
1-5-2006 21:22:41 TVCapture.CreateGraph() Card:1
1-5-2006 21:22:41 7 vmr9:ctor()
1-5-2006 21:22:41 7 vmr9:ctor() done:True
1-5-2006 21:22:41 SinkGraphEx:CreateGraph() IN
1-5-2006 21:22:41 SinkGraphEx: Create new filter graph (IGraphBuilder)
1-5-2006 21:22:41 SinkGraphEx: Get the Capture Graph Builder (ICaptureGraphBuilder2)
1-5-2006 21:22:41 SinkGraphEx: Link the CaptureGraphBuilder to the filter graph (SetFiltergraph)
1-5-2006 21:22:41 SinkGraphEx: Add graph to ROT table
1-5-2006 21:22:41 SinkGraphEx: Adding configured filters...
1-5-2006 21:22:41 SinkGraphEx: adding filter <Hauppauge> with moniker <device>
1-5-2006 21:22:41 SinkGraphEx: Added filter <Hauppauge> with moniker <device>
1-5-2006 21:22:41 SinkGraphEx: adding filter <Hauppauge> with moniker <device>
1-5-2006 21:22:41 SinkGraphEx: Added filter <Hauppauge> with moniker <device>
1-5-2006 21:22:41 SinkGraphEx: adding filter <Hauppauge> with moniker <device>
1-5-2006 21:22:41 SinkGraphEx: Added filter <Hauppauge> with moniker <device>
1-5-2006 21:22:41 SinkGraphEx: adding filter <Hauppauge> with moniker <device>
1-5-2006 21:22:41 SinkGraphEx: Added filter <Hauppauge> with moniker <device>
1-5-2006 21:22:41 SinkGraphEx: adding filter <Hauppauge> with moniker <device>
1-5-2006 21:22:41 SinkGraphEx: Added filter <Hauppauge> with moniker <device>
1-5-2006 21:22:41 SinkGraphEx: Adding configured filters...DONE
1-5-2006 21:22:41 SinkGraphEx: Adding configured pin connections...
1-5-2006 21:22:41 SinkGraphEx: Connecting <Hauppauge>:0 with <Hauppauge>:%tvtuner%
1-5-2006 21:22:41 SinkGraphEx: Found sourcePin: <0> <System>
1-5-2006 21:22:41 SinkGraphEx: Pins connected...
1-5-2006 21:22:41 SinkGraphEx: Connecting <Hauppauge>:1 with <Hauppauge>:0
1-5-2006 21:22:41 SinkGraphEx: Found sourcePin: <1> <System>
1-5-2006 21:22:41 SinkGraphEx: Found pin: <0> <System>
1-5-2006 21:22:41 SinkGraphEx: Pins connected...
1-5-2006 21:22:41 SinkGraphEx: Connecting <Hauppauge>:0 with <Hauppauge>:%audiotuner%
1-5-2006 21:22:41 SinkGraphEx: Found sourcePin: <0> <System>
1-5-2006 21:22:41 SinkGraphEx: Pins connected...
1-5-2006 21:22:41 SinkGraphEx: Connecting <Hauppauge>:0 with <Hauppauge>:0
1-5-2006 21:22:41 SinkGraphEx: Found sourcePin: <0> <System>
1-5-2006 21:22:41 SinkGraphEx: Found pin: <0> <System>
1-5-2006 21:22:41 SinkGraphEx: Pins connected...
1-5-2006 21:22:41 SinkGraphEx: Connecting <Hauppauge>:1 with <Hauppauge>:1
1-5-2006 21:22:41 SinkGraphEx: Found sourcePin: <1> <System>
1-5-2006 21:22:41 SinkGraphEx: Found pin: <1> <System>
1-5-2006 21:22:41 SinkGraphEx: Pins connected...
1-5-2006 21:22:41 SinkGraphEx: Connecting <Hauppauge>:3 with <Hauppauge>:0
1-5-2006 21:22:41 SinkGraphEx: Found sourcePin: <3> <System>
1-5-2006 21:22:41 SinkGraphEx: Found pin: <0> <System>
1-5-2006 21:22:41 SinkGraphEx: Pins connected...
