Codecs SAF v5.02 *final* (based on FFDShow DXVA decoder) (21 Viewers)
- Thread starter hoborg
- Start date
- Thread starter
- #2,222
Re: SAF v5.00 experimental (based on FFDShow DXVA decoder)
You need to rename them to *.MOVSD or *.QT
You need to rename them to *.MOVSD or *.QT
- June 1, 2008
- 3,272
- 212
- Home Country
-
Germany
AW: SAF v5.00 experimental (based on FFDShow DXVA decoder)
Thanks for the Update,
the Dolby decoder works again !!If I connect as PCM first select
I had some questions about the ffdshow audio codec:.
1: What's the difference : Enable - Encode 5.1 streams only and Disabled - Encode 5.1 streams only ? Encodes the 5.1 stream not my AV receiver?
2: What does this have on the PCM itself? : If I select "connect as PCM first" I have no more control on my receiver, the display shows only straight and it is only stereo.
but if i disable "connect as PCM first" I can simulate the stereo sound with my receiver in 5.1 sound and have full control over my receiver !!
What is the disadvantage of this option before or ? I'm sacrificing quality in the Sound ?
Thanks for the Update,
the Dolby decoder works again !!If I connect as PCM first select
I had some questions about the ffdshow audio codec:.
1: What's the difference : Enable - Encode 5.1 streams only and Disabled - Encode 5.1 streams only ? Encodes the 5.1 stream not my AV receiver?
2: What does this have on the PCM itself? : If I select "connect as PCM first" I have no more control on my receiver, the display shows only straight and it is only stereo.
but if i disable "connect as PCM first" I can simulate the stereo sound with my receiver in 5.1 sound and have full control over my receiver !!
What is the disadvantage of this option before or ? I'm sacrificing quality in the Sound ?
- Thread starter
- #2,225
Re: SAF v5.00 experimental (based on FFDShow DXVA decoder)
You need to test it in Graphstudio (START, SAF, tools - Graphstudio)
Enable 5.1 olny - only 5.1 streams will be encoded to AC3, disable - all will be encoded to AC3
connect as PCM first - some recievers need this option enabled.
You need to test it in Graphstudio (START, SAF, tools - Graphstudio)
Enable 5.1 olny - only 5.1 streams will be encoded to AC3, disable - all will be encoded to AC3
connect as PCM first - some recievers need this option enabled.
Re: SAF v5.00 experimental (based on FFDShow DXVA decoder)
Graphstudio - shows QT video in. Audio to FFdshow audiod ecoder in and out to directsound dev.
Video into EVR input (enhanced video renderer) then now output from that box in the flow chart.
clicking "PLAY" button in graph studio does play it.
just enhanced video renderer has no output device.
I'll attach the flow chart.
Hey Hoborg - just noticed you posts say "Amiga emulation" - I use to have 3-4 amiga's and a video toaster. I use to run a lightwave bbs. You still doing Amiga anything?
My .m2ts files use to run before FAS5 install - now lock up - graph studio charts them like (below) but when I click the play icon it also locked up.
Graphstudio - shows QT video in. Audio to FFdshow audiod ecoder in and out to directsound dev.
Video into EVR input (enhanced video renderer) then now output from that box in the flow chart.
clicking "PLAY" button in graph studio does play it.
just enhanced video renderer has no output device.
I'll attach the flow chart.
Hey Hoborg - just noticed you posts say "Amiga emulation" - I use to have 3-4 amiga's and a video toaster. I use to run a lightwave bbs. You still doing Amiga anything?
My .m2ts files use to run before FAS5 install - now lock up - graph studio charts them like (below) but when I click the play icon it also locked up.
- Thread starter
- #2,227
Re: SAF v5.00 experimental (based on FFDShow DXVA decoder)
rojoyinc:
Both graphs are correct.
MOV - can you post me small video sample to test?
m2ts - what is inside your m2ts - h.264 or VC-1? try disable DxVA - START - SAF - FFDshow - configure FDDShow DxVA decoder - here uncheck h.264 and VC-1 and try again.
About Amiga - i created easy emulator solution to play Amiga games on PC, just click on icon to play it. This project is known as WHA and it is about 10 years since started working on it
rojoyinc:
Both graphs are correct.
