Reply to thread

Message

<blockquote data-quote="BlueMax1916" data-source="post: 1178149" data-attributes="member: 30294">Hi,I had the dreaded 'Timeshift could not be started' yesterday evening but only on channel No. 7 (ProSieben). All other channels still were working. I have attached the logs. After I closed MediaPortal directly after selecting channel No. 7. This channel did not work until about 2 hours ago when it strated to work again. I had this on some occasions during the last 6 months but as it cured itself after some time I did not seek help. Having set up a new HTPC three weeks ago (HTPC 2 in my System Specs) I thought it would go away. But now there it is.For your information. I had a DD Cine S2 V7 from the first day of installation. But it turned out that tuner 2 had troubles and I got 'Nothing found' during a scan (not 'no signal' but 'nothing found'). I returned the card to Digital Devices but they said its o.k. Meanwhile I had a Cine S2 V6.5 in HTPC 2. The logs were made with the Cine S2 V6.5. After I made the logs I replaced the V6.5 with the V7 which just had arrived yesterday. After a channel scan with updated satellite list I still had the same problem with channel No.7 until this evening when channel No. 7 started to work again. So in short it does not seem to be related to the TV card hardware.Please could the developers have a look at the logs as I really would like to know what happened 'behind the curtains' and also I would like to find a cure for the problem. I have a fresh Windows 10 and MediaPortal 1.14 Pre-Release install and I wonder what causes the trouble. Thank you.CheersBlue Max</blockquote>

[QUOTE="BlueMax1916, post: 1178149, member: 30294"] Hi, I had the dreaded 'Timeshift could not be started' yesterday evening but only on channel No. 7 (ProSieben). All other channels still were working. I have attached the logs. After I closed MediaPortal directly after selecting channel No. 7. This channel did not work until about 2 hours ago when it strated to work again. I had this on some occasions during the last 6 months but as it cured itself after some time I did not seek help. Having set up a new HTPC three weeks ago (HTPC 2 in my System Specs) I thought it would go away. But now there it is. For your information. I had a DD Cine S2 V7 from the first day of installation. But it turned out that tuner 2 had troubles and I got 'Nothing found' during a scan (not 'no signal' but 'nothing found'). I returned the card to Digital Devices but they said its o.k. Meanwhile I had a Cine S2 V6.5 in HTPC 2. The logs were made with the Cine S2 V6.5. After I made the logs I replaced the V6.5 with the V7 which just had arrived yesterday. After a channel scan with updated satellite list I still had the same problem with channel No.7 until this evening when channel No. 7 started to work again. So in short it does not seem to be related to the TV card hardware. Please could the developers have a look at the logs as I really would like to know what happened 'behind the curtains' and also I would like to find a cure for the problem. I have a fresh Windows 10 and MediaPortal 1.14 Pre-Release install and I wonder what causes the trouble. Thank you. Cheers Blue Max [/QUOTE]

Verification