1-5-2006 21:22:41 SinkGraphEx: Adding configured pin connections...DONE
1-5-2006 21:22:41 VideoCaptureDevice: found output pin
1-5-2006 21:22:41 VideoCaptureDevice:get Video stream control interface (IAMStreamConfig)
1-5-2006 21:22:41 VideoCaptureDevice:got IAMStreamConfig for Capture
1-5-2006 21:22:41 SWGraph:capture FrameRate set to 25
1-5-2006 21:22:41 VideoCaptureDevice: capture FrameRate done :25
1-5-2006 21:22:41 VideoCaptureDevice:change capture Framesize :720x576 ->720x576
1-5-2006 21:22:41 SinkGraphEx: Capturing:720x576
1-5-2006 21:22:41 mpeg2:add new MPEG2 Demultiplexer to graph
1-5-2006 21:22:41 mpeg2:create video out pin on MPEG2 demuxer
1-5-2006 21:22:41 mpeg2:create mpeg audio out pin on MPEG2 demuxer
1-5-2006 21:22:41 mpeg2:create lpcm audio out pin on MPEG2 demuxer
1-5-2006 21:22:41 mpeg2:find MPEG2 demuxer input pin
1-5-2006 21:22:41 mpeg2:found MPEG2 demuxer input pin
1-5-2006 21:22:41 mpeg2:MPEG2 demuxer map MPG stream 0xe0->video output pin
1-5-2006 21:22:41 Exceptionystem.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
at DirectShowLib.IMPEG2StreamIdMap.MapStreamId(Int32 ulStreamId, MPEG2Program MediaSampleContent, Int32 ulSubstreamFilterValue, Int32 iDataOffset)
at DShowNET.Helper.MPEG2Demux.CreateMappings()
at MediaPortal.TV.Recording.SinkGraphEx.CreateGraph(Int32 Quality)
1-5-2006 21:22:41 Exception :Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
1-5-2006 21:22:41 site :Int32 MapStreamId(Int32, DirectShowLib.MPEG2Program, Int32, Int32)
1-5-2006 21:22:41 sourceirectShowLib
1-5-2006 21:22:41 stacktrace: at DirectShowLib.IMPEG2StreamIdMap.MapStreamId(Int32 ulStreamId, MPEG2Program MediaSampleContent, Int32 ulSubstreamFilterValue, Int32 iDataOffset)
at DShowNET.Helper.MPEG2Demux.CreateMappings()
at MediaPortal.TV.Recording.SinkGraphEx.CreateGraph(Int32 Quality)
1-5-2006 21:22:41 Command:MediaPortal.TV.Recording.ViewTvCommand failed reason:TV starten niet gelukt
Unable to create graph time:2812,5 msec
1-5-2006 21:22:41 Recorder: Card:Hauppauge PVR150 idle
1-5-2006 21:22:41 WindowManager:route MediaPortal.GUI.TV.GUITVHome:1->MediaPortal.Dialogs.GUIDialogOK:2002
1-5-2006 21:22:41 window:MediaPortal.Dialogs.GUIDialogOK init
1-5-2006 21:22:42 render exceptionystem.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
at Microsoft.Win32.Win32Native.CoTaskMemAlloc(Int32 cb)
at System.Runtime.InteropServices.Marshal.StringToCoTaskMemUni(String s)
at MediaPortal.GUI.Library.GUIFont.DrawText(Single xpos, Single ypos, Color color, String text, RenderFlags flags, Int32 maxWidth)
at MediaPortal.GUI.Library.GUIFont.DrawText(Single xpos, Single ypos, Int64 color, String label, Alignment alignment, Int32 maxWidth)
at MediaPortal.GUI.Library.GUILabelControl.Render(Single timePassed)
at MediaPortal.GUI.Library.GUIWindow.Render(Single timePassed)
1-5-2006 21:22:46 PowerScheduler: next scheduled event 1-1-2100 1:00:00 triggered by: Power Scheduler
1-5-2006 21:22:46 PowerScheduler: Set wakeup timer at 1-1-2100 0:59:00
1-5-2006 21:22:46 PowerScheduler: Shutdown timer deactivated
1-5-2006 21:22:46 WindowManager:unroute to MediaPortal.Dialogs.GUIDialogOK:2002->MediaPortal.GUI.TV.GUITVHome:1
1-5-2006 21:22:48 GUIFont:texture disposing:0 debug
1-5-2006 21:22:48 GUIFont:texture disposing:1 font10
1-5-2006 21:22:48 GUIFont:texture disposing:2 font12
1-5-2006 21:22:48 GUIFont:texture disposing:3 font13
1-5-2006 21:22:48 GUIFont:texture disposing:4 font14
1-5-2006 21:22:48 GUIFont:texture disposing:5 font16
1-5-2006 21:22:48 GUIFont:texture disposing:6 font18
1-5-2006 21:22:48 GUIFont:texture disposing:7 dingbats
1-5-2006 21:22:48 GUIFont:texture disposing:8 font32
1-5-2006 21:22:48 GUIFont:texture disposing:9 font48
1-5-2006 21:22:48 GUIFont:texture disposing:10 font72
1-5-2006 21:22:48 GUIFont:texture disposing:11 fontSVT
1-5-2006 21:22:48 TexturePacker: disposing texture:199
1-5-2006 21:22:48 TexturePacker: disposing texture:198
1-5-2006 21:22:48 MediaPortal.OnExit()
1-5-2006 21:22:49 Recordertop all tuners
1-5-2006 21:22:49 Recordertop card:Hauppauge PVR150
1-5-2006 21:22:49 TVCapture.Stop() Card:1
1-5-2006 21:22:49 TVCapture.DeleteGraph() Card:1
1-5-2006 21:22:49 Commandprocessor stopped
1-5-2006 21:22:49 HCWHelper: Shutting down
1-5-2006 21:22:49 PlugInManager.Stop()