MOV - can you post me small video sample to test?
m2ts - what is inside your m2ts - h.264 or VC-1? try disable DxVA - START - SAF - FFDshow - configure FDDShow DxVA decoder - here uncheck h.264 and VC-1 and try again.
About Amiga - i created easy emulator solution to play Amiga games on PC, just click on icon to play it. This project is known as WHA and it is about 10 years since started working on it
Re: SAF v5.00 experimental (based on FFDShow DXVA decoder)
Off topic (amiga) what about reading the amiga floppies? I have prolly a 1000 games/floppys... if they're still any good - been on the shelf in the garage.
My .m2ts specs. (Actually these vids are from my daughters camera - so not as imporant as my vidoes)
General
ID : 0
Complete name : F:\My Videos\Easton\20101210_210914.m2ts
Format : BDAV
Format/Info : Blu-ray Video
File size : 251 MiB
Duration : 2mn 18s
Overall bit rate : 15.2 Mbps
Maximum Overall bit rate : 18.0 Mbps
Video
ID : 4113 (0x1011)
Menu ID : 1 (0x1)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4.0
Format settings, CABAC : No
Format settings, ReFrames : 1 frame
Frame mode : Frame doubling
Codec ID : 27
Duration : 2mn 18s
Bit rate mode : Variable
Bit rate : 14.4 Mbps
Maximum bit rate : 16.6 Mbps
Width : 1 280 pixels
Height : 720 pixels
Display aspect ratio : 16:9
Frame rate : 29.970 fps
Standard : NTSC
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.520
Stream size : 237 MiB (95%)
Audio
ID : 4352 (0x1100)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Codec ID : 129
Duration : 2mn 18s
Bit rate mode : Constant
Bit rate : 192 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Stream size : 3.17 MiB (1%)
My .movs (From Canon 5DMkII
General
Complete name : F:\My Videos\Studio video\trad-senior\MVI_2154.QT
Format : MPEG-4
Format profile : QuickTime
Codec ID : qt
File size : 3.99 GiB
Duration : 13mn 2s
Overall bit rate : 43.8 Mbps
Encoded date : UTC 2010-12-20 02:09:02
Tagged date : UTC 2010-12-20 02:09:02
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : Baseline@L5.0
Format settings, CABAC : No
Format settings, ReFrames : 1 frame
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 13mn 2s
Bit rate mode : Variable
Bit rate : 42.2 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Original height : 1 088 pixels
Display aspect ratio : 16:9
Original display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 29.970 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.679
Stream size : 3.85 GiB (96%)
Language : English
Encoded date : UTC 2010-12-20 02:09:02
Tagged date : UTC 2010-12-20 02:09:02
Color primaries : BT.709-5, BT.1361, IEC 61966-2-4, SMPTE RP177
Transfer characteristics : BT.709-5, BT.1361
Matrix coefficients : BT.601-6 525, BT.1358 525, BT.1700 NTSC, SMPTE 170M
Audio
ID : 2
Format : PCM
Format settings, Endianness : Little
Format settings, Sign : Signed
Codec ID : sowt
Duration : 13mn 2s
Bit rate mode : Constant
Bit rate : 1 536 Kbps
Channel(s) : 2 channels
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Stream size : 143 MiB (4%)
Language : English
Encoded date : UTC 2010-12-20 02:09:02
Tagged date : UTC 2010-12-20 02:09:02
Off topic (amiga) what about reading the amiga floppies? I have prolly a 1000 games/floppys... if they're still any good - been on the shelf in the garage.
