TBS: CI/CAM support and other improvements (1 Viewer)

Lapos

Lapos

Portal Member
January 9, 2014
27
3
Home Country
Czech Republic Czech Republic
Hello,
I have read this entire thread, I have a question please. Perhaps I tested all possible combinations, but this version does not decode the CI. More precisely, in combination:
- MP 1.6
- TBS6991 + CI
- CAM "Delta TWIN" module
- IRDETO card.

When testing with older HW
- MP 1.6
- SkyStar HD2 + CI
- "SkyStar CryptoWorks" module
- IRDETO card.
everything was OK.

I understand from the thread that has already been TVLibrary.dll adjustment is required in connection with TbsCIapi.dll. I'm sorry, but I had not a developer, but decoding technology I have not dealt much and just do it slowly permeate.

Has anyone tried the TBS6991 the last OFFICIAL version 1.6?

Thank you for any statements or guidance on another thread.
 
Lapos

Lapos

Portal Member
January 9, 2014
27
3
Home Country
Czech Republic Czech Republic
mm1352000 said:
Lapos said:
Has anyone tried the TBS6991 the last OFFICIAL version 1.6?
Click to expand...
It won't work unless you install the patch.
https://forum.team-mediaportal.com/...ther-improvements.103276/page-51#post-1051247
Click to expand...

Yes, I am done, and after I stopped updating DVB-S channels located. The signal shows correctly, but does not find any stations. I've tried almost all combinations in connection with drivers, but to no avail.
Obviously I'm doing something wrong, but I do not know where to look for.
 

Attachments

  • 1.jpg
    1.jpg
    304.8 KB
Last edited:
M

mm1352000

Retired Team Member
  • Premium Supporter
    • September 1, 2008
    21,577
    8,224
    Home Country
    New Zealand New Zealand
    Lapos said:
    Yes, I am done, and after I stopped updating DVB-S channels located. The signal shows correctly, but does not find any stations. I've tried almost all combinations in connection with drivers, but to no avail.
    Obviously I'm doing something wrong, but I do not know where to look for.
    Click to expand...
    It is possible that your CAM is not compatible with TBS CI slots. In any case, please:
    1. Set TV Server log level to debug: http://wiki.team-mediaportal.com/1_.../TV-Server_Configuration/06_General#Log_Level
    2. Restart the TV service ("manual control", "stop service"... then "start service").
    3. Perform a new scan for 10 transponders/frequencies then cancel.
    4. Use the watchdog/debug tool with option 3 to export all existing log files: http://wiki.team-mediaportal.com/1_..._Non_Reproducible_Problems_within_MediaPortal
    5. Post/attach the zip file here.
    mm
     
    Lapos

    Lapos

    Portal Member
    January 9, 2014
    27
    3
    Home Country
    Czech Republic Czech Republic
    mm1352000 said:
    Lapos said:
    Yes, I am done, and after I stopped updating DVB-S channels located. The signal shows correctly, but does not find any stations. I've tried almost all combinations in connection with drivers, but to no avail.
    Obviously I'm doing something wrong, but I do not know where to look for.
    Click to expand...
    It is possible that your CAM is not compatible with TBS CI slots. In any case, please:
    1. Set TV Server log level to debug: http://wiki.team-mediaportal.com/1_.../TV-Server_Configuration/06_General#Log_Level
    2. Restart the TV service ("manual control", "stop service"... then "start service").
    3. Perform a new scan for 10 transponders/frequencies then cancel.
    4. Use the watchdog/debug tool with option 3 to export all existing log files: http://wiki.team-mediaportal.com/1_..._Non_Reproducible_Problems_within_MediaPortal
    5. Post/attach the zip file here.
    mm
    Click to expand...

    When you try to export WatchDog appeared repeatedly error. Sending at least logs that are ready before the fall of applications. I hope it helps.
     

    Attachments

    • err1.jpg
      err1.jpg
      68.1 KB
    • MPTemp.zip
      1.2 MB
    M

    mm1352000

    Retired Team Member
  • Premium Supporter
    • September 1, 2008
    21,577
    8,224
    Home Country
    New Zealand New Zealand
    Thanks :)
    Nothing obviously wrong there.
    Please remove the CAM and try to scan again.
     
    Lapos

    Lapos

    Portal Member
    January 9, 2014
    27
    3
    Home Country
    Czech Republic Czech Republic
    mm1352000 said:
    Thanks :)
    Nothing obviously wrong there.
    Please remove the CAM and try to scan again.
    Click to expand...