1-5-2006 21:22:49 PluginManager: stopping ProcessPlugins.DiskSpace.DiskManagement
1-5-2006 21:22:49 PluginManager: stopping ProcessPlugins.DiskSpace.EpisodeManagement
1-5-2006 21:22:49 PluginManager: stopping ProcessPlugins.DiskSpace.RecordingManagement
1-5-2006 21:22:49 PluginManager: stopping MediaPortal.PowerScheduler.NVPPowerScheduler
1-5-2006 21:22:54 PowerScheduler: Stop()
1-5-2006 21:22:54 PluginManager: stopping ProcessPlugins.TVNotifies.NotifyManager
1-5-2006 21:22:54 fonts.Dispose()
1-5-2006 21:22:55 MediaPortal done
1-5-2006 21:22:55 mpeg2: close interfaces
1-5-2006 21:22:55 dbs:closerogramDatabaseV4.db3
1-5-2006 21:22:55 dbs:close:TVDatabaseV21.db3
So you get the logging 'Exceptionystem.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.' So this seems like a software issue to me. Perhaps I now really should start debugging this whole thing. However upto now my skills are 'only' assembly and C/C++. Perhaps this is a good starting point for improving my C# skills....
Then I changed the Audio Codec of MyTV into ffdshow Audio Decoder and unchecked the [ ] Select channel by index (non-US) and at least something is happening now. I get an error message-box saying Unable to connect graph:
Error.log
1-5-2006 21:22:41 Exception
ystem.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.at DirectShowLib.IMPEG2StreamIdMap.MapStreamId(Int32 ulStreamId, MPEG2Program MediaSampleContent, Int32 ulSubstreamFilterValue, Int32 iDataOffset)
at DShowNET.Helper.MPEG2Demux.CreateMappings()
at MediaPortal.TV.Recording.SinkGraphEx.CreateGraph(Int32 Quality)
1-5-2006 21:22:41 Exception :Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
1-5-2006 21:22:41 site :Int32 MapStreamId(Int32, DirectShowLib.MPEG2Program, Int32, Int32)
1-5-2006 21:22:41 source
irectShowLib1-5-2006 21:22:41 stacktrace: at DirectShowLib.IMPEG2StreamIdMap.MapStreamId(Int32 ulStreamId, MPEG2Program MediaSampleContent, Int32 ulSubstreamFilterValue, Int32 iDataOffset)
at DShowNET.Helper.MPEG2Demux.CreateMappings()
at MediaPortal.TV.Recording.SinkGraphEx.CreateGraph(Int32 Quality)
1-5-2006 21:22:41 Command:MediaPortal.TV.Recording.ViewTvCommand failed reason:TV starten niet gelukt
Unable to create graph time:2812,5 msec
1-5-2006 21:22:42 render exception
ystem.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.at Microsoft.Win32.Win32Native.CoTaskMemAlloc(Int32 cb)
at System.Runtime.InteropServices.Marshal.StringToCoTaskMemUni(String s)
at MediaPortal.GUI.Library.GUIFont.DrawText(Single xpos, Single ypos, Color color, String text, RenderFlags flags, Int32 maxWidth)
at MediaPortal.GUI.Library.GUIFont.DrawText(Single xpos, Single ypos, Int64 color, String label, Alignment alignment, Int32 maxWidth)
at MediaPortal.GUI.Library.GUILabelControl.Render(Single timePassed)
at MediaPortal.GUI.Library.GUIWindow.Render(Single timePassed)
Recorder.log
1-5-2006 21:22:35 Recorder: card:1 video device:Hauppauge WinTV PVR PCI II Capture TV:True record:True priority:1
1-5-2006 21:22:38 Recorder:enable dx9 exclusive mode
1-5-2006 21:22:38 add cmd:MediaPortal.TV.Recording.ViewTvCommand #1
1-5-2006 21:22:38 Command: view tv channel:Nederland 1
1-5-2006 21:22:38 Recorder: find free card
1-5-2006 21:22:38 Command
top all card except card:01-5-2006 21:22:40 Recorder: use free card Hauppauge PVR150 prio:1 name:Hauppauge PVR150
1-5-2006 21:22:40 Recorder: start watching on card:Hauppauge PVR150 channel:Nederland 1
1-5-2006 21:22:41 Command:MediaPortal.TV.Recording.ViewTvCommand failed reason:TV starten niet gelukt
Unable to create graph time:2812,5 msec
1-5-2006 21:22:41 Recorder: Card:Hauppauge PVR150 idle
1-5-2006 21:22:49 Recorder
top all tuners1-5-2006 21:22:49 Recorder
top card:Hauppauge PVR1501-5-2006 21:22:49 Commandprocessor stopped
Mediaportal.log
1-5-2006 21:22:28 MediaPortal is starting up
1-5-2006 21:22:28 Assembly creation time: 30-4-2006 23:02:34 (UTC)
1-5-2006 21:22:28 Set current directory to :C:\Program Files\Team MediaPortal\MediaPortal
1-5-2006 21:22:28 verify that directx 9 is installed
1-5-2006 21:22:28 verify that windows mediaplayer 9 or 10 is installed
1-5-2006 21:22:28 Windows media player version:10,0,0,3646 installed
1-5-2006 21:22:28 Application Version: 0.2.0.0 RC4
1-5-2006 21:22:28 Check if mediaportal is already started
1-5-2006 21:22:28 delete old log\capture.log file...
