TVplugin - avoiding RTSP in multiseat mode (test plz). (1 Viewer)

[Spooky]

Why is this not relevant for single seat? You also connect via TCP/IP?

The streaming isn't done via rtsp in single seat... since the files are local.

 

[mts]

disaster123: because a udp to localhost shouldn't make any trouble.

It works fine for me, also when multiple users are watching the same channel (much better than the regular rtsp-stream). Sometimes I have the problem, that when one client is watching a channel via sharing and then a second client wants to watch the same channel via rtsp-stream, the streaming doen't work any longer.

 

[cfforce]

It's slower here with my config (tested 1 Client).

Attached the logs.

<section name="tvservice">
<entry name="usertsp">no</entry>
<entry name="recordingpath">Z:\MCE\RECORDING</entry>
<entry name="timeshiftingpath">Z:\MCE\TIMESHIFT</entry>
Opened up one channel, and one recording...

Client 2 (different hardware):
RTSP: about 3-4 seconds channel change
NO_RSTP: about 7-8 seconds channel change

I have to say.. The TVService is running on a Windows 2003 R2 SP2 PDC, all clients are connected to this server (using domain security)

The server is fast enough.. reaching 97% of 1Gb in taskmanager when copieing large files over the network.
Clients and server are all connected to an 1Gbps managed switch; and server has a raid5 setup containing 6xWDC Raptors

 

[pnyberg]

TV-Server Version: TVE 3 latest SVN (usually)
MediaPortal Version: 1.0.0.0 RC1 latest SVN (usually)
MediaPortal Skin: BlueTwo (modded myself to be black)
Windows Version: Vista SP1
CPU Type: Athlon X2 4200+
HDD: 2x300 GB
Memory: 2 Gb
Motherboard: HP Pavilion D4494.se
Video Card: Sapphire HD2600XT Ultimate (Passive)
Video Card Driver: 8.3
Sound Card: Soundblaster X-Fi
Sound Card AC3: SPDIF
Sound Card Driver:
1. TV Card: FireDTV DVB-T
1. TV Card Type: DVB-T
1. TV Card Driver: Latest
2. TV Card: Asustek Europa II (SAA7134) DVB-T
2. TV Card Type: DVB-T
2. TV Card Driver: Latest
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: Cyberlink PowerDVD 7
MPEG2 Audio Codec: Dscaler Audio Decoder
h.264 Video Codec:
Satelite/CableTV Provider:
HTPC Case:
Cooling:
Power Supply:
Remote: MCE
TV: LCD ACER AT3705 (37")
TV - HTPC Connection: DVI-HDMI


Previously I had the following problems on my remote client: video/audio sync problems, intermittent stuttering, slow startup and stop of recorded shows, problems with skip steps etc, but when enabling this - ALL OF THESE PROBLEMS WENT AWAY!

Truly - WHY is this NOT the normal way in MP???
Is there something that is missing with this config? (I haven't found any missing features yet...)

Thanks Gibman!

 

[joboehl]

As you may see from other user reports, is not working 100% for everyone either.

In some cases stability might be worse than RTSP. We just dont know yet witch is better.

 

[iosub]

It's slower here with my config (tested 1 Client).

Attached the logs.

<section name="tvservice">
<entry name="usertsp">no</entry>
<entry name="recordingpath">Z:\MCE\RECORDING</entry>
<entry name="timeshiftingpath">Z:\MCE\TIMESHIFT</entry>
Opened up one channel, and one recording...

Client 2 (different hardware):
RTSP: about 3-4 seconds channel change
NO_RSTP: about 7-8 seconds channel change

I have to say.. The TVService is running on a Windows 2003 R2 SP2 PDC, all clients are connected to this server (using domain security)

The server is fast enough.. reaching 97% of 1Gb in taskmanager when copieing large files over the network.
Clients and server are all connected to an 1Gbps managed switch; and server has a raid5 setup containing 6xWDC Raptors

For me the problem is TSreader opening network .ts files----

Iosu

 

[stoked]

Haven't tried this yet, but does this allow for comskip to work via multi-seat clients?

 

[stoked]

Channel switching works pretty well until it crashes. Seems a little unstable in my setup.

Mediaportal TV Server/Client RC1 SVN 19453
Windows XP SP3

Scenario 1: Watching an HD channel.... 5-10min in I here a Windows ding, which means MP crashed, yet the channel is still streaming.
Scenario 2: Watching a recorded show, press Guide, then select a channel, TV Server doesn't start timeshifting and MP fails to stream.

And I don't think comskip is working but I have to check my settings. I'll keep testing and post any changes.

 

[stoked]

Was able to fix most of the instability. However, I seem to get stutters at somewhat regular intervals. Maybe it has to do with number of files used for timeshifting? I assume the MP client has to switch between the sequential timeshift files...

 

[iosub]

Was able to fix most of the instability. However, I seem to get stutters at somewhat regular intervals. Maybe it has to do with number of files used for timeshifting? I assume the MP client has to switch between the sequential timeshift files...

Yes that's what I think... TSreader opening files on remote server is taking time, so when is in timeshifting and the file is change.. some times there is a litle pause.. If I see a recorded show of the same channel... There is no pause during all show

Iosu