tv service not beeing loaded automatically on startup (1 Viewer)

[mm1352000]

@RicoHTPC
No problem.
Restoring over and over won't help unless you do something differently.

First thing to confirm after you restore and before you do anything else: is MySQL installed?

 

[RicoHTPC]

By restoring again I meant restoring to a point which was earlier than the other image.
See if that helps.
Mysql hasn't even been installed on the image before the one I am trying right now.

 

[mm1352000]

Okay. If the problem occurs again, please try to locate the MySQL log files and post them here.
I've been googling and most of the errors that mention "Plugin 'InnoDB' init function returned error." seem to relate to a mismatch between the configured and actual size of the log file (or a corrupt log file). I'm not sure if it has been the same for you, but it seems quite odd to me that MySQL would fail to start on boot... and then succeed when manually starting the TV service.

 

[The_Stig]

@Lehmden: on mobile device so cannot check your System specs, so I am guessing here: I had a 2 minute "no Signal" during Ger-Arg too. But this was due to a heavy rain storm which my Satellite dish did not like. Maybe the same for you?

 

[Lehmden]

Hi.

Maybe the same for you?

No rain here at this time. It was half an hour before the game starts. And since then the signal never was coming back again, if I use 1.8 TV Server. With 1.6 TV Server all is working flawlessly as ever. I've tried to install 1.8 some times yesterday but not a single installation gives me any signal. As soon as I install 1.6 the signal is there and the server starts and runs stable as I know it... So it must have something changed between those 2 releases what causing this massive issues here. And as I use the same MySQL version on both, the problem can't be related to MySQL. Even the not working Database from 1.8 Server is working without issues if I downgrade the installation to 1.6.
Maybe it's not the server but the TV Client, I can't tell exactly. In my sleeping room I still have a 1.8 client and this also has no signal, no matter if I use 1.6 or 1.8 TV Server... But if it's the client why there is "No Signal" trying to manually start timeshifting inside the 1.8 TV Server config too??? Will change this client back to 1.6 also as soon as possible...
But it's definitely no fault of Windows, Hardware or MySQL as all of them are working together with 1.6 TV Server and Client... Something must have changed in TV part of MP1.

Version 1.7 I never tried and I don't have it available here. If this is downloadable somewhere I can try 1.7 too, if this may help.

In general I can't experiment too much with TV part as I only have this for LiveTV. No Setop Box, no other PC capable of receiving LiveTV,... I need to get the system up and running normally as soon as possible. And if I only can achieve this with MP 1.6 TV Server I will use it until eternity..

Attached logs are from the recent 1.6 installation and the 1.8 logs were generated during the complete breakdown on Sunday.

Log files, channel names, dates and times are evidence.

OK, Channel Name was "Das Erste HD", the rest is sayed before.

 

[breese]

Wow you have something wrong happening....
Between the changes in timeshifting and Recording directories changing all over the place there appears to be something confusing the system or the software.
The last line in the logs Below appear to be some type of access denied and one cannot wonder if one of the drives ran out of space.


TVService.1.log
[2014-07-13 09:08:18,505] [Log ] [TVService] [DEBUG] - Controller: current timeshifting folder is "R:\Timeshift"

then something happens....
[2014-07-13 09:08:18,733] [Log ] [TVService] [DEBUG] - Controller: current timeshifting folder is "C:\ProgramData\Team MediaPortal\MediaPortal TV Server\timeshiftbuffer"

Then it changes again
[2014-07-13 09:09:22,717] [Log ] [13 ] [DEBUG] - Controller: current timeshifting folder is "R:\Timeshift"
[2014-07-13 09:09:22,876] [Log ] [13 ] [DEBUG] - Controller: current timeshifting folder is "C:\ProgramData\Team MediaPortal\MediaPortal TV Server\timeshiftbuffer"

[2014-07-13 09:10:36,854] [Log ] [14 ] [INFO ] - Controller: StartTimeShifting Das Erste HD 860
[2014-07-13 09:10:40,403] [Log ] [14 ] [INFO ] - Controller: Timeshifting failed, lets try next available card.
[2014-07-13 09:10:41,697] [Log ] [14 ] [INFO ] - Controller: delete timeshift files C:\ProgramData\Team MediaPortal\MediaPortal TV Server\timeshiftbuffer\live6-0.ts

That happens multiple times in both logs while you were watching football

Later in the day (TVService.log )
[2014-07-13 20:17:46,901] [Log ] [TVService] [INFO ] - TV Service: Started
[2014-07-13 20:18:43,694] [Log ] [scheduler thread] [INFO ] - tvcard:FreeSubChannel : subchannels STILL present 1, continuing graph

[2014-07-13 20:18:46,027] [Log ] [scheduler thread] [INFO ] - dvb: LockInOnSignal could not lock onto channel - no signal or bad signal


[2014-07-13 20:19:43,920] [Log ] [5 ] [INFO ] - dvbubmit tunerequest calling put_TuneRequest

[2014-07-13 20:19:44,146] [Log ] [DVB-S scan thread] [ERROR] - Exception ystem.Net.Sockets.SocketException (0x80004005): Eine vorhandene Verbindung wurde vom Remotehost geschlossen
Server stack trace:

0x80004005 = denotes "Access denied".
http://www.windowsanswers.net/articles/fix-0x80004005

 

[breese]

Little more Current info....
I am not sure where Continuity error... e ( prev 6 ) - bad signal? fits in but from your current 1.6 version something is happening.