1-5-2006 21:22:28 SVN Build: 05-01-2006 / 1:00
1-5-2006 21:22:28 Check skin version
1-5-2006 21:22:28 Load key mapping from keymap.xml
1-5-2006 21:22:28 Init playlist player
1-5-2006 21:22:28 creating the WINLIRC device
1-5-2006 21:22:28 Initialising WinLirc...
1-5-2006 21:22:28 WinLirc window not found, starting WinLirc
1-5-2006 21:22:28 Winlirc process not found
1-5-2006 21:22:28 done creating the WINLIRC device
1-5-2006 21:22:28 Init players
1-5-2006 21:22:28 initializing DirectX
1-5-2006 21:22:29 start fullscreen
1-5-2006 21:22:29 ClientSize: 800x600 screen:800x600
1-5-2006 21:22:29 MAP: using default mappings for DirectInput
1-5-2006 21:22:29 texturemanager:dispose()
1-5-2006 21:22:29 TexturePacker
ispose()1-5-2006 21:22:29 fonts.Dispose()
1-5-2006 21:22:29 Load key mapping from keymap.xml
1-5-2006 21:22:29 load localized strings from:language\Dutch\strings.xml
1-5-2006 21:22:29 language file:language\Dutch\strings.xml is missing entry for id:765 text:Not enough free diskspace
1-5-2006 21:22:29 language file:language\Dutch\strings.xml is missing entry for id:10104 text:Mini EPG
1-5-2006 21:22:29 fonts.Dispose()
1-5-2006 21:22:29 Load fonts from skin\BlueTwo\fonts.xml
1-5-2006 21:22:29 fonts.InitializeDeviceObjects()
1-5-2006 21:22:29 Loaded font:debug height:12 texture:256x256 chars:[32-255] miplevels:1
1-5-2006 21:22:29 Loaded font:font10 height:10 texture:256x256 chars:[32-256] miplevels:1
1-5-2006 21:22:29 Loaded font:font12 height:12 texture:256x256 chars:[32-256] miplevels:1
1-5-2006 21:22:29 Loaded font:font13 height:13 texture:512x512 chars:[32-256] miplevels:1
1-5-2006 21:22:29 Loaded font:font14 height:14 texture:512x512 chars:[32-256] miplevels:1
1-5-2006 21:22:30 Loaded font:font16 height:16 texture:512x512 chars:[32-256] miplevels:1
1-5-2006 21:22:30 Loaded font:font18 height:18 texture:512x512 chars:[32-256] miplevels:1
1-5-2006 21:22:30 Loaded font:dingbats height:25 texture:512x512 chars:[32-256] miplevels:1
1-5-2006 21:22:30 Loaded font:font32 height:33 texture:256x256 chars:[48-59] miplevels:1
1-5-2006 21:22:30 Loaded font:font48 height:50 texture:256x256 chars:[48-59] miplevels:1
1-5-2006 21:22:30 Loaded font:font72 height:75 texture:512x512 chars:[48-59] miplevels:1
1-5-2006 21:22:30 Loaded font:fontSVT height:13 texture:512x512 chars:[32-256] miplevels:1
1-5-2006 21:22:30 Load skin BlueTwo
1-5-2006 21:22:30 LoadWindowPlugins()
1-5-2006 21:22:30 Load plugins from
lugins\windows\Dialogs.DLL1-5-2006 21:22:30 Load plugins from
lugins\windows\WindowPlugins.dll1-5-2006 21:22:31 Loading references from skin\BlueTwo\references.xml
1-5-2006 21:22:31 original skin size:720x576
1-5-2006 21:22:31 using sqlite 3.2.8
1-5-2006 21:22:32 StartImportXML: Initialize
1-5-2006 21:22:32 StartImportXML: Initialize
1-5-2006 21:22:32 StartImportXML: Initialize
1-5-2006 21:22:32 opening tvdatabase
1-5-2006 21:22:32 tvdatabase opened
1-5-2006 21:22:32 xml:skin\BlueTwo\tvOSD.xml image id:350 width:0 height:0 gfx:-
