Stream hangs & error (1 Viewer)

[kalon]

MediaPortal Version: 0200 + Latest SVN + TVE3 Latest SVN
Windows Version: XPPROSP2 Swedish
CPU Type: Intel 3ghz HT
HDD: Maxtor 300GB
Memory: 1gb DDR2
Motherboard: Asus
Motherboard Chipset: Intel 945P
Motherboard Bios:
Video Card: Nvidia 6600
Video Card Driver: Forceware 84.21
Sound Card: Cmedia
Sound Card AC3: Cmedia
Sound Card Driver: Cmedia
1. TV Card: FloppyDTV
1. TV Card Type: DVB-T
1. TV Card Driver: Latest
2. TV Card: Twinhan VP 3040
2. TV Card Type: DVB-T
2. TV Card Driver: Latest
MPEG2 Video Codec: Nvidia
MPEG2 Audio Codec: Nvidia
DVB-T Provider: Boxer
HTPC Case: Silverstone
Remote: MCE Europe
TV: FujitsuSiemens 46" LCD
TV - HTPC Connection: DVI
TVE3 installation - Client/server

If i erase the TS files and restart TVE3service & Client everything works fine.
But after a TV on/off and/or channelchange the stream hangs after a while and i get this in the error log:

2006-12-17 20:39:22 Exception ystem.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
at TvLibrary.Streaming.RtspStreaming.StreamRun()
at TvLibrary.Streaming.RtspStreaming.workerThread()
2006-12-17 20:39:22 Exception :Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
2006-12-17 20:39:22 site :Void StreamRun()
2006-12-17 20:39:22 source :TVLibrary
2006-12-17 20:39:22 stacktrace: at TvLibrary.Streaming.RtspStreaming.StreamRun()
at TvLibrary.Streaming.RtspStreaming.workerThread()

I have run memory test. Even a disktest. But have not find any errors. I'm not sure what the errorlog means either...

 

[arikzinger]

MediaPortal Version: 0200 + Latest SVN + TVE3 Latest SVN
Windows Version: XPPROSP2 Swedish
CPU Type: Intel 3ghz HT
HDD: Maxtor 300GB
Memory: 1gb DDR2
Motherboard: Asus
Motherboard Chipset: Intel 945P
Motherboard Bios:
Video Card: Nvidia 6600
Video Card Driver: Forceware 84.21
Sound Card: Cmedia
Sound Card AC3: Cmedia
Sound Card Driver: Cmedia
1. TV Card: FloppyDTV
1. TV Card Type: DVB-T
1. TV Card Driver: Latest
2. TV Card: Twinhan VP 3040
2. TV Card Type: DVB-T
2. TV Card Driver: Latest
MPEG2 Video Codec: Nvidia
MPEG2 Audio Codec: Nvidia
DVB-T Provider: Boxer
HTPC Case: Silverstone
Remote: MCE Europe
TV: FujitsuSiemens 46" LCD
TV - HTPC Connection: DVI
TVE3 installation - Client/server

If i erase the TS files and restart TVE3service & Client everything works fine.
But after a TV on/off and/or channelchange the stream hangs after a while and i get this in the error log:

2006-12-17 20:39:22 Exception ystem.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
at TvLibrary.Streaming.RtspStreaming.StreamRun()
at TvLibrary.Streaming.RtspStreaming.workerThread()
2006-12-17 20:39:22 Exception :Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
2006-12-17 20:39:22 site :Void StreamRun()
2006-12-17 20:39:22 source :TVLibrary
2006-12-17 20:39:22 stacktrace: at TvLibrary.Streaming.RtspStreaming.StreamRun()
at TvLibrary.Streaming.RtspStreaming.workerThread()

I have run memory test. Even a disktest. But have not find any errors. I'm not sure what the errorlog means either...

I experience the same.

 

[kalon]

i recon that there can be similar problems when low signal appears. I do have much different signal quality between channels. And I think that when the stream hangs its often on a channel with low signal.. I will try to point my antenna to a different direction...
However that does not explain the error in log.

 

[kalon]

Much better with latest SVN. But still sometimes stream hangs and client crashes.
New "fresh" logs attached
PS/ Only running on tv card at the moment: Twinhan VP 3040

 

[kalon]

Tried with TVE SVN 12419 now. No Error.
But after 5-6 channelchanges the streams hangs. But I can use the MPclient until I turn tv on/off in TVhome then the client also hangs and only way out is to kill Mediaportal process.
Running VLC "on the side" shows that the last channelchange hangs stream.
On SetupTV everything looks normal and the server seems to change channel correct...

 

[kalon]

Moved to TVE rev 12440
Got this Error again.
It seems that it comes when server is playing around with the ts files.
Attaching new logs..

 

[BKCH]

I get this error too :| I've seen it on various builds including today's...

 

[HappyTalk]

Mine hung a moment ago, then blue screened and rebooted

 

[jurien]

I also get this error. On the media portal server it runs without a problem, on a remote client it will crash after 10 to 15 minutes.