[solved] Install 0.2RC2 => PVR2000 no signal (HW) (1 Viewer)

Olvin

Portal Member
January 22, 2006
7
0
Hello,

I have installed Media Portal 0.2RC2, but now my TV Tuner card (Leadtek Winfast PVR2000) is not working anymore... => no signal (no sound and no picture).
And I had no problem with version 0.1.3...
I have the last drivers from Leadtek and I have no problem with Ktv (except when I run MediaPortal first => Ktv is not responding...)
The graph from graphedit seems to be correct...
I have try more than one solution from this forum but nothing can resolve the problem...

Here is the end of capture.log :

21/01/2006 1:19:25 SinkGraph:TuneChannel() tune to channel:22 country:0 standard:None name:TF1
21/01/2006 1:19:25 SinkGraph:TuneChannel() tuningspace:0 country:0 tv standard:None cable:False
21/01/2006 1:19:26 SinkGraph:TuneChannel() tuned to channel:22 county:32 freq:479,25 MHz. tvformat:pAL_B signal:NoSignal
21/01/2006 1:19:26 mpeg2:add Videoanalyzer
21/01/2006 1:19:26 mpeg2:add streambuffersink
21/01/2006 1:19:26 mpeg2:confused:tartTimeshifting(C:\Documents and Settings\ovincent\Mes documents\My Recordings\card1\live.tv)
21/01/2006 1:19:26 mpeg2:render graph
21/01/2006 1:19:26 mpeg2:render to :C:\Documents and Settings\ovincent\Mes documents\My Recordings\card1\live.tv
21/01/2006 1:19:26 mpeg2:connect demux video out->analyzer in
21/01/2006 1:19:26 mpeg2:demux video out connected to analyzer
21/01/2006 1:19:26 mpeg2:analyzer out->stream buffer
21/01/2006 1:19:26 mpeg2:connected to streambuffer
21/01/2006 1:19:26 mpeg2:demux audio out->stream buffer
21/01/2006 1:19:26 mpeg2:audio out connected to streambuffer
21/01/2006 1:19:26 mpeg2:confused:et folder:C:\Documents and Settings\ovincent\Mes documents\My Recordings\card1 filecount 6-8, fileduration:300 sec
21/01/2006 1:19:26 mpeg2:lock profile
21/01/2006 1:19:26 mpeg2: mediactl started

And a part of the MediaPortal.log :

21/01/2006 1:19:24 VideoCaptureDevice: found output pin
21/01/2006 1:19:24 VideoCaptureDevice:get Video stream control interface (IAMStreamConfig)
21/01/2006 1:19:24 VideoCaptureDevice:got IAMStreamConfig for Capture
21/01/2006 1:19:24 SWGraph:capture FrameRate set to 25
21/01/2006 1:19:24 VideoCaptureDevice: capture FrameRate done :25
21/01/2006 1:19:24 VideoCaptureDevice:FAILED:could not set capture Framesize to 720x576!
21/01/2006 1:19:24 SinkGraphEx: Capturing:720x576
21/01/2006 1:19:24 mpeg2:add new MPEG2 Demultiplexer to graph
21/01/2006 1:19:24 mpeg2:create video out pin on MPEG2 demuxer
21/01/2006 1:19:24 mpeg2:create audio out pin on MPEG2 demuxer
21/01/2006 1:19:24 mpeg2:find MPEG2 demuxer input pin
21/01/2006 1:19:24 mpeg2:found MPEG2 demuxer input pin
21/01/2006 1:19:25 mpeg2:MPEG2 demuxer map MPG stream 0xe0->video output pin
21/01/2006 1:19:25 mpeg2:mapped MPEG2 demuxer stream 0xe0->video output
21/01/2006 1:19:25 mpeg2:MPEG2 demuxer map MPG stream 0xc0->audio output pin
21/01/2006 1:19:25 mpeg2:mapped MPEG2 demuxer stream 0xc0->audio output
21/01/2006 1:19:25 SinkGraphEx:CreateGraph() OUT
21/01/2006 1:19:25 GetFilterByName: Kernel Tee, Smart Tee
21/01/2006 1:19:25 GetFilterByName: Kernel Tee, MPEG-2 Demultiplexer
21/01/2006 1:19:25 GetFilterByName: Kernel Tee, WinFast PVR2000 MPEG Encoder
21/01/2006 1:19:25 GetFilterByName: Kernel Tee, WinFast PVR2000 WDM Video Capture
21/01/2006 1:19:25 GetFilterByName: Kernel Tee, WinFast PVR2000 WDM Crossbar
21/01/2006 1:19:25 GetFilterByName: Kernel Tee, WinFast PVR2000 WDM TvAudio
21/01/2006 1:19:25 GetFilterByName: Kernel Tee, WinFast PVR2000 WDM Tuner
21/01/2006 1:19:25 SinkGraph:confused:tartTimeShifting()
21/01/2006 1:19:25 SinkGraph:TuneChannel() tune to channel:22 country:0 standard:None name:TF1
21/01/2006 1:19:25 SinkGraph:TuneChannel() tuningspace:0 country:0 tv standard:None cable:False
21/01/2006 1:19:26 SinkGraph:TuneChannel() tuned to channel:22 county:32 freq:479,25 MHz. tvformat:pAL_B signal:NoSignal
21/01/2006 1:19:26 FixCrossbarRouting: use tuner:True use cvbs#1:False use cvbs#2:False use svhs:False use rgb:False
21/01/2006 1:19:26 Find crossbar:#1
21/01/2006 1:19:26 crossbar found:1
21/01/2006 1:19:26 crossbar has 5 inputs and 2 outputs
21/01/2006 1:19:26 check:in#0->out#0 / Video_Tuner -> Video_VideoDecoder
21/01/2006 1:19:26 connect
21/01/2006 1:19:26 connect success
21/01/2006 1:19:26 check:in#1->out#0 / Video_SVideo -> Video_VideoDecoder
21/01/2006 1:19:26 check:in#2->out#0 / Video_Composite -> Video_VideoDecoder
21/01/2006 1:19:26 check:in#3->out#1 / Audio_Tuner -> Audio_AudioDecoder
21/01/2006 1:19:26 connect
21/01/2006 1:19:26 connect success
21/01/2006 1:19:26 check:in#4->out#1 / Audio_Line -> Audio_AudioDecoder
21/01/2006 1:19:26 Find crossbar:#2
21/01/2006 1:19:26 no more crossbars.:0x80004005
21/01/2006 1:19:26 crossbar routing done
21/01/2006 1:19:26 mpeg2:add Videoanalyzer
21/01/2006 1:19:26 mpeg2:add streambuffersink