1-5-2006 21:22:32 xml:skin\BlueTwo\videoOSD.xml image id:350 width:0 height:0 gfx:-
1-5-2006 21:22:33 Load plugins from
lugins\windows\XihSolutions.DotMSN.DLL1-5-2006 21:22:33 WindowManager.Load
1-5-2006 21:22:33 load calib800x600.xml
1-5-2006 21:22:33 WindowManager.Preinitialize
1-5-2006 21:22:33 TexturePacker: Loaded skin\BlueTwo\packedgfx21.png texture:2048x2048 miplevels:1
1-5-2006 21:22:33 TexturePacker: fontengine add texure:199
1-5-2006 21:22:33 TexturePacker: Loaded skin\BlueTwo\packedgfx20.png texture:2048x2048 miplevels:1
1-5-2006 21:22:33 TexturePacker: fontengine add texure:198
1-5-2006 21:22:33 WindowManager.ActivateWindow
1-5-2006 21:22:33 xml:skin\BlueTwo\home.xml image id:1000 width:0 height:0 gfx:-
1-5-2006 21:22:34 window:MediaPortal.GUI.Home.HomeWindow init
1-5-2006 21:22:34 skin initialized
1-5-2006 21:22:34 DX9 size: 800x600
1-5-2006 21:22:34 video ram left:178176 KByte
1-5-2006 21:22:34 MAP: using default mappings for Hauppauge HCW
1-5-2006 21:22:34 Process: MediaPortal
1-5-2006 21:22:35 running...
1-5-2006 21:22:35 HCWHelper: Starting up
1-5-2006 21:22:35 MediaPortal.OnStartup()
1-5-2006 21:22:35 Recorder: card:1 video device:Hauppauge WinTV PVR PCI II Capture TV:True record:True priority:1
1-5-2006 21:22:35 PlugInManager.Load()
1-5-2006 21:22:35 Load plugins from
lugins\process\ProcessPlugins.dll1-5-2006 21:22:35 PlugInManager.Start()
1-5-2006 21:22:35 PowerScheduler: version 0.3
1-5-2006 21:22:35 PowerScheduler: Settings loaded - wakeup 1, shutdown 3, mode Suspend
1-5-2006 21:22:35 PowerScheduler: Shutdown timer activated, automatic shutdown in 3 minutes
1-5-2006 21:22:38 window:MediaPortal.GUI.Home.HomeWindow deinit
1-5-2006 21:22:38 texturemanager:CleanupThumbs()
1-5-2006 21:22:38 Recorder:enable dx9 exclusive mode
1-5-2006 21:22:38 goto fullscreen:True
1-5-2006 21:22:38 app
witch to fullscreen mode False1-5-2006 21:22:38 app
witched to fullscreen mode1-5-2006 21:22:38 window:MediaPortal.GUI.TV.GUITVHome init
1-5-2006 21:22:38 tv home init:Nederland 1
1-5-2006 21:22:38 GUITVHome.ViewChannel(): View channel=Nederland 1 ts:False
1-5-2006 21:22:38 add cmd:MediaPortal.TV.Recording.ViewTvCommand #1
1-5-2006 21:22:38 Command: view tv channel:Nederland 1
1-5-2006 21:22:38 Recorder: find free card
1-5-2006 21:22:38 Command
top all card except card:01-5-2006 21:22:38 key
YSTEM\CurrentControlSet\Enum\PCI\ven_4444&dev_0016&subsys_80030070&rev_01\4&1f7dbc9f&0&38f01-5-2006 21:22:38 LoadDefs for device at PCI bus 2, device 7
1-5-2006 21:22:40 video device moniker
devicenp:\\?\pci#ven_4444&dev_0016&subsys_80030070&rev_01#4&1f7dbc9f&0&38f0#{65e8773d-8f56-11d0-a3b9-00a0c9223196}\{9b365890-165f-11d0-a195-0020afd156e4}1-5-2006 21:22:40 captureDeviceDeviceName
devicenp:\\?\pci#ven_4444&dev_0016&subsys_80030070&rev_01#4&1f7dbc9f&0&38f01-5-2006 21:22:40 FindInstance
devicenp:\\?\pci#ven_4444&dev_0016&subsys_80030070&rev_01#4&1f7dbc9f&0&38f01-5-2006 21:22:40 key
YSTEM\CurrentControlSet\Enum\pci\ven_4444&dev_0016&subsys_80030070&rev_01\4&1f7dbc9f&0&38f01-5-2006 21:22:40 serviceName:hcwPP2
