Resume from Stand By (1 Viewer)

[infinite.loop]

i believe it's related somehow to the Skystar2 and a new error that is showing in the logs regarding directx.

that would be uncommon, because i use this workound, with PVR-Scheduler, now on 5 HTPCs with Skystar2, 2 HTPCs with floppydtv and 2HTPCs with Nova-S.

Absolutely no issues with resume (manualy or scheduled Recordings) from hibernate reported until now (with PVR-Schdeuler of course).

 

[mdsflyer]

Hi there once more, i tried again today and i've included the following logs. My recording that i tried of "gary the rat" (honestly it was for testing purposes only!!) starts at the corret time (from 0:55 to 1:20 with a 2 minute pre/post record) but after 2 minutes and at 0:55 the recording is stopped and the computer once again enters standby. Interestingly later on it wakes up and records the simpsons perfectly. I say interestingly as the simpsons was recorded on my hauppauge card, gary the rat was on the skystar2. So i've included my recorder log and the error log. I hope you can see something that could help as i'm pulling what is left of my hair out.

Cheers
m

recorder.log
30/03/2006 00:53:16 Recorder: card:1 video device:B2C2 MPEG-2 Source TV:True record:True priority:1
30/03/2006 00:53:16 Recorder: card:2 video device:Hauppauge WinTV PVR PCI II Capture TV:True record:True priority:1
30/03/2006 00:53:17 Recorder: time to record 'Gary The Rat' on channel:TV2 from 00:55:00-01:20:00 id:176 priority:2147483517 quality:NotSet Once
30/03/2006 00:53:17 Recorder: program:00:55:00-01:20:00
30/03/2006 00:53:17 Recorder: using cardkystar 2 prio:1
30/03/2006 00:53:18 Recorder: recording started 'Gary The Rat' on channel:TV2 from 00:55:00-01:20:00 id:176 priority:2147483517 quality:NotSet
30/03/2006 00:53:18 Recorder: recording state changed
30/03/2006 00:53:18 Recorder: Cardkystar 2 recording tv channel:TV2
30/03/2006 00:53:18 Recorder: Card:Hauppauge PVR150MCE idle
30/03/2006 00:55:20 Recordertop all tuners
30/03/2006 00:55:20 Recordertop cardkystar 2
30/03/2006 00:55:21 Recorder: recording ended 'Gary The Rat' on channel:TV2 from 00:55:00-01:20:00 id:176 priority:2147483517 quality:NotSet
30/03/2006 00:55:21 diskmanagement: recording Gary The Rat ended. type:Once max episodes:2147483647
30/03/2006 00:55:21 Recorder: recording state changed
30/03/2006 00:55:21 Recordertop card:Hauppauge PVR150MCE
30/03/2006 00:55:21 Commandprocessor stopped
30/03/2006 16:58:05 Recorder: card:1 video device:B2C2 MPEG-2 Source TV:True record:True priority:1
30/03/2006 16:58:05 Recorder: card:2 video device:Hauppauge WinTV PVR PCI II Capture TV:True record:True priority:1
30/03/2006 16:58:05 Recorder: time to record 'The Simpsons' on channel:TV3 from 17:00:00-17:30:00 id:153 priority:2147483537 quality:NotSet Once
30/03/2006 16:58:05 Recorder: program:17:00:00-17:30:00
30/03/2006 16:58:05 Recorder: using card:Hauppauge PVR150MCE prio:1
30/03/2006 16:58:05 Recorder:disable dx9 exclusive mode
30/03/2006 16:58:08 Recorder: recording started 'The Simpsons' on channel:TV3 from 17:00:00-17:30:00 id:153 priority:2147483537 quality:NotSet
30/03/2006 16:58:08 Recorder: recording state changed
30/03/2006 16:58:08 Recorder: recording state changed
30/03/2006 16:58:08 Recorder: Cardkystar 2 idle
30/03/2006 16:58:08 Recorder: Card:Hauppauge PVR150MCE recording tv channel:TV3
30/03/2006 16:58:14 Recorder:disable dx9 exclusive mode
30/03/2006 16:58:17 Recorder:disable dx9 exclusive mode
30/03/2006 17:32:00 Recorder: recording ended 'The Simpsons' on channel:TV3 from 17:00:00-17:30:00 id:153 priority:2147483537 quality:NotSet
30/03/2006 17:32:00 diskmanagement: recording The Simpsons ended. type:Once max episodes:2147483647
30/03/2006 17:32:00 Recorder: recording state changed
30/03/2006 17:32:00 Recorder: recording state changed
30/03/2006 17:33:11 Recordertop all tuners
30/03/2006 17:33:11 Recordertop cardkystar 2
30/03/2006 17:33:11 Recordertop card:Hauppauge PVR150MCE
30/03/2006 17:33:11 Commandprocessor stopped