    Here is the result. Unfortunately, no station.
    Still appears with the message:
    - Manual Control -> Select uncoded channel -> Start TimeSchift
    - 5-8 seconds delay
    - A window with the message "No PMT found"

    Sending logs.
     

    Attachments

    • MPTemp_2.zip
      1.6 MB
    M

    mm1352000

    Retired Team Member
  • Premium Supporter
    • September 1, 2008
    21,577
    8,224
    Home Country
    New Zealand New Zealand
    Lapos said:
    Here is the result. Unfortunately, no station.
    Still appears with the message:
    - Manual Control -> Select uncoded channel -> Start TimeSchift
    - 5-8 seconds delay
    - A window with the message "No PMT found"

    Sending logs.
    Click to expand...
    It looks like channels are found. So, removing the CAM allowed the channels to be found. Am I right?

    Also, it looks like you were able to tune some channels. For example:
    [collapse]
    [2014-01-11 15:35:09,009] [Log ] [7 ] [INFO ] - Controller: find free card for channel TA3
    [2014-01-11 15:35:09,011] [Log ] [7 ] [INFO ] - Controller: find card for channel TA3
    [2014-01-11 15:35:09,015] [Log ] [7 ] [INFO ] - Controller: got 1 tuning details for TA3
    [2014-01-11 15:35:09,018] [Log ] [7 ] [INFO ] - Controller: channel #1 DVBS:tv:Towercom TA3 Freq:11836000 ONID:3 TSID:3207 SID:5107 PMT:0x3EF FTA:True LCN:10000 SymbolRate:27500 Modulation:ModNotSet Polarisation:LinearH InnerFecRate:Rate5_6 DisEqc:Level1AA band:Universal Pilot:NotSet RollOff:NotSet
    [2014-01-11 15:35:09,021] [Log ] [7 ] [INFO ] - Controller: card:1 type:RadioWebStream cannot tune to channel
    [2014-01-11 15:35:09,024] [Log ] [7 ] [INFO ] - Controller: card:2 type:DvbIP cannot tune to channel
    [2014-01-11 15:35:09,027] [Log ] [7 ] [INFO ] - Controller: card:3 type:DvbT cannot tune to channel
    [2014-01-11 15:35:09,030] [Log ] [7 ] [INFO ] - Controller: card:4 type:DvbT cannot tune to channel
    [2014-01-11 15:35:09,033] [Log ] [7 ] [INFO ] - Controller: card:5 type:DvbT cannot tune to channel
    [2014-01-11 15:35:09,036] [Log ] [7 ] [INFO ] - Controller: card:6 type:DvbT cannot tune to channel
    [2014-01-11 15:35:09,039] [Log ] [7 ] [INFO ] - Controller: card:7 type:DvbS can tune to channel
    [2014-01-11 15:35:09,043] [Log ] [7 ] [INFO ] - Controller: card:8 type:DvbS channel not mapped
    [2014-01-11 15:35:09,046] [Log ] [7 ] [INFO ] - Controller: found 1 card(s) for channel
    [2014-01-11 15:35:09,048] [Log ] [7 ] [INFO ] - AdvancedCardAllocation.GetAvailableCardsForChannel took 36 msec
    [2014-01-11 15:35:09,051] [Log ] [7 ] [INFO ] - Controller: found 1 free card(s)
    [2014-01-11 15:35:09,053] [Log ] [7 ] [INFO ] - AdvancedCardAllocation.GetFreeCardsForChannel took 44 msec
    [2014-01-11 15:35:09,059] [Log ] [7 ] [DEBUG] - CardReservationBase.RequestCardTuneReservation: placed reservation with id=67, tuningdetails=DVBS:tv:Towercom TA3 Freq:11836000 ONID:3 TSID:3207 SID:5107 PMT:0x3EF FTA:True LCN:10000 SymbolRate:27500 Modulation:ModNotSet Polarisation:LinearH InnerFecRate:Rate5_6 DisEqc:Level1AA band:Universal Pilot:NotSet RollOff:NotSet
    [2014-01-11 15:35:09,062] [Log ] [7 ] [INFO ] - Controller: card:7 type:DvbS users: 0
    [2014-01-11 15:35:09,065] [Log ] [7 ] [INFO ] - Controller: card:7 type:DvbS is available
    [2014-01-11 15:35:09,068] [Log ] [7 ] [INFO ] - Controller: try max 1 of 1 cards for timeshifting
