Codecs SAF v6 (based on LAVF) (1 Viewer)

[hoborg]

Re: SAF v6.00 (based on LAVF)

@wisdom:
That is becouse Cyberlink from ulocked SAF is using DXVA to decode video.
You can try to disable it ftom START-SAF-PDVD-disable DXVA.

 

[hoborg]

Re: SAF v6.00 (based on LAVF)

The problem is, that your file is not .DTS, it is DTS in WAV container...
If you add LAV audio decoder to MePo postprocessing, it should be working.
Hope there will be better solution soon.

where can i set audio postprocessing in MePo???

Good news, i was able to make it working correctly even on Win7 (it was working correctly on XP).
It will be supported in next SAF.
Right now i lost my PaquetBuilder registration (it is software where SAF is compiled) due i was fired from work (after 10 years!) - replaced by cheaper and completelly unexperienced person :/

 

[niels37]

Re: SAF v6.00 (based on LAVF)

Hi,
Can someone help me out ?

i use mepo 1.2.1 bluray handler ( latest) and SAF 6

I finally can play iso through damontools in Mepo including Bluray thx to bluray handler plugin.

Sound passthrough ( standard saf install) works great with almost everything..............

Bluray sound isn't working.

Is there something i have to do with configuration codecs ? Since i have no sound at all.


Thx in advance

Hi there,

While playing the Bluray through MePo, load up Graphstudio, and post the screen capture of what it is saying, along with the MePo logs (while in debug mode)

J.

Hi Jay,

thanks for your reaction.

It took me a while to get the logs and it took even longer to get graphstudio to let see something. Hope it is what you asked for.

Mediaportal debug modus............created logs
graphstudio started after i started mepo within windowed screen, without mepo constantly "keep on top" playing bluray...........graphstudio remote , then something happend........see screendump en MP logs.

Hope you can see something within these files i attached.

 

[Jay_UK]

Re: SAF v6.00 (based on LAVF)

Hi there,

The graph looks ok - all pins connected ok.

The log shows this:

2011-10-25 19:37:22.781061 [Debug][MPMain(1)]: VideoPlayer: FoundStreams: Type=Unknown; Name=A: English [eng] (dts, 48000 Hz, 5.1, 1536 kb/s), Filter=ffdshow DXVA Video Decoder, Id=0, PDWGroup=1, LCID=1033
2011-10-25 19:37:22.781061 [Debug][MPMain(1)]: VideoPlayer: FoundStreams: Type=Unknown; Name=S: Dutch [nld] (pgs), Filter=ffdshow DXVA Video Decoder, Id=1, PDWGroup=2, LCID=1043
2011-10-25 19:37:22.781061 [Debug][MPMain(1)]: VideoPlayer: FoundStreams: Type=Unknown; Name=S: English [eng] (pgs), Filter=ffdshow DXVA Video Decoder, Id=2, PDWGroup=2, LCID=1033
2011-10-25 19:37:22.781061 [Debug][MPMain(1)]: VideoPlayer: FoundStreams: Type=Unknown; Name=S: Forced Subtitles (auto), Filter=ffdshow DXVA Video Decoder, Id=3, PDWGroup=2, LCID=1033
2011-10-25 19:37:22.781061 [Debug][MPMain(1)]: VideoPlayer: FoundStreams: Type=Unknown; Name=S: No subtitles, Filter=ffdshow DXVA Video Decoder, Id=4, PDWGroup=2, LCID=-1
2011-10-25 19:37:22.781061 [Debug][MPMain(1)]: VideoPlayer: FoundStreams: Type=Video; Name=V: h264 high L4.1, yuv420p, 1920x1080, Filter=LAV Splitter Source, Id=0, PDWGroup=0, LCID=0
2011-10-25 19:37:22.781061 [Debug][MPMain(1)]: VideoPlayer: FoundStreams: Type=Audio; Name=A: English [eng] (dts, 48000 Hz, 5.1, 1536 kb/s), Filter=LAV Splitter Source, Id=1, PDWGroup=1, LCID=1033
2011-10-25 19:37:22.782061 [Debug][MPMain(1)]: VideoPlayer: FoundStreams: Type=Subtitle; Name=S: Dutch [nld] (pgs), Filter=LAV Splitter Source, Id=2, PDWGroup=2, LCID=1043
2011-10-25 19:37:22.782061 [Debug][MPMain(1)]: VideoPlayer: FoundStreams: Type=Subtitle; Name=S: English [eng] (pgs), Filter=LAV Splitter Source, Id=3, PDWGroup=2, LCID=1033
2011-10-25 19:37:22.782061 [Debug][MPMain(1)]: VideoPlayer: FoundStreams: Type=Subtitle; Name=S: Forced Subtitles (auto), Filter=LAV Splitter Source, Id=4, PDWGroup=2, LCID=1033
2011-10-25 19:37:22.782061 [Debug][MPMain(1)]: VideoPlayer: FoundStreams: Type=Subtitle_hidden; Name=S: No subtitles, Filter=LAV Splitter Source, Id=5, PDWGroup=2, LCID=-1