Somebody has an idea ?

Thanks.

Olivier
 

guytpetj

MP Donator
  • Premium Supporter
  • March 24, 2005
    424
    57
    58
    USA
    Home Country
    United States of America United States of America
    I had the same problem, fixed it by copying the 0.1.3.0 CaptureCardDefinitions.xml file in the 0.2.0 MP folder.
    Unfortunately have to do this every time I load a new 0.2.0 CVS.
     

    Olvin

    Portal Member
    January 22, 2006
    7
    0
    I've tried your solution, but when I do this, I can't add the capture card in the configuration of Media Portal. I've the message : "No video capture card(s) were found, you won't be able to configure a capture card".

    Before erasing the CaptureCardDefinitions.xml, your 0.2RC2 version was install on a 0.1.3 version or have you uninstall the previous version and delete the Media Portal directory before installing the 0.2RC2 version ?

    Thanks,

    Olivier
     

    guytpetj

    MP Donator
  • Premium Supporter
  • March 24, 2005
    424
    57
    58
    USA
    Home Country
    United States of America United States of America
    I backed-up my MP 0.1.3.0 folder and then uninstalled MP 0.1.3.0, deleted the MediaPortal folder, and started from scratch with MP 0.2.0 RC2.

    Hope this works for you, it sure did work for me.
     

    Olvin

    Portal Member
    January 22, 2006
    7
    0
    Finally, I think that there is something strange in the Graph from Graphedit.

    You can see here :
    http://www.olvin.be/divers/mpgraph.jpg

    I think that the presence of the filter "Smart Tee" is not normal and that it is blocking the output of the card...
    But if I remove it manually, nothing changes...

    I must also tell you that the devid of my card is this one :

    ven_14f1&dev_8800&subsys_6630107d&rev_05

    and not this one :

    ven_14f1&dev_8800&subsys_663c107d&rev_05

    Note the difference : 6630107 instead of 663c107


    So, for my problem, is there a bug in the version 0.2RC2 or must I change something to make it working ?!?
     

    dman_lfc

    Retired Team Member
  • Premium Supporter
  • July 28, 2004
    1,772
    30
    UK
    Home Country
    New Zealand New Zealand
    Olvin,

    Upgrade to CVS
    And re-try

    Note: Your variant of card was added a few weeks ago.

    DMAN
     

    Olvin

    Portal Member
    January 22, 2006
    7
    0
    I have already tried with the last CVS of 01/26/2006 (not this of 01/27/2006, i will try this evening).
     

    Olvin

    Portal Member
    January 22, 2006
    7
    0
    Ok, now it's working !

    I have installed the CVS of 01-28-2006
    and I have also re-installed .Net Framework 2.0

    So, i'm not sure that it's the CVS or the re-install of the framework that solves the problem...
     

    dane1234

    New Member
    January 29, 2006
    2
    0
    Winfast PVR2000

    I have same problem.
    And sorry but i am quite new here, what is that CVS you ref. to?

    Best regards

    Dane1234
     

    Olvin

    Portal Member
    January 22, 2006
    7
    0
    CVS is new updates for Media Portal.
    In fact, you replaces directly files in the directory "Program Files\Team Media Portal\Media Portal".

    You can download CVS here :
    https://www.team-mediaportal.de
    Go to "CVS-download" on the right

    I must also tell you that I have re-install a new version of .Net framework 2.0 (01/22/2006)
     

    Users who are viewing this thread

    Top Bottom