    [2014-01-11 15:35:09,071] [Log ] [7 ] [DEBUG] - CardReservationBase: tvcard=7, user=lapacek-dell, dbChannel=400, ticket=67, tunestate=Tuning, stopstate=Idle
    [2014-01-11 15:35:09,074] [Log ] [7 ] [INFO ] - card: CardTune 7 TA3 lapacek-dell:7:-1
    [2014-01-11 15:35:09,077] [Log ] [7 ] [INFO ] - card: Tune on card 7 to subchannel TA3
    [2014-01-11 15:35:09,080] [Log ] [7 ] [DEBUG] - card: user: lapacek-dell:7:-1 tune DVBS:tv:Towercom TA3 Freq:11836000 ONID:3 TSID:3207 SID:5107 PMT:0x3EF FTA:True LCN:10000 SymbolRate:27500 Modulation:ModNotSet Polarisation:LinearH InnerFecRate:Rate5_6 DisEqc:Level1AA band:Universal Pilot:NotSet RollOff:NotSet
    [2014-01-11 15:35:09,087] [Log ] [7 ] [DEBUG] - TimeShifter.OnBeforeTune: resetting audio/video events
    [2014-01-11 15:35:09,090] [Log ] [7 ] [INFO ] - dvbs: Tune:DVBS:tv:Towercom TA3 Freq:11836000 ONID:3 TSID:3207 SID:5107 PMT:0x3EF FTA:True LCN:10000 SymbolRate:27500 Modulation:ModNotSet Polarisation:LinearH InnerFecRate:Rate5_6 DisEqc:Level1AA band:Universal Pilot:NotSet RollOff:NotSet
    [2014-01-11 15:35:09,093] [Log ] [7 ] [INFO ] - dvbs: Tune:DVBS:tv:Towercom TA3 Freq:11836000 ONID:3 TSID:3207 SID:5107 PMT:0x3EF FTA:True LCN:10000 SymbolRate:27500 Modulation:ModNotSet Polarisation:LinearH InnerFecRate:Rate5_6 DisEqc:Level1AA band:Universal Pilot:NotSet RollOff:NotSet
    [2014-01-11 15:35:09,095] [Log ] [7 ] [INFO ] - dvb:GetNewSubChannel:0 #0
    [2014-01-11 15:35:09,098] [Log ] [7 ] [INFO ] - TvDvbChannel ctor new subchIndex:0
    [2014-01-11 15:35:09,100] [Log ] [7 ] [INFO ] - card: AddTuneEvent card: 7 / subch: 0
    [2014-01-11 15:35:09,103] [Log ] [7 ] [INFO ] - LNB low:9750 hi:10600 switch:11700
    [2014-01-11 15:35:09,105] [Log ] [7 ] [INFO ] - dvbs:channel modulation is set to ModNotSet
    [2014-01-11 15:35:09,108] [Log ] [7 ] [INFO ] - dvbs:channel FECRate is set to Rate5_6
    [2014-01-11 15:35:09,111] [Log ] [7 ] [DEBUG] - Conexant BDA: SendDiseqCommand: 0xE0 0x10 0x38 0xF3 0x4 0x0 0x3 0x0 0x1 0x3 0x1
    [2014-01-11 15:35:09,355] [Log ] [7 ] [INFO ] - dvb:confused:ubmiting tunerequest Channel:TA3 subChannel:0
    [2014-01-11 15:35:09,357] [Log ] [7 ] [INFO ] - dvb:using existing subchannel:0
    [2014-01-11 15:35:09,360] [Log ] [7 ] [INFO ] - dvb:confused:ubmit tunerequest size:1 new:0
    [2014-01-11 15:35:09,362] [Log ] [7 ] [INFO ] - subch:0 OnBeforeTune
    [2014-01-11 15:35:09,365] [Log ] [7 ] [INFO ] - dvb:confused:ubmit tunerequest calling put_TuneRequest
    [2014-01-11 15:35:09,367] [Log ] [7 ] [INFO ] - dvb:confused:ubmit tunerequest done calling put_TuneRequest
    [2014-01-11 15:35:09,369] [Log ] [7 ] [INFO ] - subch:0 OnAfterTune
    [2014-01-11 15:35:09,373] [Log ] [7 ] [INFO ] - RunGraph
    [2014-01-11 15:35:09,376] [Log ] [7 ] [INFO ] - subch:0 OnGraphStart
    [2014-01-11 15:35:09,379] [Log ] [7 ] [INFO ] - dvb: RunGraph
    [2014-01-11 15:35:09,671] [Log ] [7 ] [INFO ] - dvb: LockInOnSignal ok
    [2014-01-11 15:35:09,674] [Log ] [7 ] [INFO ] - subch:0 OnGraphStarted
    [2014-01-11 15:35:09,677] [Log ] [7 ] [INFO ] - subch:0 SetupPmtGrabber:pid 3EF sid:13F3
    [2014-01-11 15:35:09,680] [Log ] [7 ] [INFO ] - subch:0 set pmt grabber pmt:3EF sid:13F3
    [2014-01-11 15:35:09,682] [Log ] [7 ] [DEBUG] - TimeShifter.OnAfterTune: resetting audio/video time
    [2014-01-11 15:35:09,685] [Log ] [7 ] [DEBUG] - WaitForPMT: Waiting for PMT 3EF
