Reply to thread

Message: <blockquote data-quote="Anders" data-source="post: 483147" data-attributes="member: 28872">Some testingHi all,I have the same problem as Curry has descibed earlier. I have a laptop with XP Pro SP3, fully updated with Hauppauge HVR900H and the WinTV-CI module. On this i have installed a clean MP 1.0.2 and also the compleate WinTV7 application from the WinTV 7 CD 1.1d. The WinTV7 aplication runs as it should, with both FTA and scrambled channels so the hardware is there and working. When I start MP though the problem starts. If I don't assign the CI-module to the HVR-900H I can scan for channels, it finds all channels (FTA and scrambled) and I can preview FTA channels without any problem, but of course I cannot view any scrambled channels. At least that is, after starting WinTv7 once.If I assign the CI-module to the HVR-900H BDA tuner I will get BSOD as soon as I try to do something with the card, scanning for channels or, as I have the channels already found from the scan without the CI-module, trying to preview any channel, FTA or scrambled. It doesn't matter wether I have indicated that the HVR-900H has a CAM or not it is the assignment of the CI-module that starts the problem.With Currys new TVLibrary.dll it still dosn't work. I don't get BSOD but instead I get the message "unknown error" when I try to preview any channel, FTA or scrambled. In the Error log the relevant message must be:2009-07-07 23:24:17.515625 [14]: Exception   <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite5" alt=":confused:" title="Confused    :confused:" loading="lazy" data-shortname=":confused:" />ystem.MissingMethodException: Metoden hittades inte: Boolean TvLibrary.Interfaces.IChannel.IsDifferentTransponder(TvLibrary.Interfaces.IChannel).   vid TvLibrary.Implementations.DVB.TvCardDVBT.Tune(Int32 subChannelId, IChannel channel)   vid TvLibrary.Implementations.Hybrid.HybridCardGroup.Tune(Int32 subChannelId, IChannel channel)   vid TvLibrary.Implementations.Hybrid.HybridCard.Tune(Int32 subChannelId, IChannel channel)   vid TvService.CardTuner.Tune(User& user, IChannel channel, Int32 idChannel)(the swedish part simply states that the method couldn't be found, as if one could not understand that from the rest)The question is here; is there any other module you have changed Curry? Or do I have to install morpheus' CI-updating test build? Can I do that on my 1.0.2 build?It would be really nice to get this working. I hope this description can help somewhat. I can also test any new modules should anyone have some input.I can also add, as a final note, that I've had the CI-module working with a HVR1300 card. The 900H was present in that system but I choose to use the 1300. At least it worked initially it might have stopped working after a while but that is another issue I think.</blockquote>

Verification