Denmark
Hello,
I'm having trouble with my analog TV, but not my digital DVB-T card.
To be frank - everything works in my TV server...
I installed my DVB-T card in my Homeserver and installed the drivers, TVserver 1 RC3, FFDshow, AC3filter. Then i set up XMLTV plugin and grabbed the guidedata for my digital channels.
I then set up all my local computers with the mediaportal client and added the homeserver as their TVserver and provider of TV and guide data.
This also works - way better than I had expected
I then decided go all the way and kill my MS mediacenter and move the analog card to my homeserver. I would then reformat my Vista MC and reinstall with XP and Mediaportal client 1 RC3. This also works really well.
My homeserver on the other hand found my Hauppauge 500 card right away and hauppauge has a driveronly install tool and it found my cards and installed the drivers without any other programs.
TV server scanned my analog card and found 40+ channels (on each tuner as it is a dual card) - i then set up the guide data for each channel on my TV server and added them to my setup...
But....only DVB-T channels works!
whenever i tune into an analog channel from any client...it times out after 30 seconds and comes up with "no audio/video detected"
The TVserver TV.log reports "Card not Idle" but states in manual control, that it is idle.
TV-Server Version: 1.0 RC3
MediaPortal Version: 1.0 RC3
MediaPortal Skin: Monochrome
Windows Version: WHS SP2 and PowerPack
CPU Type: Opteron X2 2112
[b 1.1.0.283aHDD[/b]: 5 x 1TB Seagate Sata2
Memory: 4GB
Motherboard: Dell PowerEdge T105
Video Card: ATI ES1000 onboard
Video Card Driver: Catalyst 8.6
Sound Card: Soundblaster 5.1 USB ext.
Sound Card AC3: Optical out.
Sound Card Driver: 1.3.1
1. TV Card: Terratec 2400i DT
1. TV Card Type: DVB-T
1. TV Card Driver: 1.1.0.283a
2. TV Card: Hauppauge PVR-500 MCE
2. TV Card Type: Analog
2. TV Card Driver: cd_3.2
MPEG2 Video Codec: MPC
MPEG2 Audio Codec: MPA
h.264 Video Codec: Coreavc
Satelite/CableTV Provider:
HTPC Case:
Cooling:
Power Supply:
Remote: Microsoft MCE remote
TV: Hyundai 42 plasma
TV - HTPC Connection: DVI
I'm having trouble with my analog TV, but not my digital DVB-T card.
To be frank - everything works in my TV server...
I installed my DVB-T card in my Homeserver and installed the drivers, TVserver 1 RC3, FFDshow, AC3filter. Then i set up XMLTV plugin and grabbed the guidedata for my digital channels.
I then set up all my local computers with the mediaportal client and added the homeserver as their TVserver and provider of TV and guide data.
This also works - way better than I had expected
I then decided go all the way and kill my MS mediacenter and move the analog card to my homeserver. I would then reformat my Vista MC and reinstall with XP and Mediaportal client 1 RC3. This also works really well.
My homeserver on the other hand found my Hauppauge 500 card right away and hauppauge has a driveronly install tool and it found my cards and installed the drivers without any other programs.
TV server scanned my analog card and found 40+ channels (on each tuner as it is a dual card) - i then set up the guide data for each channel on my TV server and added them to my setup...
But....only DVB-T channels works!
whenever i tune into an analog channel from any client...it times out after 30 seconds and comes up with "no audio/video detected"
The TVserver TV.log reports "Card not Idle" but states in manual control, that it is idle.
TV-Server Version: 1.0 RC3
MediaPortal Version: 1.0 RC3
MediaPortal Skin: Monochrome
Windows Version: WHS SP2 and PowerPack
CPU Type: Opteron X2 2112
[b 1.1.0.283aHDD[/b]: 5 x 1TB Seagate Sata2
Memory: 4GB
Motherboard: Dell PowerEdge T105
Video Card: ATI ES1000 onboard
Video Card Driver: Catalyst 8.6
Sound Card: Soundblaster 5.1 USB ext.
Sound Card AC3: Optical out.
Sound Card Driver: 1.3.1
1. TV Card: Terratec 2400i DT
1. TV Card Type: DVB-T
1. TV Card Driver: 1.1.0.283a
2. TV Card: Hauppauge PVR-500 MCE
2. TV Card Type: Analog
2. TV Card Driver: cd_3.2
MPEG2 Video Codec: MPC
MPEG2 Audio Codec: MPA
h.264 Video Codec: Coreavc
Satelite/CableTV Provider:
HTPC Case:
Cooling:
Power Supply:
Remote: Microsoft MCE remote
TV: Hyundai 42 plasma
TV - HTPC Connection: DVI
