Codecs SAF v5.02 *final* (based on FFDShow DXVA decoder) (19 Viewers)

[Truri]

AW: SAF v5.00 experimental (based on FFDShow DXVA decoder)

Hi,

any idea why I can't play that video?
Also Graphstudio can't render the file.

After I remuxxed it into a mkv container, it works. So its not really a big deal, but...

General
Complete name                    : \\Server\h\MyAnimes 2\Noein - Mou Hitori no Kimi e\Noein - 01 XviD.avi
Format                           : AVI
Format/Info                      : Audio Video Interleave
Format profile                   : OpenDML
File size                        : 172 MiB
Duration                         : 25mn 29s
Overall bit rate                 : 943 Kbps
Writing application              : AVI-Mux GUI 1.17.4.3, Nov 14 2005  20:11:25

Video
ID                               : 0
Format                           : MPEG-4 Visual
Format profile                   : Advanced Simple@L5
Format settings, BVOP            : Yes
Format settings, QPel            : No
Format settings, GMC             : No warppoints
Format settings, Matrix          : Default (H.263)
Muxing mode                      : Packed bitstream
Codec ID                         : XVID
Codec ID/Hint                    : XviD
Duration                         : 25mn 29s
Bit rate                         : 806 Kbps
Width                            : 704 pixels
Height                           : 396 pixels
Display aspect ratio             : 16:9
Frame rate                       : 23.976 fps
Resolution                       : 8 bits
Colorimetry                      : 4:2:0
Scan type                        : Progressive
Bits/(Pixel*Frame)               : 0.121
Stream size                      : 147 MiB (85%)
Writing library                  : XviD 1.1.0 (UTC 2005-11-22)

Audio
ID                               : 1
Format                           : MPEG Audio
Format version                   : Version 1
Format profile                   : Layer 3
Mode                             : Joint stereo
Codec ID                         : 55
Codec ID/Hint                    : MP3
Duration                         : 25mn 29s
Bit rate mode                    : Constant
Bit rate                         : 128 Kbps
Channel(s)                       : 2 channels
Sampling rate                    : 48.0 KHz
Stream size                      : 23.3 MiB (14%)
Alignment                        : Aligned on interleaves
Interleave, duration             : 24 ms (0.58 video frame)
Interleave, preload duration     : 192 ms
Title                            : ton1

 

[zicoz]

Re: SAF v5.00 experimental (based on FFDShow DXVA decoder)

Does the unlocked 5.0 test come with the PowerDVD FLVsplitter? If so, where is it located after installation?

 

[hoborg]

Re: AW: SAF v5.00 experimental (based on FFDShow DXVA decoder)

Hi,

any idea why I can't play that video?
Also Graphstudio can't render the file.

After I remuxxed it into a mkv container, it works. So its not really a big deal, but...

Try TEST SAF5 build. If not help, please post your SAF logs and small sample of not working AVI, i will take a look.

Does the unlocked 5.0 test come with the PowerDVD FLVsplitter? If so, where is it located after installation?

Yes.
Win system folder.

 

[wonkyd]

Re: SAF v5.00 experimental (based on FFDShow DXVA decoder)

Yep it is set to FFDShow DXVA. It is working as expected in the supplied MPC-HC which I can confirm with GraphStudio. I have not tested loading the file in graph studio itself however. Using latest SAF5 beta

No idea what failing to load DXVA decoder in MePo.
Can you try play this file in MePo and post MePo LOGs then?

Hi Hoborg,

I have just played the file in MediaPortal and MPC-HC. Please find logs for media portal and graphedit screenshots attached.

 

[niels37]

Re: SAF v5.00 experimental (based on FFDShow DXVA decoder)

Hello all,

I use saf 5 on a newely installed mp rc6 on my newely build htpc
Before i installed saf i deinstalled all codecs and ran ccleaner to remove any possible remains of codec shark.

I went from my motherboard ( 890gx) to my receiver ( amp) by a optical spdif.

Here comes the problem : i do get sound ! BUT my subwoofer ( active one , with own amp) isn't activated.
Ofcourse i set fddshow audio as spdif passthrough. What else can i do to get my subwoofer to produce sound? The source i use is a dvd file ( video_ts) AVATAR with 5.1 sound so thats certainly not the problem . ( btw i had exactly the same problems before with my old configuration and for the record my sub is not broken! )

What should i do? cause i haven't got a clue!

Niels

A bit dumb perhaps , but i had to turn on my sub on reveiver ............solved :sorry:

 

[kkendall]

Re: SAF v5.00 experimental (based on FFDShow DXVA decoder)

Hi Hoborg,

Is it ossible to integrate the PDVD10 decoder (and the PDVD10 flv splitter) into SAF unlocked?

 

[mylle]

Re: SAF v5.00 experimental (based on FFDShow DXVA decoder)

Hi Hoborg,

Is it ossible to integrate the PDVD10 decoder (and the PDVD10 flv splitter) into SAF unlocked?

Probably not. I assume it has to do with the fact that you really SHOULD pay for PDVD10 etc.

 

[wonkyd]

Re: SAF v5.00 experimental (based on FFDShow DXVA decoder)

Yep it is set to FFDShow DXVA. It is working as expected in the supplied MPC-HC which I can confirm with GraphStudio. I have not tested loading the file in graph studio itself however. Using latest SAF5 beta

No idea what failing to load DXVA decoder in MePo.
Can you try play this file in MePo and post MePo LOGs then?

Hi Hoborg,

I have just played the file in MediaPortal and MPC-HC. Please find logs for media portal and graphedit screenshots attached.

Looking into it it seems to be a problem with the Blu-Ray handler plugin. The same file in MovingPictures plays correctly. Sorry to waste your time.

 

[garfms]

Re: SAF v5.00 experimental (based on FFDShow DXVA decoder)

Hi Hoborg,

Is it ossible to integrate the PDVD10 decoder (and the PDVD10 flv splitter) into SAF unlocked?

Probably not. I assume it has to do with the fact that you really SHOULD pay for PDVD10 etc.

hmm, interesting.. again, is it possible to integrate an actual bought and paid PDVD10 decoder (+ splitter) into SAF? And maybe there at least any advantages?

 

[Steffenjones]

Re: SAF v5.00 experimental (based on FFDShow DXVA decoder)

Hi all, Hi hoborg,

at the moment i have installed saf 5. (saf500svn100401 unlocked)
I use Mediaportal 1.1.0 Final

My Problem is i have a red line in the middel of my screen.

The line is vertical !

How I disable this line ?

Thx Steffen