    [2014-01-11 15:35:09,817] [Log ] [18 ] [INFO ] - subch:0 OnPMTReceived() pmt:3EF ran:True dynamic:False
    [2014-01-11 15:35:09,820] [Log ] [7 ] [DEBUG] - WaitForPMT: Found PMT after 0,135 seconds.
    [2014-01-11 15:35:09,823] [Log ] [7 ] [INFO ] - subch:0 SendPmt:13F3 13F3 FFFFFFFF 1
    [2014-01-11 15:35:09,825] [Log ] [7 ] [INFO ] - Decode pmt
    [2014-01-11 15:35:09,828] [Log ] [7 ] [INFO ] - Set descriptor data with length 6
    [2014-01-11 15:35:09,830] [Log ] [7 ] [INFO ] - subch:0 SendPMT: Channel is FTA, nothing to do.
    [2014-01-11 15:35:09,833] [Log ] [7 ] [INFO ] - subch:0 SetMpegPidMapping
    [2014-01-11 15:35:09,835] [Log ] [7 ] [INFO ] - subch:0 pid:3F9 pcr
    [2014-01-11 15:35:09,838] [Log ] [7 ] [INFO ] - subch:0 pid:3EF pmt
    [2014-01-11 15:35:09,840] [Log ] [7 ] [INFO ] - subch:0 pid:3F9 video type:MPEG-2
    [2014-01-11 15:35:09,843] [Log ] [7 ] [INFO ] - subch:0 map pid:3F9 video type:MPEG-2
    [2014-01-11 15:35:09,846] [Log ] [7 ] [INFO ] - subch:0 pid:403 audio lang:slo type:MPEG-1
    [2014-01-11 15:35:09,848] [Log ] [7 ] [INFO ] - subch:0 map pid:403 audio lang:slo type:MPEG-1
    [2014-01-11 15:35:09,851] [Log ] [7 ] [DEBUG] - OnPMTReceived: MDAPI disabled. Possible reasons are _mdplugs=null or provider not listed
    [2014-01-11 15:35:09,855] [Log ] [7 ] [INFO ] - subch:0 stop tif
    [2014-01-11 15:35:09,857] [Log ] [7 ] [DEBUG] - WaitForPmt: PMT handling took 0,034 seconds.
    [2014-01-11 15:35:09,863] [Log ] [7 ] [DEBUG] - card: Tuner locked: True
    [2014-01-11 15:35:09,866] [Log ] [7 ] [INFO ] - **************************************************
    [2014-01-11 15:35:09,868] [Log ] [7 ] [INFO ] - ***** SIGNAL LEVEL: 94, SIGNAL QUALITY: 72 *****
    [2014-01-11 15:35:09,871] [Log ] [7 ] [INFO ] - **************************************************
    [2014-01-11 15:35:09,873] [Log ] [7 ] [DEBUG] - card: tuned user: lapacek-dell subchannel: 0
    [2014-01-11 15:35:09,876] [Log ] [7 ] [INFO ] - user:lapacek-dell add
    [2014-01-11 15:35:09,879] [Log ] [7 ] [INFO ] - card2:lapacek-dell 7 0
    [2014-01-11 15:35:09,881] [Log ] [7 ] [INFO ] - Controller: delete timeshift files D:\TimeSchiftBuffer\live7-0.ts
    [2014-01-11 15:35:09,884] [Log ] [7 ] [INFO ] - Controller: epg stop
    [2014-01-11 15:35:09,888] [Log ] [7 ] [INFO ] - card: StartTimeShifting 7 D:\TimeSchiftBuffer\live7-0.ts
    [2014-01-11 15:35:09,891] [Log ] [7 ] [INFO ] - card: CAM enabled : True
    [2014-01-11 15:35:09,894] [Log ] [7 ] [INFO ] - subch:0 SetTimeShiftFileName:D:\TimeSchiftBuffer\live7-0.ts
    [2014-01-11 15:35:09,896] [Log ] [7 ] [INFO ] - Set video / audio observer
    [2014-01-11 15:35:09,898] [Log ] [7 ] [INFO ] - subch:0 SetTimeShiftFileName fill in pids
    [2014-01-11 15:35:09,901] [Log ] [7 ] [INFO ] - subch:0-0 tswriter StartTimeshifting...
    [2014-01-11 15:35:09,904] [Log ] [7 ] [INFO ] - card: WaitForFile - waiting _eventAudio & _eventVideo
    [2014-01-11 15:35:09,923] [Log ] [18 ] [INFO ] - PID seen - type = Audio
    [2014-01-11 15:35:09,926] [Log ] [18 ] [INFO ] - audioVideoEventHandler Audio
    [2014-01-11 15:35:09,953] [Log ] [18 ] [INFO ] - PID seen - type = Video
    [2014-01-11 15:35:09,956] [Log ] [18 ] [INFO ] - audioVideoEventHandler Video
    [2014-01-11 15:35:09,959] [Log ] [7 ] [INFO ] - card: WaitForFile - video and audio are seen after 0,055 seconds[/collapse]