1-5-2006 21:22:40 key
YSTEM\CurrentControlSet\Services\hcwPP2\Enum1-5-2006 21:22:40 Number of cards:1
1-5-2006 21:22:40 card#0=PCI#VEN_4444&DEV_0016&SUBSYS_80030070&REV_01#4&1f7dbc9f&0&38F0
1-5-2006 21:22:40 using card:#0
1-5-2006 21:22:40 Using card#0
1-5-2006 21:22:40 filter tvtuner='Hauppauge WinTV PVR PCI II TvTuner' check:True
1-5-2006 21:22:40 filter tvaudio='Hauppauge WinTV PVR PCI II TvAudio' check:True
1-5-2006 21:22:40 filter crossbar='Hauppauge WinTV PVR PCI II Crossbar' check:True
1-5-2006 21:22:40 filter capture='Hauppauge WinTV PVR PCI II Capture' check:True
1-5-2006 21:22:40 filter encoder='Hauppauge WinTV PVR PCI II Encoder' check:True
1-5-2006 21:22:40 Recorder: use free card Hauppauge PVR150 prio:1 name:Hauppauge PVR150
1-5-2006 21:22:40 Recorder: start watching on card:Hauppauge PVR150 channel:Nederland 1
1-5-2006 21:22:41 TVCapture.CreateGraph() Card:1
1-5-2006 21:22:41 7 vmr9:ctor()
1-5-2006 21:22:41 7 vmr9:ctor() done:True
1-5-2006 21:22:41 SinkGraphEx:CreateGraph() IN
1-5-2006 21:22:41 SinkGraphEx: Create new filter graph (IGraphBuilder)
1-5-2006 21:22:41 SinkGraphEx: Get the Capture Graph Builder (ICaptureGraphBuilder2)
1-5-2006 21:22:41 SinkGraphEx: Link the CaptureGraphBuilder to the filter graph (SetFiltergraph)
1-5-2006 21:22:41 SinkGraphEx: Add graph to ROT table
1-5-2006 21:22:41 SinkGraphEx: Adding configured filters...
1-5-2006 21:22:41 SinkGraphEx: adding filter <Hauppauge> with moniker <device>
1-5-2006 21:22:41 SinkGraphEx: Added filter <Hauppauge> with moniker <device>
1-5-2006 21:22:41 SinkGraphEx: adding filter <Hauppauge> with moniker <device>
1-5-2006 21:22:41 SinkGraphEx: Added filter <Hauppauge> with moniker <device>
1-5-2006 21:22:41 SinkGraphEx: adding filter <Hauppauge> with moniker <device>
1-5-2006 21:22:41 SinkGraphEx: Added filter <Hauppauge> with moniker <device>
1-5-2006 21:22:41 SinkGraphEx: adding filter <Hauppauge> with moniker <device>
1-5-2006 21:22:41 SinkGraphEx: Added filter <Hauppauge> with moniker <device>
1-5-2006 21:22:41 SinkGraphEx: adding filter <Hauppauge> with moniker <device>
1-5-2006 21:22:41 SinkGraphEx: Added filter <Hauppauge> with moniker <device>
1-5-2006 21:22:41 SinkGraphEx: Adding configured filters...DONE
1-5-2006 21:22:41 SinkGraphEx: Adding configured pin connections...
1-5-2006 21:22:41 SinkGraphEx: Connecting <Hauppauge>:0 with <Hauppauge>:%tvtuner%
1-5-2006 21:22:41 SinkGraphEx: Found sourcePin: <0> <System>
1-5-2006 21:22:41 SinkGraphEx: Pins connected...
1-5-2006 21:22:41 SinkGraphEx: Connecting <Hauppauge>:1 with <Hauppauge>:0
1-5-2006 21:22:41 SinkGraphEx: Found sourcePin: <1> <System>
1-5-2006 21:22:41 SinkGraphEx: Found pin: <0> <System>
1-5-2006 21:22:41 SinkGraphEx: Pins connected...
1-5-2006 21:22:41 SinkGraphEx: Connecting <Hauppauge>:0 with <Hauppauge>:%audiotuner%
1-5-2006 21:22:41 SinkGraphEx: Found sourcePin: <0> <System>
1-5-2006 21:22:41 SinkGraphEx: Pins connected...