There are a few unkown streams - might not be the issue though.

Can you do a mediainfo on the file. Looks like the audio should be: dts, 48000 Hz, 5.1, 1536 kb/s

Check the input and output on the LAV audio decoder.

J.

 

[Perril]

Re: SAF v6.00 (based on LAVF)

Hi there! Thx for everything! =D Working great, been using some of the saf's for a while now.
But to day i tried to play a movie.. i got ann error... (my first on a LONG time.. i must be lucky.. )

It says: "Cant play nameofmovie.mkv" "Video codec: AVC" Audio codec: AAC VERSION 4 LC"

gues im missing a codec or something... but i dont what to install anything else.. im afraid to f up MP and SAF


Any suggestions on what to do? And how do i make ann "error log"...

 

[hoborg]

Re: SAF v6.00 (based on LAVF)

Hi there! Thx for everything! =D Working great, been using some of the saf's for a while now.
But to day i tried to play a movie.. i got ann error... (my first on a LONG time.. i must be lucky.. )

It says: "Cant play nameofmovie.mkv" "Video codec: AVC" Audio codec: AAC VERSION 4 LC"

gues im missing a codec or something... but i dont what to install anything else.. im afraid to f up MP and SAF


Any suggestions on what to do? And how do i make ann "error log"...

Did you try to play it directly in graphstudio?

 

[mylle]

Re: SAF v6.00 (based on LAVF)

Right now i lost my PaquetBuilder registration (it is software where SAF is compiled) due i was fired from work (after 10 years!) - replaced by cheaper and completelly unexperienced person :/

Sorry to hear that!

Thanks for your great work on SAF.

Regards
Jacob

 

[wisdom]

Re: SAF v6.00 (based on LAVF)

@wisdom:
That is becouse Cyberlink from ulocked SAF is using DXVA to decode video.
You can try to disable it ftom START-SAF-PDVD-disable DXVA.

Thanks, it helped!

 

[Paranoid Delusion]

Re: SAF v6.00 (based on LAVF)

Right now i lost my PaquetBuilder registration (it is software where SAF is compiled) due i was fired from work (after 10 years!) - replaced by cheaper and completelly unexperienced person :/

Sorry to here that, hope you are back working soon.

Regards

 

[Perril]

Re: SAF v6.00 (based on LAVF)

Hi there! Thx for everything! =D Working great, been using some of the saf's for a while now.
But to day i tried to play a movie.. i got ann error... (my first on a LONG time.. i must be lucky.. )

It says: "Cant play nameofmovie.mkv" "Video codec: AVC" Audio codec: AAC VERSION 4 LC"

gues im missing a codec or something... but i dont what to install anything else.. im afraid to f up MP and SAF


Any suggestions on what to do? And how do i make ann "error log"...

Did you try to play it directly in graphstudio?

It worked in grapstudio.... hmm..


EDIT: Think i found some of the problem MP was outdated.. was runing a beta.. lol
I'll edit this post if i still have the same error after the update