    I don't see any "no PMT found" errors. Please give the name of the channel that you tried to tune, and the date/time that you tried it.

    mm
     
    Lapos

    Lapos

    Portal Member
    January 9, 2014
    27
    3
    Home Country
    Czech Republic Czech Republic
    mm1352000 said:
    Lapos said:
    Here is the result. Unfortunately, no station.
    Still appears with the message:
    - Manual Control -> Select uncoded channel -> Start TimeSchift
    - 5-8 seconds delay
    - A window with the message "No PMT found"

    Sending logs.
    Click to expand...
    It looks like channels are found. So, removing the CAM allowed the channels to be found. Am I right?

    Also, it looks like you were able to tune some channels. For example:
    [collapse]
    [2014-01-11 15:35:09,009] [Log ] [7 ] [INFO ] - Controller: find free card for channel TA3
    [2014-01-11 15:35:09,011] [Log ] [7 ] [INFO ] - Controller: find card for channel TA3
    [2014-01-11 15:35:09,015] [Log ] [7 ] [INFO ] - Controller: got 1 tuning details for TA3
    [2014-01-11 15:35:09,018] [Log ] [7 ] [INFO ] - Controller: channel #1 DVBS:tv:Towercom TA3 Freq:11836000 ONID:3 TSID:3207 SID:5107 PMT:0x3EF FTA:True LCN:10000 SymbolRate:27500 Modulation:ModNotSet Polarisation:LinearH InnerFecRate:Rate5_6 DisEqc:Level1AA band:Universal Pilot:NotSet RollOff:NotSet
    [2014-01-11 15:35:09,021] [Log ] [7 ] [INFO ] - Controller: card:1 type:RadioWebStream cannot tune to channel
    [2014-01-11 15:35:09,024] [Log ] [7 ] [INFO ] - Controller: card:2 type:DvbIP cannot tune to channel
    [2014-01-11 15:35:09,027] [Log ] [7 ] [INFO ] - Controller: card:3 type:DvbT cannot tune to channel
    [2014-01-11 15:35:09,030] [Log ] [7 ] [INFO ] - Controller: card:4 type:DvbT cannot tune to channel
    [2014-01-11 15:35:09,033] [Log ] [7 ] [INFO ] - Controller: card:5 type:DvbT cannot tune to channel
    [2014-01-11 15:35:09,036] [Log ] [7 ] [INFO ] - Controller: card:6 type:DvbT cannot tune to channel
    [2014-01-11 15:35:09,039] [Log ] [7 ] [INFO ] - Controller: card:7 type:DvbS can tune to channel
    [2014-01-11 15:35:09,043] [Log ] [7 ] [INFO ] - Controller: card:8 type:DvbS channel not mapped
    [2014-01-11 15:35:09,046] [Log ] [7 ] [INFO ] - Controller: found 1 card(s) for channel
    [2014-01-11 15:35:09,048] [Log ] [7 ] [INFO ] - AdvancedCardAllocation.GetAvailableCardsForChannel took 36 msec
    [2014-01-11 15:35:09,051] [Log ] [7 ] [INFO ] - Controller: found 1 free card(s)
    [2014-01-11 15:35:09,053] [Log ] [7 ] [INFO ] - AdvancedCardAllocation.GetFreeCardsForChannel took 44 msec
    [2014-01-11 15:35:09,059] [Log ] [7 ] [DEBUG] - CardReservationBase.RequestCardTuneReservation: placed reservation with id=67, tuningdetails=DVBS:tv:Towercom TA3 Freq:11836000 ONID:3 TSID:3207 SID:5107 PMT:0x3EF FTA:True LCN:10000 SymbolRate:27500 Modulation:ModNotSet Polarisation:LinearH InnerFecRate:Rate5_6 DisEqc:Level1AA band:Universal Pilot:NotSet RollOff:NotSet
    [2014-01-11 15:35:09,062] [Log ] [7 ] [INFO ] - Controller: card:7 type:DvbS users: 0
    [2014-01-11 15:35:09,065] [Log ] [7 ] [INFO ] - Controller: card:7 type:DvbS is available
    [2014-01-11 15:35:09,068] [Log ] [7 ] [INFO ] - Controller: try max 1 of 1 cards for timeshifting
    [2014-01-11 15:35:09,071] [Log ] [7 ] [DEBUG] - CardReservationBase: tvcard=7, user=lapacek-dell, dbChannel=400, ticket=67, tunestate=Tuning, stopstate=Idle