1-5-2006 21:22:41 SinkGraphEx: Connecting <Hauppauge>:0 with <Hauppauge>:0
1-5-2006 21:22:41 SinkGraphEx: Found sourcePin: <0> <System>
1-5-2006 21:22:41 SinkGraphEx: Found pin: <0> <System>
1-5-2006 21:22:41 SinkGraphEx: Pins connected...
1-5-2006 21:22:41 SinkGraphEx: Connecting <Hauppauge>:1 with <Hauppauge>:1
1-5-2006 21:22:41 SinkGraphEx: Found sourcePin: <1> <System>
1-5-2006 21:22:41 SinkGraphEx: Found pin: <1> <System>
1-5-2006 21:22:41 SinkGraphEx: Pins connected...
1-5-2006 21:22:41 SinkGraphEx: Connecting <Hauppauge>:3 with <Hauppauge>:0
1-5-2006 21:22:41 SinkGraphEx: Found sourcePin: <3> <System>
1-5-2006 21:22:41 SinkGraphEx: Found pin: <0> <System>
1-5-2006 21:22:41 SinkGraphEx: Pins connected...
1-5-2006 21:22:41 SinkGraphEx: Adding configured pin connections...DONE
1-5-2006 21:22:41 VideoCaptureDevice: found output pin
1-5-2006 21:22:41 VideoCaptureDevice:get Video stream control interface (IAMStreamConfig)
1-5-2006 21:22:41 VideoCaptureDevice:got IAMStreamConfig for Capture
1-5-2006 21:22:41 SWGraph:capture FrameRate set to 25
1-5-2006 21:22:41 VideoCaptureDevice: capture FrameRate done :25
1-5-2006 21:22:41 VideoCaptureDevice:change capture Framesize :720x576 ->720x576
1-5-2006 21:22:41 SinkGraphEx: Capturing:720x576
1-5-2006 21:22:41 mpeg2:add new MPEG2 Demultiplexer to graph
1-5-2006 21:22:41 mpeg2:create video out pin on MPEG2 demuxer
1-5-2006 21:22:41 mpeg2:create mpeg audio out pin on MPEG2 demuxer
1-5-2006 21:22:41 mpeg2:create lpcm audio out pin on MPEG2 demuxer
1-5-2006 21:22:41 mpeg2:find MPEG2 demuxer input pin
1-5-2006 21:22:41 mpeg2:found MPEG2 demuxer input pin
1-5-2006 21:22:41 mpeg2:MPEG2 demuxer map MPG stream 0xe0->video output pin
1-5-2006 21:22:41 Exception
ystem.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.at DirectShowLib.IMPEG2StreamIdMap.MapStreamId(Int32 ulStreamId, MPEG2Program MediaSampleContent, Int32 ulSubstreamFilterValue, Int32 iDataOffset)
at DShowNET.Helper.MPEG2Demux.CreateMappings()
at MediaPortal.TV.Recording.SinkGraphEx.CreateGraph(Int32 Quality)
1-5-2006 21:22:41 Exception :Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
1-5-2006 21:22:41 site :Int32 MapStreamId(Int32, DirectShowLib.MPEG2Program, Int32, Int32)
1-5-2006 21:22:41 source
irectShowLib1-5-2006 21:22:41 stacktrace: at DirectShowLib.IMPEG2StreamIdMap.MapStreamId(Int32 ulStreamId, MPEG2Program MediaSampleContent, Int32 ulSubstreamFilterValue, Int32 iDataOffset)
at DShowNET.Helper.MPEG2Demux.CreateMappings()
at MediaPortal.TV.Recording.SinkGraphEx.CreateGraph(Int32 Quality)
1-5-2006 21:22:41 Command:MediaPortal.TV.Recording.ViewTvCommand failed reason:TV starten niet gelukt
Unable to create graph time:2812,5 msec
1-5-2006 21:22:41 Recorder: Card:Hauppauge PVR150 idle
1-5-2006 21:22:41 WindowManager:route MediaPortal.GUI.TV.GUITVHome:1->MediaPortal.Dialogs.GUIDialogOK:2002
1-5-2006 21:22:41 window:MediaPortal.Dialogs.GUIDialogOK init
1-5-2006 21:22:42 render exception
ystem.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.at Microsoft.Win32.Win32Native.CoTaskMemAlloc(Int32 cb)
at System.Runtime.InteropServices.Marshal.StringToCoTaskMemUni(String s)
at MediaPortal.GUI.Library.GUIFont.DrawText(Single xpos, Single ypos, Color color, String text, RenderFlags flags, Int32 maxWidth)
at MediaPortal.GUI.Library.GUIFont.DrawText(Single xpos, Single ypos, Int64 color, String label, Alignment alignment, Int32 maxWidth)
at MediaPortal.GUI.Library.GUILabelControl.Render(Single timePassed)
at MediaPortal.GUI.Library.GUIWindow.Render(Single timePassed)
1-5-2006 21:22:46 PowerScheduler: next scheduled event 1-1-2100 1:00:00 triggered by: Power Scheduler
1-5-2006 21:22:46 PowerScheduler: Set wakeup timer at 1-1-2100 0:59:00
