[fixed] TV: When NO EPG info => NO channel logo + Wrong/NO channel name (1 Viewer)

[wouter1971]

MediaPortal Version: 1.2.0 RC (Prod) / Recent SVN (Test)
MediaPortal Skin: StreamedMP
Windows Version: Windows 7 x64 (Prod) / Windows 7 x86 (Test)
CPU Type: AMD Phenom II X4 965 Black Edition
HDD: OCZ Vertex 60GB SSD
Memory: Corsair 800 Mhz 4Gb (Twin)
Motherboard: ASUS M4A785D-M PRO
Video Card: NVIDIA 430 Fanless
Video Card Driver: 266.33
Sound Card: REALTEK
Sound Card AC3: optical out
Sound Card Driver: Realtek driver
1. TV Card: FloppyDTV S2
1. TV Card Type: DVB-S2
1. TV Card Driver: Integrated Driver 5.7
2. TV Card: FloppyDTV S2
2. TV Card Type: DVB-S2
2. TV Card Driver: Integrated Driver 5.7
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: Cyberlink PowerDVD11 (Stand Alone Filters)
MPEG2 Audio Codec: ffdshow (Stand Alone Filters 6.00)
h.264 Video Codec: ffdshow DXVA + Cyberlink PowerDVD11 h.264 (Stand Alone Filters 6.00)
Satelite/CableTV Provider: CanalDigitaal Astra 19.2°E + Astra 23.5°E
HTPC Case: OrigenAE X15e
Cooling: 2 case fans and Scythe Big Shuriken CPU cooler
Power Supply: Seasonic 460 Watt Fanless
Remote: Logitech Harmony One
TV: LG 55LW650S (3DTV passive)
TV - HTPC Connection: HDMI

Hi devs,

I think i found a small bug in MP 1.2.0 RC, because no TV channel logo or correct TV channel name is visible if you switch TV channels from a channel with EPG info to a channel with NO EPG info.

Steps to reproduce:

- Select a TV channel with EPG guide info
- Switch to a channel with NO EPG guide info

Select channel info in full screen or switch back to small LiveTV screen

Result: NO channel logo and the previous channel name visible.

The same kind of result when starting up a channel with no EPG info after booting htpc.

Result: NO channel logo and no channel name visible.

I can supply logs but i think this bug is easy to reproduce.


Greetings,

Wouter

Update: Logs supplied first clean logs, second the logs with plugins/skin enabled

 

[elliottmc]

re: TV: When NO EPG info => NO channel logo + Wrong/NO channel name

Steps to reproduce:

- Select a TV channel with EPG guide info
- Switch to a channel with NO EPG guide info

Select channel info in full screen or switch back to small LiveTV screen

Result: NO channel logo and the previous channel name visible.

The same kind of result when starting up a channel with no EPG info after booting htpc.

Result: NO channel logo and no channel name visible.

I can supply logs but i think this bug is easy to reproduce.

Visible where? The EPG, TV Home, the OSD?

I think you need to supply logs so that we know what you have actually done. It might not be reproducible on all setups, so please don't use this excuse to not post logs.

Best wishes,

Mark

 

[wouter1971]

re: TV: When NO EPG info => NO channel logo + Wrong/NO channel name

Mark, visible on TV home and on OSD.
I will supply logs asap.

 

[wouter1971]

re: TV: When NO EPG info => NO channel logo + Wrong/NO channel name

Hi Mark and devs,

Debug logs attached to first post.

Greetings,

Wouter

p.s. i can make pictures of it too if it is necessary.

 

[Holzi]

AW: TV: When NO EPG info => NO channel logo + Wrong/NO channel name

No channel logo in TVOSD when there is no EPG I also noticed.

 

[wouter1971]

Re: AW: TV: When NO EPG info => NO channel logo + Wrong/NO channel name

No channel logo in TVOSD when there is no EPG I also noticed.

Ok, Holzi, at this point when you see this and press exit to go back to the smallTV screen in the right corner, you can see that the channel name below is the previous channel name.

 

[Mister Bean]

re: TV: When NO EPG info => NO channel logo + Wrong/NO channel name

Hi Wouter1971,

Same here! I hope this issue is solved in 1.2 final which will be released coming Monday. So dev's please check. It is definitely a bug.

Thanks in advance.

Regards,
Nico

 

[wouter1971]

re: TV: When NO EPG info => NO channel logo + Wrong/NO channel name

This is not going to be fixed now as the final build is beiing tested during the last 1,5 week. So this is for 1.3.0 Alpha i guess.

 

[Mister Bean]

re: TV: When NO EPG info => NO channel logo + Wrong/NO channel name

That will be a shame. I can't imagine that nobody of the dev's/testers has noticed this issue during testing the 1.2RC version!

Regards,
Nico

 

[Holzi]

AW: TV: When NO EPG info => NO channel logo + Wrong/NO channel name

This issue was already there in 1.2.0 ALPHA, 1.2.0 BETA and now in RC because nobody reported it I think.