TVEngine3 Snapshot: 04-03-2008 05-07h Revision 18530 (3 Viewers)

[limpwhizkid]

Hello.

Since a longer time i have a big problem with the tv-server.
After a fresh start of the tv server (and setup tv) i can watch and record tv shows for ours without problems.
But when i wait about half an hour before i try to watch (or record) a tv show media portal just hangs and nothings happens. If i now restart the tv server again everything works fine. After half an hour waiting again the same error.
Atached the tv-server-logs where i watched tv, waited a longer time and then tried to watch tv again.

Hopefully someone can help me with my problem.

logs are useless.. you didnt include mediaportal logs.. only tvserver...
and mediaportal is the one that hangs as you said.. so where are they ?

 

[cybernn]

Since version TVE3 18513 in error.log the following:

2008-04-03 19:03:09.515625 [12]: Exception   :System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt
   в TvLibrary.Interfaces.Analyzer.ITechnoTrend.IsCamPresent(Boolean& no)
   в TvLibrary.Implementations.DVB.TechnoTrend.IsCamPresent()
   в TvLibrary.Implementations.DVB.ConditionalAccess.IsCamReady()
2008-04-03 19:03:09.515625 [12]: Exception   :Attempted to read or write protected memory. This is often an indication that other memory is corrupt
2008-04-03 19:03:09.515625 [12]:   site      :Int32 IsCamPresent(Boolean ByRef)
2008-04-03 19:03:09.515625 [12]:   source    :TVLibrary
2008-04-03 19:03:09.515625 [12]:   stacktrace:   в TvLibrary.Interfaces.Analyzer.ITechnoTrend.IsCamPresent(Boolean& no)
   в TvLibrary.Implementations.DVB.TechnoTrend.IsCamPresent()
   в TvLibrary.Implementations.DVB.ConditionalAccess.IsCamReady()
2008-04-03 19:03:12.671875 [11]: Exception   :System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt
   в TvLibrary.Interfaces.Analyzer.ITechnoTrend.IsCamPresent(Boolean& no)
   в TvLibrary.Implementations.DVB.TechnoTrend.IsCamPresent()
   в TvLibrary.Implementations.DVB.ConditionalAccess.IsCamReady()
2008-04-03 19:03:12.671875 [11]: Exception   :Attempted to read or write protected memory. This is often an indication that other memory is corrupt
2008-04-03 19:03:12.671875 [11]:   site      :Int32 IsCamPresent(Boolean ByRef)
2008-04-03 19:03:12.671875 [11]:   source    :TVLibrary
2008-04-03 19:03:12.671875 [11]:   stacktrace:   в TvLibrary.Interfaces.Analyzer.ITechnoTrend.IsCamPresent(Boolean& no)
   в TvLibrary.Implementations.DVB.TechnoTrend.IsCamPresent()
   в TvLibrary.Implementations.DVB.ConditionalAccess.IsCamReady()

 

[grubi]

Not a big deal, however is there any reason for not having an icon in the setup-tv.exe any longer?

grubi.

 

[dman_lfc]

Since version TVE3 18513 in error.log the following:

2008-04-03 19:03:09.515625 [12]: Exception   :System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt
   в TvLibrary.Interfaces.Analyzer.ITechnoTrend.IsCamPresent(Boolean& no)
   в TvLibrary.Implementations.DVB.TechnoTrend.IsCamPresent()
   в TvLibrary.Implementations.DVB.ConditionalAccess.IsCamReady()
2008-04-03 19:03:09.515625 [12]: Exception   :Attempted to read or write protected memory. This is often an indication that other memory is corrupt
2008-04-03 19:03:09.515625 [12]:   site      :Int32 IsCamPresent(Boolean ByRef)
2008-04-03 19:03:09.515625 [12]:   source    :TVLibrary
2008-04-03 19:03:09.515625 [12]:   stacktrace:   в TvLibrary.Interfaces.Analyzer.ITechnoTrend.IsCamPresent(Boolean& no)
   в TvLibrary.Implementations.DVB.TechnoTrend.IsCamPresent()
   в TvLibrary.Implementations.DVB.ConditionalAccess.IsCamReady()
2008-04-03 19:03:12.671875 [11]: Exception   :System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt
   в TvLibrary.Interfaces.Analyzer.ITechnoTrend.IsCamPresent(Boolean& no)
   в TvLibrary.Implementations.DVB.TechnoTrend.IsCamPresent()
   в TvLibrary.Implementations.DVB.ConditionalAccess.IsCamReady()
2008-04-03 19:03:12.671875 [11]: Exception   :Attempted to read or write protected memory. This is often an indication that other memory is corrupt
2008-04-03 19:03:12.671875 [11]:   site      :Int32 IsCamPresent(Boolean ByRef)
2008-04-03 19:03:12.671875 [11]:   source    :TVLibrary
2008-04-03 19:03:12.671875 [11]:   stacktrace:   в TvLibrary.Interfaces.Analyzer.ITechnoTrend.IsCamPresent(Boolean& no)
   в TvLibrary.Implementations.DVB.TechnoTrend.IsCamPresent()
   в TvLibrary.Implementations.DVB.ConditionalAccess.IsCamReady()

Interesting..., any bad effects?
morpeus_xx is going to update some of this Technotrend handling since he has a card/CI & CAM to test against.

DMAN

 

[cybernn]

The strangest that at me after that have works 2 DVB-S cards Technotrend, on one of which CI slot with CAM.

At switching the sound of mistake Windows is sometimes audible. And sometimes all works without visual mistakes.
But is more often there is a lag, at switching from one card on another.

I described the given problem here.

 

[Meier]

Hello.

Since a longer time i have a big problem with the tv-server.
After a fresh start of the tv server (and setup tv) i can watch and record tv shows for ours without problems.
But when i wait about half an hour before i try to watch (or record) a tv show media portal just hangs and nothings happens. If i now restart the tv server again everything works fine. After half an hour waiting again the same error.
Atached the tv-server-logs where i watched tv, waited a longer time and then tried to watch tv again.

Hopefully someone can help me with my problem.

logs are useless.. you didnt include mediaportal logs.. only tvserver...
and mediaportal is the one that hangs as you said.. so where are they ?

sry...attached are the media portal logs.
another info: today i deleted my tv-database completely and made a new scan of all channels. the error is still the same. interesting is that it's never a problem to watch a recorded show.

 

[nschoot]

Still the Problem that Mediaportal refuses to go in standby as long as live tv is running wit TvServer.
peter

That is by design and unlikely to change. Why would you want to standby if the live tv is on?

Well, because I'm pressing the STANDBY button on my remote... What other options do I have?

I guess you can't detect whether the standby button has been pressed or it's going into stand by because of inactivity. On the other hand: if you don't want it to go into standby automatically, just disable that option in Windows. That's what I did. When I press the standby button, it should go into standby.

A "regular" TV never goes into standby automatically... (unless you swtich on "sleep mode")

Btw MP without TV Server DOES go into standby when the standby button is pressed during live TV, so the functionality was just changed... Can't it be made at least optional?

Also: The setup STILL does not detect MediaPortal and won't update the Client Plugin... Anyone else has that problem?

 

[MPUserFromGER]

Latest SVNs have big problems with timeshifting, if a recording is active.
Please see details here
https://forum.team-mediaportal.com/...timeshift-settings-if-recording-active-37610/

 

[rtv]

Also: The setup STILL does not detect MediaPortal and won't update the Client Plugin... Anyone else has that problem?

Still same answer: a proper MP 0.2.3.0 installation has been required once for SVN. Actually we shouldn't even pay attention if you report bugs with an installation like this - sorry...

 

[nschoot]

Also: The setup STILL does not detect MediaPortal and won't update the Client Plugin... Anyone else has that problem?

Still same answer: a proper MP 0.2.3.0 installation has been required once for SVN. Actually we shouldn't even pay attention if you report bugs with an installation like this - sorry...

What do you mean wtih "an installation like this" ?

I have been running MP 0.2.3.0 (w/o TV Server) since it was released... I just updated to the SVN's since last week (both MP and TVServer) and I had to install 18215 in order for the setup to detect MediaPortal. Newer setups never found MediaPortal.