error.log
30/03/2006 16:57:50 Exception :Error in the application.
-2005530520 (D3DERR_DEVICELOST)
at Microsoft.DirectX.Direct3D.Device.PresentInternal(tagRECT* sourceRectangle, tagRECT* destRectangle, IntPtr overrideWindow)
at Microsoft.DirectX.Direct3D.Device.PresentInternal(tagRECT* sourceRectangle, tagRECT* destRectangle, Control overrideWindow)
at Microsoft.DirectX.Direct3D.Device.Present()
at MediaPortalApp.Render(Single timePassed)
30/03/2006 16:57:50 Exception :Error in the application.
30/03/2006 16:57:55 site :Void PresentInternal(Microsoft.DirectX.PrivateImplementationDetails.tagRECT*, Microsoft.DirectX.PrivateImplementationDetails.tagRECT*, IntPtr)
30/03/2006 16:57:59 source :Microsoft.DirectX.Direct3D
30/03/2006 16:57:59 stacktrace: at Microsoft.DirectX.Direct3D.Device.PresentInternal(tagRECT* sourceRectangle, tagRECT* destRectangle, IntPtr overrideWindow)
at Microsoft.DirectX.Direct3D.Device.PresentInternal(tagRECT* sourceRectangle, tagRECT* destRectangle, Control overrideWindow)
at Microsoft.DirectX.Direct3D.Device.Present()
at MediaPortalApp.Render(Single timePassed)

 

[infinite.loop]

Hi there once more, i tried again today and i've included the following logs. My recording that i tried of "gary the rat" (honestly it was for testing purposes only!!) starts at the corret time (from 0:55 to 1:20 with a 2 minute pre/post record) but after 2 minutes and at 0:55 the recording is stopped and the computer once again enters standby. Interestingly later on it wakes up and records the simpsons perfectly. I say interestingly as the simpsons was recorded on my hauppauge card, gary the rat was on the skystar2.

If you are using the PVR-Scheduler (as suggested) to manage hibernate and resume, i think that could also be caused by a missconfiguration of PVR-Scheduler, since MediaPortals PowerScheduler must be dissabled.

The windows power management settings to automatically send the PC into hibernate must also be off.

You are using 2 DVB Cards? which Windows do you use?

 

[mdsflyer]

Hi again, and thanks for your efforts it is appreciated. I'm using XP SP2, th hauppauge is a PVR150, so i have a dvb-s card (skystar2) and the analogue hauppauge. Windows power management is set to "never" for everything and i have made sure power scheduler is disabled also. There is a new release of PVR-s out so i will try it and see if my luck improves. Cheers m.

 

[Paranoid Delusion]

If still having problems try posting STSC at PVR-schedulers forum.
He is the Expert after all

Won't take the mick out of Gary the Rat :lol:

 

[mdsflyer]

Thanks to all who have helped with this, i've solved the problem by getting the system to hibernate rather than standby between recordings. This appears to have made the system much more stable in general and has also solved my problem with the webbrowser plugin not working after a resume. The only downside is i had my remote set up so it could wake the system up from standby, when in hibernate everything seems dead, but it really was an option that i did just to see if i could. To anyone whose system works fine after a reboot but seems a little weird after a resume from standby i'd recommend hibernate as an option. I used a program called dumppo.exe to guarantee my S4 hibernate setting, good stuff over on the green button website about it.