My .m2ts specs. (Actually these vids are from my daughters camera - so not as imporant as my vidoes)
General
ID : 0
Complete name : F:\My Videos\Easton\20101210_210914.m2ts
Format : BDAV
Format/Info : Blu-ray Video
File size : 251 MiB
Duration : 2mn 18s
Overall bit rate : 15.2 Mbps
Maximum Overall bit rate : 18.0 Mbps
Video
ID : 4113 (0x1011)
Menu ID : 1 (0x1)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4.0
Format settings, CABAC : No
Format settings, ReFrames : 1 frame
Frame mode : Frame doubling
Codec ID : 27
Duration : 2mn 18s
Bit rate mode : Variable
Bit rate : 14.4 Mbps
Maximum bit rate : 16.6 Mbps
Width : 1 280 pixels
Height : 720 pixels
Display aspect ratio : 16:9
Frame rate : 29.970 fps
Standard : NTSC
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.520
Stream size : 237 MiB (95%)
Audio
ID : 4352 (0x1100)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Codec ID : 129
Duration : 2mn 18s
Bit rate mode : Constant
Bit rate : 192 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Stream size : 3.17 MiB (1%)
My .movs (From Canon 5DMkII
General
Complete name : F:\My Videos\Studio video\trad-senior\MVI_2154.QT
Format : MPEG-4
Format profile : QuickTime
Codec ID : qt
File size : 3.99 GiB
Duration : 13mn 2s
Overall bit rate : 43.8 Mbps
Encoded date : UTC 2010-12-20 02:09:02
Tagged date : UTC 2010-12-20 02:09:02
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : Baseline@L5.0
Format settings, CABAC : No
Format settings, ReFrames : 1 frame
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 13mn 2s
Bit rate mode : Variable
Bit rate : 42.2 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Original height : 1 088 pixels
Display aspect ratio : 16:9
Original display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 29.970 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.679
Stream size : 3.85 GiB (96%)
Language : English
Encoded date : UTC 2010-12-20 02:09:02
Tagged date : UTC 2010-12-20 02:09:02
Color primaries : BT.709-5, BT.1361, IEC 61966-2-4, SMPTE RP177
Transfer characteristics : BT.709-5, BT.1361
Matrix coefficients : BT.601-6 525, BT.1358 525, BT.1700 NTSC, SMPTE 170M
Audio
ID : 2
Format : PCM
Format settings, Endianness : Little
Format settings, Sign : Signed
Codec ID : sowt
Duration : 13mn 2s
Bit rate mode : Constant
Bit rate : 1 536 Kbps
Channel(s) : 2 channels
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Stream size : 143 MiB (4%)
Language : English
Encoded date : UTC 2010-12-20 02:09:02
Tagged date : UTC 2010-12-20 02:09:02
- Thread starter
- #2,229
Re: SAF v5.00 experimental (based on FFDShow DXVA decoder)
rojoyinc:
Well, it is up to you what you will do with floppies, i doubt you will ever touch them
Did you tryed disable DxVA as i describe ?
Can you post small MOV sample?
rojoyinc:
Well, it is up to you what you will do with floppies, i doubt you will ever touch them
Did you tryed disable DxVA as i describe ?
Can you post small MOV sample?
Re: SAF v5.00 experimental (based on FFDShow DXVA decoder)
clicked DXVA OFF
in ffdshow config
Untoggled.
Sound of .mov (.QT) is ok, video plays but keeps pausing (speed typically isn't any issue with these on this machine).
My .m2ts files now play.
Toggling those options again... turning on DXVA
trying same files.
oops - m2ts - crashed MP again.
restarting to try .QT file
audio works - Video very jerky.
Once again confirming.
clicking DXVA OFF
ffdshow - DXVA conf - toggling off H264 and CV1
Re-starting Mp - trying same 2 files.
(what will I lose by turning those off?)
my .QT same (audio fine, video sticks every couple seconds.
.m2ts work fine. (so leave those off?)
So last problems - .mov play fine (audio garbeled)
rename to .QT audio is fine, but video stutters.
FLOPPIES (well my point was) I've had emulators before - and well - never could use them, because how do we get the program off the amiga format floppy to PC?
Well - no worries as I don't plan to try. (Rather outdated those games). ;-)
clicked DXVA OFF
in ffdshow config
Untoggled.
Sound of .mov (.QT) is ok, video plays but keeps pausing (speed typically isn't any issue with these on this machine).
My .m2ts files now play.
Toggling those options again... turning on DXVA
trying same files.
oops - m2ts - crashed MP again.
restarting to try .QT file
audio works - Video very jerky.
Once again confirming.
clicking DXVA OFF
ffdshow - DXVA conf - toggling off H264 and CV1
Re-starting Mp - trying same 2 files.
(what will I lose by turning those off?)
my .QT same (audio fine, video sticks every couple seconds.
.m2ts work fine. (so leave those off?)
So last problems - .mov play fine (audio garbeled)
rename to .QT audio is fine, but video stutters.
FLOPPIES (well my point was) I've had emulators before - and well - never could use them, because how do we get the program off the amiga format floppy to PC?
Well - no worries as I don't plan to try. (Rather outdated those games). ;-)