Codecs SAF v5.02 *final* (based on FFDShow DXVA decoder) (21 Viewers)

[hoborg]

Re: SAF v5.00 experimental (based on FFDShow DXVA decoder)

Hi Hoborg,
i'd like to install PureAudio pluging and ASIO4ALL driver.
Can i have some problem with SAF?

Thanks
mamachan

No idea sorry...

 

[metagrobolis]

Re: SAF v5.00 experimental (based on FFDShow DXVA decoder)

I use TOSLINK to the receiver, so audio passthrough to SPDIF is indeed enabled. Can you confirm that the sample is mapping to the default (as opposed to the xMP4@50) preset in your setup.

Just for test, try to disable passthrough.

Tried minus passthrough, no difference. I'm out of ideas on what to try next. Is there a logfile and/or debuging dll that I could use to get at more information?

 

[matpe]

Re: SAF v5.00 experimental (based on FFDShow DXVA decoder)

Hi Hoborg,
i'd like to install PureAudio pluging and ASIO4ALL driver.
Can i have some problem with SAF?

Thanks
mamachan

I use Pure Audio plugin and ASIO4ALL, and have no problem with SAF

 

[Pog]

Re: AW: SAF v5.00 experimental (based on FFDShow DXVA decoder)

PDVD decoders FINALLY working for me too on Win7 64bit

I hope it stays that way as I've only had them in for a few hours...

 

[mamachan]

Re: SAF v5.00 experimental (based on FFDShow DXVA decoder)

Hi Hoborg,
i'd like to install PureAudio pluging and ASIO4ALL driver.
Can i have some problem with SAF?

Thanks
mamachan

I use Pure Audio plugin and ASIO4ALL, and have no problem with SAF

Thanks

 

[Cook]

Re: SAF v5.00 experimental (based on FFDShow DXVA decoder)

@ Hoborg (or anyone else with sound advice!):

I am completely new to this, so please bear with me.
Thanks in advance for this package, as it seems to be a lot of work and upkeep!

I am about to install the latest SAF (101201).
I have the following setup:
1) Windows 7 (64 bit)
2) i5-760 CPU
3) nVidia gt-430 (HDMI with HD-audio bitstreaming capability)
4) TMT3 installed, but no other additional codecs or codec packs
5) PC is hooked up via HDMI to an Onkyo HT-RC260 receiver (with all the HD-audio decoding capabilities)

I want to bitstream everything (DD, DTS, DTS-HD Master, TrueHD, etc.) from within Media Portal.
I assume I will start backing-up my BluRays to M2TS or MKV single files (unless there is a better solution?).
As of now, I am having MePo pull up TMT3 for my existing M2TS and MKV files (they have AC3 audio only).
(For these, TMT3 currently down-mixes from AC3 5.1 to 2-channel PCM over HDMI to the receiver ).
Now I will start getting into HD-audio and need a solution for everything.

Here are some quesitons I have before I start:
A) Do I have to worry about the TMT3 software or codecs (either causing conflicts or being disabled)?
B) For my Audio Renderer, should I register the one from Arcsoft TMT3 or use the default system one?
C) Could I ask why your guide in the first post doesn't show the renderer being used (just curious).


Thanks, and please accept my appologies if these are dumb questions.



Cook

 

[hoborg]

Re: SAF v5.00 experimental (based on FFDShow DXVA decoder)

@ Hoborg (or anyone else with sound advice!):

I am completely new to this, so please bear with me.
Thanks in advance for this package, as it seems to be a lot of work and upkeep!

