- December 26, 2006
- 6
- 0
- Home Country
-
New Zealand
hi, I am having problems with the setup wizard. When I start it up and get to the scan for channels step, it crashes. What can I do? Please help
setup wizard does'nt work (1 Viewer)
- Thread starter norton_bsa
- Start date
Hi,
If this is the "first time wizard" just skip all configuration & scanning & use MP Setup to do all that.
You haven't said what version you use or what your computer specs are, that will tell us some more...............
Regards
Roy
If this is the "first time wizard" just skip all configuration & scanning & use MP Setup to do all that.
You haven't said what version you use or what your computer specs are, that will tell us some more...............
Regards
Roy
- December 26, 2006
- 6
- 0
- Home Country
-
New Zealand
- Thread starter
- #3
how would I do that?
Hi,
You use the next -> next until it's finished, if you get a windows error just move it out of the way & don't close it before you're finish with the wizard. This will create the necessary file to continue with MP Setup later...
Regards
Roy
You use the next -> next until it's finished, if you get a windows error just move it out of the way & don't close it before you're finish with the wizard. This will create the necessary file to continue with MP Setup later...
Regards
Roy
- December 26, 2006
- 6
- 0
- Home Country
-
New Zealand
- Thread starter
- #5
These are my computer specs. THe verision of MP i am usings is 2.2
b]MediaPortal Version[/b]:2.2
MediaPortal Skin:
Windows Version:Windows XP
CPU Type:
HDD:160 gb 7200rpm serial ata hard drive
Memory: 512MB 400MHZ DDR SDRAM
Motherboard:
Motherboard Chipset:
Motherboard Bios:
Video Card:
Video Card Driver:
Sound Card: intel high definition 7.1 audio dolby digital surround sound ready
Sound Card AC3:
Sound Card Driver:
1. TV Card:skystar2
1. TV Card Type:
1. TV Card Driver:
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
Satelite/CableTV Provider:
HTPC Case:
Cooling:
Power Supply:
Remote:
TV:
TV - HTPC Connection:
Sorry for the lack of details, I dont undertand alot of this so I have left out afew fields.
Thanks for the help
Patrick
b]MediaPortal Version[/b]:2.2
MediaPortal Skin:
Windows Version:Windows XP
CPU Type:
HDD:160 gb 7200rpm serial ata hard drive
Memory: 512MB 400MHZ DDR SDRAM
Motherboard:
Motherboard Chipset:
Motherboard Bios:
Video Card:
Video Card Driver:
Sound Card: intel high definition 7.1 audio dolby digital surround sound ready
Sound Card AC3:
Sound Card Driver:
1. TV Card:skystar2
1. TV Card Type:
1. TV Card Driver:
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
Satelite/CableTV Provider:
HTPC Case:
Cooling:
Power Supply:
Remote:
TV:
TV - HTPC Connection:
Sorry for the lack of details, I dont undertand alot of this so I have left out afew fields.
Thanks for the help
Patrick
Users who are viewing this thread
Similar threads
Thankyou High_Five, that worked perfectly, I now remember doing that 10 years ago, thanks for jogging my old memory. Cheers Tony
Thankyou High_Five, that worked perfectly, I now remember doing that 10 years ago, thanks for jogging my old memory. Cheers Tony
Hi everyone,
I have been using it For 16 years now (from V1.1.1) and it has worked flawlessly.
I only use TV Series and Moving...
Can anyone tell me the step-by-step procedure for bringing up a second channel in pip mode? I can only do it sometimes, after many tries, and it’s not clear what I am doing that makes it work on those occasions when it does. Cannot find guidance on the site.
Thanks, N.
Again, if anyone knows how to do this, would be much...
Can anyone tell me the step-by-step procedure for bringing up a second channel in pip mode? I can only do it sometimes, after many...
Can anyone tell me the step-by-step procedure for bringing up a second channel in pip mode? I can only do it sometimes, after many...
<MariaDB10>
<URL>https://install.team-mediaportal.com/MariaDB_10</URL>
<FILE>mariadb-10.11.8-winx64.msi</FILE>
<TYPE>Automatic</TYPE>
</MariaDB10>
Maria DB 10.11.8, base version 10.0, in the log file (a piece of which is above) it is displayed - MariaDB 10.11 (x64) - MariaDB 10.0
Property(S)...
<MariaDB10>
<URL>https://install.team-mediaportal.com/MariaDB_10</URL>
<FILE>mariadb-10.11.8-winx64.msi</FILE>...
See the attached screenshot. This problem ocurred when I attempted an update install from MP 1.36 x64, which had previously been...
Fixed, I think.
Certainly the vintage MP2 installer that I was using no longer installs the LAV filters. I can only assume that these were never part of the install package itself, but rather downloaded during the install, and that link no longer exists. Shame that the installer doesn't indicate this.
Last time when I installed the...
Fixed, I think.
Certainly the vintage MP2 installer that I was using no longer installs the LAV filters. I can only assume that...
Hi all,
I've recently retired my MP2 setup for my main HTPC and gone back to separates, but I wanted to retain the ability to play...
MP1
MP2
1.38
Running TVService as "NT Service\TVService" or "Local Service" not working anymore since Windows September 2025 updates
DE
Reading through your code, I can see it's more than a couple steps above my paygrade. :cry:
Reading through your code, I can see it's more than a couple steps above my paygrade. :cry:
I used to run the TVService under the "NT Service\TVService" account to follow least privileges principal (not exposing my whole...