1-5-2006 21:22:46 PowerScheduler: Shutdown timer deactivated
1-5-2006 21:22:46 WindowManager:unroute to MediaPortal.Dialogs.GUIDialogOK:2002->MediaPortal.GUI.TV.GUITVHome:1
1-5-2006 21:22:48 GUIFont:texture disposing:0 debug
1-5-2006 21:22:48 GUIFont:texture disposing:1 font10
1-5-2006 21:22:48 GUIFont:texture disposing:2 font12
1-5-2006 21:22:48 GUIFont:texture disposing:3 font13
1-5-2006 21:22:48 GUIFont:texture disposing:4 font14
1-5-2006 21:22:48 GUIFont:texture disposing:5 font16
1-5-2006 21:22:48 GUIFont:texture disposing:6 font18
1-5-2006 21:22:48 GUIFont:texture disposing:7 dingbats
1-5-2006 21:22:48 GUIFont:texture disposing:8 font32
1-5-2006 21:22:48 GUIFont:texture disposing:9 font48
1-5-2006 21:22:48 GUIFont:texture disposing:10 font72
1-5-2006 21:22:48 GUIFont:texture disposing:11 fontSVT
1-5-2006 21:22:48 TexturePacker: disposing texture:199
1-5-2006 21:22:48 TexturePacker: disposing texture:198
1-5-2006 21:22:48 MediaPortal.OnExit()
1-5-2006 21:22:49 Recorder
top all tuners1-5-2006 21:22:49 Recorder
top card:Hauppauge PVR1501-5-2006 21:22:49 TVCapture.Stop() Card:1
1-5-2006 21:22:49 TVCapture.DeleteGraph() Card:1
1-5-2006 21:22:49 Commandprocessor stopped
1-5-2006 21:22:49 HCWHelper: Shutting down
1-5-2006 21:22:49 PlugInManager.Stop()
1-5-2006 21:22:49 PluginManager: stopping ProcessPlugins.DiskSpace.DiskManagement
1-5-2006 21:22:49 PluginManager: stopping ProcessPlugins.DiskSpace.EpisodeManagement
1-5-2006 21:22:49 PluginManager: stopping ProcessPlugins.DiskSpace.RecordingManagement
1-5-2006 21:22:49 PluginManager: stopping MediaPortal.PowerScheduler.NVPPowerScheduler
1-5-2006 21:22:54 PowerScheduler: Stop()
1-5-2006 21:22:54 PluginManager: stopping ProcessPlugins.TVNotifies.NotifyManager
1-5-2006 21:22:54 fonts.Dispose()
1-5-2006 21:22:55 MediaPortal done
1-5-2006 21:22:55 mpeg2: close interfaces
1-5-2006 21:22:55 dbs:close
rogramDatabaseV4.db31-5-2006 21:22:55 dbs:close:TVDatabaseV21.db3
So you get the logging 'Exception
ystem.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.' So this seems like a software issue to me. Perhaps I now really should start debugging this whole thing. However upto now my skills are 'only' assembly and C/C++. Perhaps this is a good starting point for improving my C# skills....May not be related, but try uninstalling ffdshow. I had problems with my (completely different, USB) tuner until I did. I now also tend to use Mpeg2Dec video and MPEG.... audio codecs, only using my native tuner codecs when testing a new release of MP (to ensure tuner still working). I also use the tuner's bespoke software as a control check as well (Presto!PVR).
ffdshow caused my problems - rather worrying, when it's supposed to be supported and recommended to improve video quality!!
ffdshow caused my problems - rather worrying, when it's supposed to be supported and recommended to improve video quality!!
- Thread starter
- #30
I have it finally working!
The problem was solved after I uninstalled the Elecard codecs. Interesting enough these codecs were *NOT* configured for MyTV.
Thanks to everyone of the great MP community in assisting me with this nasty issue. I always heard great stories of the Elecard codecs but apparently this time it costed me a LOT of time...
(BTW: with RC2 I also used the Elecard codecs and didn't had any issues with it)
The problem was solved after I uninstalled the Elecard codecs. Interesting enough these codecs were *NOT* configured for MyTV.
Thanks to everyone of the great MP community in assisting me with this nasty issue. I always heard great stories of the Elecard codecs but apparently this time it costed me a LOT of time...
(BTW: with RC2 I also used the Elecard codecs and didn't had any issues with it)