Codecs SAF v6 (based on LAVF) (3 Viewers)

[matpe]

Re: SAF v6.00 (based on LAVF)

i know it has nothing to do with...it's just i bought Panasonics PT-AE2000E 1080p projector, and i would like to watch my movies/series in 24P. when i set it true MPC-HC the videa and audio are not in sync. Audio is before video for maybe 100-200 ms. If i run same video in MePo, video and audio are in sync but video playback is kind of jerky. like there is frame drop every sec or two??? Any Idea. i have onlySAF6 installed on my PC. and MePo and everything is set like tutorial on the first page of this thread.....

I have the same CPU in my htpc, not overclocked, and i also had a ATI 5770 before i swapped it for a Nvidia GTS450. Have you tried to use the LavVideo decoder, it worked great with my system, but for DVD i have Microsoft DTV-DVD Video Decoder.
Also in LavAudio you can enable audio delay.
And in MP i use Dynamic Refresh Rate Control.

 

[niels37]

Re: SAF v6.00 (based on LAVF)

Can someone please tell me how to get sound through spdif when i want to play a mpr or flac etc etc, because i don;t get no sound no more since i installed SAF 6. everything is configured like the first page of this forum of SAF

Video bluray dvd .....all plays just fine even iso bluray . Unfortunally i can't get no sound no more.


AAC decoder is lav because i can;t choose monogram ( as stated in the first post)

BTW : mp3 and flac is played by mepo just no sound on my receiver.

Looked everywhere in mepo but don't know what to do anymore.
Who wants to be so kind to make me smile and listen to some faboulous music again ;-)
gr Niels37


SOLUTION !!!!

Thx to HOLZI!!

Open MePo in window mode -> Play a MP3 file -> Open volume mixer in windows taskbar

See Screenshot:

 

[sk280]

Re: SAF v6.00 (based on LAVF)

Hello Everyone, Am confused, how do I obtain an unlock code for SAF v6 ?? I have searched this thead but the only references I could find, I'd have to PM the author?

If anyone could reply/PM, I'd really appreciate it, THANKS.

 

[niels37]

Re: SAF v6.00 (based on LAVF)

Hello Everyone, Am confused, how do I obtain an unlock code for SAF v6 ?? I have searched this thead but the only references I could find, I'd have to PM the author?

If anyone could reply/PM, I'd really appreciate it, THANKS.

Yep you have to PM Hoborg ( see first thread, or somewhere else ofcourse) and ask for unlocked saf. Hoborg will explain what to do. Some files u have to place somewhere in MP directory.

gr Niels37

 

[Jay_UK]

Re: SAF v6.00 (based on LAVF)

Hi guys,

I am running SAF6 but using FFDshow audio (spdif output)

I have an MKV that does not want to play (tried it in GS and MePo - neither work)

VLC plays it fine.

Mediainfo reports:

Format : Matroska
Format version : Version 2
File size : 8.06 GiB
Duration : 1h 51mn
Overall bit rate : 10.3 Mbps
Writing application : Lavf51.12.1
Writing library : Lavf51.12.1

Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : Main@L5.0
Format settings, CABAC : Yes
Format settings, ReFrames : 5 frames
Format settings, GOP : M=1, N=12
Codec ID : V_MPEG4/ISO/AVC
Duration : 1h 51mn
Bit rate : 9 799 Kbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Variable
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.197
Stream size : 7.65 GiB (95%)
Language : English

Audio
ID : 2
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Codec ID : A_AC3
Duration : 1h 51mn
Bit rate mode : Constant
Bit rate : 320 Kbps
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 44.1 KHz
Bit depth : 16 bits
Compression mode : Lossy
Stream size : 256 MiB (3%)
Language : English / English

GS reports LAV splitter, ffdshow DXVA with ffdshow audio.

If I disable DXVA (and just use standard ffdshow video) it still does not play.

When I enabled AC3 encode (spdif out) in ffdshow audio to see if that fixes it. This then changes the audio codec to MPC/MPA decoder, which allows the movie to play, but with bad results (see attached).

Anyone got any ideas?

Thanks,

J.

 

[mr viggo]

Re: SAF v6.00 (based on LAVF)

hoborg

Is it possible to create .reg files depending on pass-through settings in LAVaudio? Ffdshow made it easy with a export button but can it be done with LAV with a little trick? I have the reg files in ffdshow mapped to button on my remote so I can easily merge them when changing between output to tv/avr.

Like to have the possibility to it with LAV also.

Thanks

 

[Henric-a]

Re: SAF v6.00 (based on LAVF)

Look at post 1336

 

[trisavolo]

Re: SAF v6.00 (based on LAVF)

Hi Henric-a,
thank you so much!
I read your post yesterday and tried the "reg file".

But....I have a problem with DTS S/PDIF.
If I change AudioRender (HDMI to S/PDIF) once I get stereo sound in my amp.
If I make the change a second time (S/PDIF to HDMI and then HDMI to S/PDIF) the DTS LED amplifier begins to flash en the sound is scratched.
I also tried to delete the W7_reg_key posted by hoborg (#1335) but do not solve anything.

Have u got any suggestions?

 

[doveman]

Re: SAF v6.00 (based on LAVF)

I don't have a receiver but just use the outputs on my soundcard for 5.1.

Is there a way to use my remote to switch between profiles in ffdshow, one that mixes everything down to stereo for when I don't want to use my extra speakers, and one which will output to all my speakers?

 

[trisavolo]

Re: SAF v6.00 (based on LAVF)

Hi doveman,
look at ARC plugin #98
Bye .