Status of Twinhan CI support (1 Viewer)

[dman_lfc]

Please post your working or non-working MediaPortal Twinhan CI configurations for others to see...

also please tell us if the CAM is working with MyTheathre or other apps

An Example:

Status: Not Working
Card Type: DVB-S (1030)
Card Driver: 1.2.3.4
CAM: Dragon CAM v4.01
CAM Firmware: Predator 320
DVB Provider: Foxtel
FTA: YES
Scrambled: NO

Works with MyTheatre using WDM drivers...

Note: This is not a discussion thread but a quick snapshot for users to see what works or does not.

Official status for my tests...

Status: Not Working
Card Type: DVB-S (1032A)
Card Driver: 1.2.3.8
CAM: Dragon CAM v4.01
CAM Firmware: Predator 352
DVB Provider: SKY UK
FTA: YES
Scrambled: NO

Status: Working
Card Type: DVB-S (1032A)
Card Driver: 1.2.3.8
CAM: Viaccess
CAM Firmware: 4.84
DVB Provider: Arabesque
FTA: YES
Scrambled: YES

DMAN

 

[moremetall]

Status: Working in MP
CAM:Aston DVB CI Module DVB
Platform: EuroCAM
Application: 1.0400B
Viaccess Version: V 483
Hardware: P/N HW 1.0
DVB number: 2557
Provider: BOXER

Works in Mytheatre as well

 

[Chimen]

Status: Working in MediaPortal 0.1.3 final
CAM: SCM Microsystem
Platform: EuroCAM
Application: V 1.08
Viaccess Version: V 483
Hardware: P/N 904240 Rev 1.0
DVB number: 2297
Provider: BOXER

Works in Mytheatre as well.

 

[fjonson]

Status: Working
CAM: SCM Microsystem
Platform: CONAX
Hardware: P/N 904180 Rev 1.0
Provider: CANAL DIGITAL

Works nice with MediaPortal 1.3.0 but it works best with CVS build after 0801.

Where is some issues probably because of the cvs build.
First off all Swedish television channel 1 & 2 are sending sound Both AC3 and normal sound. But if you don’t remove the AC3 pid from the channel list where is no sound.
Second. Discovery Channel has no sound at all. All pid’s are correct and there is no additional information in the logs.
Third. Disney channel have 4 languages mediaportal only prepared for 3. But there is one more problem with this channel. Even if I remove all pid except the Swedish one I only get Danish language. Locking into the logs every thing locks fine until the sound pid is transmitted it’s the throng one. There do mediaportal get the pid information, I have removed all language pid’s except the Swedish one.

 

[lout]

Working but wrong audio

Status: Working but wrong audio 1030A
CAM: CA modul X-cam
Platform: Cryptoworks
Provider: UPC Direct

i have picture ok but audio its wrong languange if i try to chnge in mp nothing
happens if i change pids in setup noting happens...
MediaPortal 1.3.0
Plz help me how to change audio thnx

X-CAM modul on 1030A work ok with software from Twinhan !!!

 

[trannel]

Status: Working
Card: Twinhan Cab CI, model 20310
Type: DVB-C
CAM: SCM Microsystem
Platform: CONAX
CAM Hardware: P/N 904180 Rev 1.0
Provider: Comhem

Driver veriosn 1.2.3.8.

Its working OK, but i can't get same framerate trough my computer as if i use the Humax box. It's very annoying now in World Cup times

/Trannel

 

[KRA]

Status: Working almost.. MP 0.1.3 Final
Card Type: DVB-S (1030a)
CAM: CONAX CAM v4.0
DVB Provider: Canal Digital Norway

It is working, I can watch most channels, Some channels are not working.
Those channels that are working, seem to work just fine, however the HD channel isn't perfect, it's jerking, have some artifacts and cause tearing, even thoug the cpu usage is still only 80%. Some Channels don't have sound, this is most likely AC3 related, however this might be codec related, nvidia decoder seems to get a DD stream, but I hear nothing.

 

[maju]

DON'T FORGET THERE ARE BIG DIFFERENCES BETWEEN THE DIFFERENT TYPES OF TWINHAN CI CARDS!!!

CAM's like Matrix, Dragon, Joker, XCAM, etc will never work with the Twinhan CI cards with product code 1030x! These CAM's are only working with the newest release of the Twinhan CI card: 1032A!

SO PLEASE EXTEND YOUR CARD INFO WITH THE PRODUCT CODE OF YOUR CARD!

I know the 1032A is currently not available in many areas like central europe. To get a Twinhan 1032A in this area, you have to decide for a Twinhan OEM product like DigitalRise (sorry for the promo ...)

 

[maju]

Re: Twinhan CI Support

Status: Working
Card Type: DVB-S (1032A)
CAM: Matrix Revolutions
CAM Firmware: MREV 225
DVB Provider: all FTA and ...

 

[MGK]

My Example:

Status: Not Working
Card Type: DVB-T CI (3040)
CAM: SCM Microsystem EuroCam
CAM Firmware: Hardware: P/N 904240 Rev 1.0
DVB Provider: Boxer Sweden
FTA: ?
Scrambled: ?

Works fine with Twinhans software!! All "pay" channels works fine!!
But in MP I only recive this message "Unable to create graph for this device" when I try to add my Twinhan DVB-T CI card. Pleas help!
(MP 1.3.0 BDA 1.2.2.0)