I am about to install the latest SAF (101201).
I have the following setup:
1) Windows 7 (64 bit)
2) i5-760 CPU
3) nVidia gt-430 (HDMI with HD-audio bitstreaming capability)
4) TMT3 installed, but no other additional codecs or codec packs
5) PC is hooked up via HDMI to an Onkyo HT-RC260 receiver (with all the HD-audio decoding capabilities)

I want to bitstream everything (DD, DTS, DTS-HD Master, TrueHD, etc.) from within Media Portal.
I assume I will start backing-up my BluRays to M2TS or MKV single files (unless there is a better solution?).
As of now, I am having MePo pull up TMT3 for my existing M2TS and MKV files (they have AC3 audio only).
(For these, TMT3 currently down-mixes from AC3 5.1 to 2-channel PCM over HDMI to the receiver ).
Now I will start getting into HD-audio and need a solution for everything.

Here are some quesitons I have before I start:
A) Do I have to worry about the TMT3 software or codecs (either causing conflicts or being disabled)?
B) For my Audio Renderer, should I register the one from Arcsoft TMT3 or use the default system one?
C) Could I ask why your guide in the first post doesn't show the renderer being used (just curious).


Thanks, and please accept my appologies if these are dumb questions.



Cook

Sorry, but i dont help you with this, i dont have reciever...

 

[Cook]

Re: SAF v5.00 experimental (based on FFDShow DXVA decoder)

@ Hoborg (or anyone else with sound advice!):

I am completely new to this, so please bear with me.
Thanks in advance for this package, as it seems to be a lot of work and upkeep!

I am about to install the latest SAF (101201).
I have the following setup:
1) Windows 7 (64 bit)
2) i5-760 CPU
3) nVidia gt-430 (HDMI with HD-audio bitstreaming capability)
4) TMT3 installed, but no other additional codecs or codec packs
5) PC is hooked up via HDMI to an Onkyo HT-RC260 receiver (with all the HD-audio decoding capabilities)

I want to bitstream everything (DD, DTS, DTS-HD Master, TrueHD, etc.) from within Media Portal.
I assume I will start backing-up my BluRays to M2TS or MKV single files (unless there is a better solution?).
As of now, I am having MePo pull up TMT3 for my existing M2TS and MKV files (they have AC3 audio only).
(For these, TMT3 currently down-mixes from AC3 5.1 to 2-channel PCM over HDMI to the receiver ).
Now I will start getting into HD-audio and need a solution for everything.

Here are some quesitons I have before I start:
A) Do I have to worry about the TMT3 software or codecs (either causing conflicts or being disabled)?
B) For my Audio Renderer, should I register the one from Arcsoft TMT3 or use the default system one?
C) Could I ask why your guide in the first post doesn't show the renderer being used (just curious).


Thanks, and please accept my appologies if these are dumb questions.



Cook

Sorry, but i dont help you with this, i dont have reciever...

Thanks hoborg, sorry to bother you.
Is there anyone else with a similar setup that could provide some input?
I want to make sure I get this right the first time, instead of piling on codecs and choking my clean install.



Cook

 

[hoborg]

Re: SAF v5.00 experimental (based on FFDShow DXVA decoder)

Thanks hoborg, sorry to bother you.
Is there anyone else with a similar setup that could provide some input?
I want to make sure I get this right the first time, instead of piling on codecs and choking my clean install.



Cook

No problem, maybe this can help? (not sure if info is still valid...)
ffdshow tryout project : HD audio discussion - Doom9's Forum

 

[Cook]

Re: SAF v5.00 experimental (based on FFDShow DXVA decoder)

Thanks hoborg, sorry to bother you.
Is there anyone else with a similar setup that could provide some input?
I want to make sure I get this right the first time, instead of piling on codecs and choking my clean install.



Cook

No problem, maybe this can help? (not sure if info is still valid...)
ffdshow tryout project : HD audio discussion - Doom9's Forum

Thanks for the link hoborg.
This brings a question that you may be able to help me with (even though you don't have a receiver).
The Doom9 info is pretty much saying to use FFDShow Tryout with MPC-HC for the mpeg splitter and standalone filters.
Isn't that exactly what SAF would do for me?
Would there be any differences?

Thanks again for your help,
Cook