TVServer - dvb-s and dvb-t card conflict - Attempted to read or write protected mem. (1 Viewer)

Duke_ivo

Portal Member
June 24, 2008
44
2
Home Country
TV-Server Version: 1.0 rc3
MediaPortal Version: 1.0 rc4
MediaPortal Skin: blue3wide
Windows Version: xp sp3
1. TV Card: Pinnacle Stargate Capture (pci)
1. TV Card Type: DVB-S
2. TV Card: AF9015 BDA Filter
2. TV Card Type: DVB-T (usb)
MPEG2 Video Codec: MPV
MPEG2 Audio Codec: MPA
HTPC Case: Antec


Hello,

I'm using DVB-S for lonq time now - all fine. As we are introduced to Digital TV here i decided to test it and got DigiVox mini II v3.0 (AF9015 BDA Filter). And there all my problems start.... Initialy i was unable to get dvb-t card working and as it isn't in list of supported cards i thought it's a card or drivers problem.....
And also i got problems with already working dvb-s card. How it looks ? Problems starting TVserver service (not always good) and when i start Tvserver setup - i don't see any card and when try to preview channels - i get error that channel is not mapped to any card.

But then i made simple test:
- Disable dvb-s - i got dvb-t working prety well.
- Disable dvb-t - dvb-s is working as before.

- Enable both - and all my problems re-start. From log's i see that there is some problem while initializing dvb-t card and somehow tvserver service is looking at dvb-s card and that particular moment.

I'm attaching full TVserver logs from clean startup of both cards present. Any views/idea's where i might have a problem ?

Thanks.
 

Duke_ivo

Portal Member
June 24, 2008
44
2
Home Country
Hello,

I upgraded TvServer from 1.0 RC3 to 1.0 FINAL -> still the same error. That means final release has this bug as well.

Cheers,

- Ivo -
 

deebo

Portal Pro
April 19, 2006
233
3
what gfx card do you have?

i got these memory read errors due to a broken geforce 8500gt, after i swapped it for a ati hd4350 everything is fine again
 

Duke_ivo

Portal Member
June 24, 2008
44
2
Home Country
I have Geforce 8200, but don't think this is the problem as dvb-s and dbv-t alone works fine.... I can't get till preview as TvServer can't initialize second one if both are present.....
 

Duke_ivo

Portal Member
June 24, 2008
44
2
Home Country
Hello,

Yes i do latest BDA hotfix.
Yes i did clean MP and MP server installation.

Any other ideas ?


- Ivo -
 

Duke_ivo

Portal Member
June 24, 2008
44
2
Home Country
Hello in 2009,

Does no one really knows why TVServer tries to use dvb-s instead of dvb-t when 2 cards available ?
Have tried out everything. Have rechecked all updates and patches twice.

Error log messages still the same (look above).
----
2009-01-02 11:50:58.515625 [5]: dvb: using [Tuner]: AF9015 BDA Filter
2009-01-02 11:50:58.515625 [5]: dvb: Render [Network provider]->[Tuner] OK
2009-01-02 11:50:58.531250 [5]: dvb: Find BDA receiver
2009-01-02 11:50:58.531250 [5]: dvb: match Capture by Tuner device path
2009-01-02 11:50:58.531250 [5]: dvb: -Pinnacle Stargate Capture
2009-01-02 11:50:58.531250 [5]: dvb: -
2009-01-02 11:50:58.531250 [5]: dvb: Match by device path failed - trying alternative method
2009-01-02 11:50:58.531250 [5]: dvb: match Capture filter by Tuner device connection
2009-01-02 11:50:58.531250 [5]: dvb: -Pinnacle Stargate Capture


Thanks,


- Ivo -
 

Users who are viewing this thread

Top Bottom