    [2014-01-11 15:35:09,074] [Log ] [7 ] [INFO ] - card: CardTune 7 TA3 lapacek-dell:7:-1
    [2014-01-11 15:35:09,077] [Log ] [7 ] [INFO ] - card: Tune on card 7 to subchannel TA3
    [2014-01-11 15:35:09,080] [Log ] [7 ] [DEBUG] - card: user: lapacek-dell:7:-1 tune DVBS:tv:Towercom TA3 Freq:11836000 ONID:3 TSID:3207 SID:5107 PMT:0x3EF FTA:True LCN:10000 SymbolRate:27500 Modulation:ModNotSet Polarisation:LinearH InnerFecRate:Rate5_6 DisEqc:Level1AA band:Universal Pilot:NotSet RollOff:NotSet
    [2014-01-11 15:35:09,087] [Log ] [7 ] [DEBUG] - TimeShifter.OnBeforeTune: resetting audio/video events
    [2014-01-11 15:35:09,090] [Log ] [7 ] [INFO ] - dvbs: Tune:DVBS:tv:Towercom TA3 Freq:11836000 ONID:3 TSID:3207 SID:5107 PMT:0x3EF FTA:True LCN:10000 SymbolRate:27500 Modulation:ModNotSet Polarisation:LinearH InnerFecRate:Rate5_6 DisEqc:Level1AA band:Universal Pilot:NotSet RollOff:NotSet
    [2014-01-11 15:35:09,093] [Log ] [7 ] [INFO ] - dvbs: Tune:DVBS:tv:Towercom TA3 Freq:11836000 ONID:3 TSID:3207 SID:5107 PMT:0x3EF FTA:True LCN:10000 SymbolRate:27500 Modulation:ModNotSet Polarisation:LinearH InnerFecRate:Rate5_6 DisEqc:Level1AA band:Universal Pilot:NotSet RollOff:NotSet
    [2014-01-11 15:35:09,095] [Log ] [7 ] [INFO ] - dvb:GetNewSubChannel:0 #0
    [2014-01-11 15:35:09,098] [Log ] [7 ] [INFO ] - TvDvbChannel ctor new subchIndex:0
    [2014-01-11 15:35:09,100] [Log ] [7 ] [INFO ] - card: AddTuneEvent card: 7 / subch: 0
    [2014-01-11 15:35:09,103] [Log ] [7 ] [INFO ] - LNB low:9750 hi:10600 switch:11700
    [2014-01-11 15:35:09,105] [Log ] [7 ] [INFO ] - dvbs:channel modulation is set to ModNotSet
    [2014-01-11 15:35:09,108] [Log ] [7 ] [INFO ] - dvbs:channel FECRate is set to Rate5_6
    [2014-01-11 15:35:09,111] [Log ] [7 ] [DEBUG] - Conexant BDA: SendDiseqCommand: 0xE0 0x10 0x38 0xF3 0x4 0x0 0x3 0x0 0x1 0x3 0x1
    [2014-01-11 15:35:09,355] [Log ] [7 ] [INFO ] - dvb:confused:ubmiting tunerequest Channel:TA3 subChannel:0
    [2014-01-11 15:35:09,357] [Log ] [7 ] [INFO ] - dvb:using existing subchannel:0
    [2014-01-11 15:35:09,360] [Log ] [7 ] [INFO ] - dvb:confused:ubmit tunerequest size:1 new:0
    [2014-01-11 15:35:09,362] [Log ] [7 ] [INFO ] - subch:0 OnBeforeTune
    [2014-01-11 15:35:09,365] [Log ] [7 ] [INFO ] - dvb:confused:ubmit tunerequest calling put_TuneRequest
    [2014-01-11 15:35:09,367] [Log ] [7 ] [INFO ] - dvb:confused:ubmit tunerequest done calling put_TuneRequest
    [2014-01-11 15:35:09,369] [Log ] [7 ] [INFO ] - subch:0 OnAfterTune
    [2014-01-11 15:35:09,373] [Log ] [7 ] [INFO ] - RunGraph
    [2014-01-11 15:35:09,376] [Log ] [7 ] [INFO ] - subch:0 OnGraphStart
    [2014-01-11 15:35:09,379] [Log ] [7 ] [INFO ] - dvb: RunGraph
    [2014-01-11 15:35:09,671] [Log ] [7 ] [INFO ] - dvb: LockInOnSignal ok
    [2014-01-11 15:35:09,674] [Log ] [7 ] [INFO ] - subch:0 OnGraphStarted
    [2014-01-11 15:35:09,677] [Log ] [7 ] [INFO ] - subch:0 SetupPmtGrabber:pid 3EF sid:13F3
    [2014-01-11 15:35:09,680] [Log ] [7 ] [INFO ] - subch:0 set pmt grabber pmt:3EF sid:13F3
    [2014-01-11 15:35:09,682] [Log ] [7 ] [DEBUG] - TimeShifter.OnAfterTune: resetting audio/video time
    [2014-01-11 15:35:09,685] [Log ] [7 ] [DEBUG] - WaitForPMT: Waiting for PMT 3EF
