Twinhan DVB-C, problem with detecting in MP (1 Viewer)

[chrisse]

Ok, I get the following error now:
http://mp.pastebin.com/718166

If I would take a wild guess (from a newbie) I would say that codecs, decoder, encoder are missing?

Does anyone have a clue?

Thanx!

Regards,
Chrisse

 

[antijape]

I exactly in the same situation as chrisse. I have the same card and had/have the same problems... When trying to edit the card it says "Unable to create graph for this device" and the autotune is missing. In the RC2 (now using RC4) I had the tuning options visible, but I couldn't get it work... At that time I had the possibility to manually edit the DVB-C settings, but there were so many "cryptic" values I failed. Is there anywhere a detailed explanation about what these values are/mean and how to find them out? The TwinhanDTV configuration shows some of these, but not all. Also TwinhanDTV works just fine, but as you know it sucks, so it would be extremely nice to get the MP side working...

edit: small correction, of course I'm still able to change the DVB-C settings... I was mixing things with MP and TwinhanDTV... sorry. To make myself more clear, what are these and how to find the correct values for them: Network ID, Service ID, Transport ID, PMT pid, PCR pid. I know the values for Frequency, SymbolRate, Modulation, AudioPID and VideoPID.

 

[chrisse]

Ok, so now we are 2 then.. (should I laugh or cry?)

Are you also antijape getting same errors in your logs:

#
15.5.2006 8:27:22 1 vmr9:ctor()
#
15.5.2006 8:27:22 1 vmr9:ctor() DX9Device=null
#
15.5.2006 8:27:22 1 vmr9:ctor() _renderFrame=null
#
15.5.2006 8:27:22 1 vmr9:ctor() done:False

#
15.5.2006 8:27:22 DVBGraphBDA: Unable to find sinkPin: <0>
#
15.5.2006 8:27:22 DVBGraphBDA:CreateGraph() FAILED interface filter not found

Something is telling me that encoders are "bad" (since this card doesn´t have harware builtin?)

Here is a other, different thread that I started for this problem:
https://forum.team-mediaportal.com/viewtopic.php?t=15415

antijape, could you paste your capturecarddefinitions.xml here (Twinhan DVB-C (Mantis 2033)" location is enough)?

Regards,
Chrisse

PS! Oletko muuten ostanut kortin meiltä? (DigiComp:ilta)

 

[mcmatrix]

Ok my last try

i have plugged in my Twinhan Mantis card and configured it again to work with MP. Channel scanning and all other stuff seems now ok.

<capturecard commercialname="Twinhan DVB-C (VP-2033)" capturename="DTV-DVB Mantis Virtual BDA Receiver" devid="ven_1822&amp;dev_4e35&amp;subsys_00081822&amp;rev_01">
<capabilities tv="true" radio="false" mpeg2="true" mce="false" sw="false" bda="true"/>
<tv>
<interface cat="tunerdevice" video="2" audio="3" mpeg2="1" sectionsandtables="5"/>
<filters>
<filter cat="networkprovider" name="Microsoft DVBC Network Provider" checkdevice="false"/>
<filter cat="tunerdevice" name="DTV-DVB Mantis DVBC BDA Receiver" checkdevice="true"/>
<filter cat="capture" name="DTV-DVB Mantis Virtual BDA Receiver" checkdevice="true"/>
</filters>
<connections>
<connection sourcefilter="networkprovider" sourcepin="0" sinkfilter="tunerdevice" sinkpin="0"/>
</connections>
</tv>
</capturecard>

 

[chrisse]

Thank You so much for your effort to help me!! Than you very much!

So far I´ve got no errors..

Regards,
Chrisse

 

[chrisse]

Oh well...

After an hour or two I had to do a clean MP install because of my TV card settings going mad (MP setup allways crashing when starded).

But now with mcmatrix .xml settings I can actually do autoscan for TV channels (didn´t actually think this day or like now night would come).

I´m just sooo happy

Thanx alot mcmatrix and all you other for your kindness in helping me out!

PS! in finland use symbolrate 6875 (DVB-C) for autotuning TV channels!

 

[antijape]

I'll get back to you guys later this week. I'm away from home at the moment, so I can't test the settings right now.

Chrisse: Ei ole digicompista hankittu vaan Kotkasta pienestä paikallisesta IT puljusta. Mukava huomata että täällä on muitakin suomalaisia!

 

[chrisse]

Aivan! Mulla toimii nyt autotune aika hienosti! MTV3, SubTV ja Nelonen puuttuu vielä mutta se ei ole kortin vika..

HUOM!! Kun päivität .XML tiedoston, poista ensiks kortti MP setup ohjelmasta. Muuten tämä menee looppiin ja kaatuilee -> MP new install!

 

[antijape]

It works! All the channels and everything else works perfectly! Thanks to both of you! This is one of the reasons why I like MP so much: you'll always find/get help. Thanks again.

 

[chrisse]

All credits to mcmatrix for his kindness to install MP and tweaking the files!