TVService.log
[2014-07-15 14:05:14,939] [Log ] [scheduler thread] [INFO ] - card: StartRecording 6 D:\TV-Aufzeichnungen\Eisenbahn-Romantik\S1E562 - Die blaue Dampflok-Bibel - das Leben des Horst Obermayer.ts
[2014-07-15 14:05:14,939] [Log ] [scheduler thread] [INFO ] - StartRecording to D:\TV-Aufzeichnungen\Eisenbahn-Romantik\S1E562 - Die blaue Dampflok-Bibel - das Leben des Horst Obermayer.ts
[2014-07-15 14:05:14,939] [Log ] [scheduler thread] [INFO ] - subch:0 StartRecord(D:\TV-Aufzeichnungen\Eisenbahn-Romantik\S1E562 - Die blaue Dampflok-Bibel - das Leben des Horst Obermayer.ts)
[2014-07-15 14:05:14,939] [Log ] [scheduler thread] [INFO ] - subch:0-0 tswriter StartRecording...


[2014-07-15 14:42:21,500] [Log ] [PS StandbyWakeup] [DEBUG] - PS: System is busy and should not go to standby
[2014-07-15 14:42:33,793] [Log ] [5 ] [DEBUG] - Detecting BDA/WDM devices...
[2014-07-15 14:42:33,793] [Log ] [5 ] [DEBUG] - Detect legacy AM filter devices
[2014-07-15 14:42:33,808] [Log ] [5 ] [DEBUG] - Detect AM KS crossbar devices
[2014-07-15 14:42:33,808] [Log ] [5 ] [DEBUG] - Detect AM KS TV tuner devices
[2014-07-15 14:42:33,808] [Log ] [5 ] [DEBUG] - Detect BDA source devices

TSWriter.log
[2014-07-15 14:43:02,965] [76fd3a8] [1264] - Recorderid 1404 Continuity error... e ( prev 6 ) - bad signal?
[2014-07-15 14:43:02,965] [76fd3a8] [1264] - Recorderid 1406 Continuity error... 3 ( prev 0 ) - bad signal?
[2014-07-15 14:43:02,965] [76fd3a8] [1264] - Recorderid 1403 Continuity error... 1 ( prev c ) - bad signal?
[2014-07-15 14:43:02,965] [76fd3a8] [1264] - Recorderid 1402 Continuity error... d ( prev 8 ) - bad signal?
[2014-07-15 14:43:03,152] [76fd3a8] [1264] - Recorderid 1401 Continuity error... 3 ( prev f ) - bad signal?
[2014-07-15 14:43:03,152] [76fd3a8] [1264] - Recorderid 1406 Continuity error... d ( prev 9 ) - bad signal?
[2014-07-15 14:43:03,152] [76fd3a8] [1264] - Recorderid 1402 Continuity error... 6 ( prev f ) - bad signal?
[2014-07-15 14:43:03,152] [76fd3a8] [1264] - Recorderid 1403 Continuity error... a ( prev 3 ) - bad signal?
[2014-07-15 14:43:03,511] [76fd3a8] [1264] - Recorderid 1405 , No PayLoad, Continuity Counter should be the same ! 5 ( prev 2 )

TVService.log
[2014-07-15 14:43:02,980] [Log ] [5 ] [DEBUG] - Detecting BDA/WDM devices...
[2014-07-15 14:43:02,980] [Log ] [5 ] [DEBUG] - Detect legacy AM filter devices
[2014-07-15 14:43:02,980] [Log ] [5 ] [DEBUG] - Detect AM KS crossbar devices
[2014-07-15 14:43:02,980] [Log ] [5 ] [DEBUG] - Detect AM KS TV tuner devices
[2014-07-15 14:43:02,980] [Log ] [5 ] [DEBUG] - Detect BDA source devices

 

[Lehmden]

Hi.
I did not even tell that... Sometimes between saturday evening and sunday noon the path to Recording and Timeshift folders are changed back to C: Definitely without any interaction from me. As C is a not that big SSD this is filled in minutes... That's where the Access denied errors came from. It takes some time to see what's happened there. For this I was missing the DTM race sunday afternoon. I changed this back to the places I need and for some hours it seems to work. Later the day the TV Server is collapsed completely as described...

[2014-07-15 14:43:02,965] [76fd3a8] [1264] - Recorderid 1404 Continuity error... e ( prev 6 ) - bad signal?

This could be due to bad weather but I don't know... Such errors are happens every now and then if you use Satellite
.
I had more trouble with TV Server in last 6 Days than within all the 6 Years before...

 

[breese]

var rm = "read_more ...";
var o = "... Read Less";
var adjustheight = 20; // 20; //
breese said:
↑
[2014-07-15 14:43:02,965] [76fd3a8] [1264] - Recorderid 1404 Continuity error... e ( prev 6 ) - bad signal?
Click to expand...
This could be due to bad weather but I don't know... Such errors are happens every now and then if you use Satellite

Well the 1.8 logs are full of such errors.... Is it possible the Dish (assuming) is moving from wind?
Maybe has come loose?
I am just guessing

 

[Lehmden]

Hi.

Is it possible the Dish (assuming) is moving from wind?

But why is 1.6 TV Server working and 1.8 TV Server did not work with the same dish?