    [2014-01-11 15:35:09,817] [Log ] [18 ] [INFO ] - subch:0 OnPMTReceived() pmt:3EF ran:True dynamic:False
    [2014-01-11 15:35:09,820] [Log ] [7 ] [DEBUG] - WaitForPMT: Found PMT after 0,135 seconds.
    [2014-01-11 15:35:09,823] [Log ] [7 ] [INFO ] - subch:0 SendPmt:13F3 13F3 FFFFFFFF 1
    [2014-01-11 15:35:09,825] [Log ] [7 ] [INFO ] - Decode pmt
    [2014-01-11 15:35:09,828] [Log ] [7 ] [INFO ] - Set descriptor data with length 6
    [2014-01-11 15:35:09,830] [Log ] [7 ] [INFO ] - subch:0 SendPMT: Channel is FTA, nothing to do.
    [2014-01-11 15:35:09,833] [Log ] [7 ] [INFO ] - subch:0 SetMpegPidMapping
    [2014-01-11 15:35:09,835] [Log ] [7 ] [INFO ] - subch:0 pid:3F9 pcr
    [2014-01-11 15:35:09,838] [Log ] [7 ] [INFO ] - subch:0 pid:3EF pmt
    [2014-01-11 15:35:09,840] [Log ] [7 ] [INFO ] - subch:0 pid:3F9 video type:MPEG-2
    [2014-01-11 15:35:09,843] [Log ] [7 ] [INFO ] - subch:0 map pid:3F9 video type:MPEG-2
    [2014-01-11 15:35:09,846] [Log ] [7 ] [INFO ] - subch:0 pid:403 audio lang:slo type:MPEG-1
    [2014-01-11 15:35:09,848] [Log ] [7 ] [INFO ] - subch:0 map pid:403 audio lang:slo type:MPEG-1
    [2014-01-11 15:35:09,851] [Log ] [7 ] [DEBUG] - OnPMTReceived: MDAPI disabled. Possible reasons are _mdplugs=null or provider not listed
    [2014-01-11 15:35:09,855] [Log ] [7 ] [INFO ] - subch:0 stop tif
    [2014-01-11 15:35:09,857] [Log ] [7 ] [DEBUG] - WaitForPmt: PMT handling took 0,034 seconds.
    [2014-01-11 15:35:09,863] [Log ] [7 ] [DEBUG] - card: Tuner locked: True
    [2014-01-11 15:35:09,866] [Log ] [7 ] [INFO ] - **************************************************
    [2014-01-11 15:35:09,868] [Log ] [7 ] [INFO ] - ***** SIGNAL LEVEL: 94, SIGNAL QUALITY: 72 *****
    [2014-01-11 15:35:09,871] [Log ] [7 ] [INFO ] - **************************************************
    [2014-01-11 15:35:09,873] [Log ] [7 ] [DEBUG] - card: tuned user: lapacek-dell subchannel: 0
    [2014-01-11 15:35:09,876] [Log ] [7 ] [INFO ] - user:lapacek-dell add
    [2014-01-11 15:35:09,879] [Log ] [7 ] [INFO ] - card2:lapacek-dell 7 0
    [2014-01-11 15:35:09,881] [Log ] [7 ] [INFO ] - Controller: delete timeshift files D:\TimeSchiftBuffer\live7-0.ts
    [2014-01-11 15:35:09,884] [Log ] [7 ] [INFO ] - Controller: epg stop
    [2014-01-11 15:35:09,888] [Log ] [7 ] [INFO ] - card: StartTimeShifting 7 D:\TimeSchiftBuffer\live7-0.ts
    [2014-01-11 15:35:09,891] [Log ] [7 ] [INFO ] - card: CAM enabled : True
    [2014-01-11 15:35:09,894] [Log ] [7 ] [INFO ] - subch:0 SetTimeShiftFileName:D:\TimeSchiftBuffer\live7-0.ts
    [2014-01-11 15:35:09,896] [Log ] [7 ] [INFO ] - Set video / audio observer
    [2014-01-11 15:35:09,898] [Log ] [7 ] [INFO ] - subch:0 SetTimeShiftFileName fill in pids
    [2014-01-11 15:35:09,901] [Log ] [7 ] [INFO ] - subch:0-0 tswriter StartTimeshifting...
    [2014-01-11 15:35:09,904] [Log ] [7 ] [INFO ] - card: WaitForFile - waiting _eventAudio & _eventVideo
    [2014-01-11 15:35:09,923] [Log ] [18 ] [INFO ] - PID seen - type = Audio
    [2014-01-11 15:35:09,926] [Log ] [18 ] [INFO ] - audioVideoEventHandler Audio
    [2014-01-11 15:35:09,953] [Log ] [18 ] [INFO ] - PID seen - type = Video
    [2014-01-11 15:35:09,956] [Log ] [18 ] [INFO ] - audioVideoEventHandler Video
    [2014-01-11 15:35:09,959] [Log ] [7 ] [INFO ] - card: WaitForFile - video and audio are seen after 0,055 seconds[/collapse]

    I don't see any "no PMT found" errors. Please give the name of the channel that you tried to tune, and the date/time that you tried it.

    mm
    Click to expand...

    Unfortunately, it again does not find any stations. That's the message I picked up after processing the logs.
    I have to access the server, need to TeamViewer?
    Or am I better clean the logs and perform debugging without CAM again?
     
    M

    mm1352000

    Retired Team Member
  • Premium Supporter
    • September 1, 2008
    21,577
    8,224
    Home Country
    New Zealand New Zealand
    Lapos said:
    Unfortunately, it again does not find any stations. That's the message I picked up after processing the logs.
    I have to access the server, need to TeamViewer?
    Or am I better clean the logs and perform debugging without CAM again?
    Click to expand...
    I'm happy to try TeamViewer. :)
     

    Users who are viewing this thread

    Online now: 2 (members: 0, guests: 2)

    About The Project

    The vision of the MediaPortal project is to create a free open source media centre application, which supports all advanced media centre functions, and is accessible to all Windows users.

    In reaching this goal we are working every day to make sure our software is one of the best.

             

    Quick Navigation

    Support MediaPortal!

    The team works very hard to make sure the community is running the best HTPC-software. We give away MediaPortal for free but hosting and software is not for us.

    Care to support our work with a few bucks? We'd really appreciate it!

    Community platform by XenForo® © 2010-2021 XenForo Ltd.
    Top Bottom