MediaPortal Version: 1.1 beta SVN:23908
MediaPortal Skin: PureVision HD 2.8
Windows Version: Windows 7 x64 RTM
CPU Type: Intel E2180
HDD: Samsung F1 1TB SATAII
Memory: 4GB OCZ PC8000 2x2GB sticks
Motherboard: Gigabyte GA-E7AUM-DS2H
Video Card: NVidia 9400 IGP
Video Card Driver: 191.0 WHQL
Sound Card: Realtek 889a onboard chip
Sound Card AC3: AC3 filter SPDIF optical out
Sound Card Driver: R 2.35
1. TV Card: Pinnacle 7010ix
1. TV Card Type:
1. TV Card Driver:
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: All filters controlled by SAF. Except...
MPEG2 Audio Codec: AC3 filter used for DTS and DD. SPDif used optical.
h.264 Video Codec:
Satelite/CableTV Provider:
HTPC Case: Generic mini tower ATX
Cooling: std Intel HSF. Small case fan
Power Supply: generic with case 450w
Remote: Wireless keyboard + Trust 2400 RC
TV: 50" Samsung Plasma 557a
TV - HTPC Connection: HDMI for TV and Optical SPdif for Sound
Hello
I had a fully working copy of MP 1.02 which was configured with a few plugins. So I removed it completely and rebooted the PC. I ensured that all folders were removed from that previous install.
I then installed 1.02, no TV server required, and did not run the config.
I then installed the 1.1beta SVN:23908 build and it would crash at the config screen and not allow me to continue.
I completely removed MP and went through the same routine and the same error prevented me from configuring or running MP.
I removed again and this time installed 1.02 and checked to see if I could open the config screen and all was well. I did not configure any settings but just exited it.
I installed that SVN build again and the same error applied thus preventing me from configuring MP. Trying to run MP would also crash the application.
No plugins or anything other than the 1.02 of MP and the SVN noted was installed.
Error logs attached.
MediaPortal Skin: PureVision HD 2.8
Windows Version: Windows 7 x64 RTM
CPU Type: Intel E2180
HDD: Samsung F1 1TB SATAII
Memory: 4GB OCZ PC8000 2x2GB sticks
Motherboard: Gigabyte GA-E7AUM-DS2H
Video Card: NVidia 9400 IGP
Video Card Driver: 191.0 WHQL
Sound Card: Realtek 889a onboard chip
Sound Card AC3: AC3 filter SPDIF optical out
Sound Card Driver: R 2.35
1. TV Card: Pinnacle 7010ix
1. TV Card Type:
1. TV Card Driver:
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: All filters controlled by SAF. Except...
MPEG2 Audio Codec: AC3 filter used for DTS and DD. SPDif used optical.
h.264 Video Codec:
Satelite/CableTV Provider:
HTPC Case: Generic mini tower ATX
Cooling: std Intel HSF. Small case fan
Power Supply: generic with case 450w
Remote: Wireless keyboard + Trust 2400 RC
TV: 50" Samsung Plasma 557a
TV - HTPC Connection: HDMI for TV and Optical SPdif for Sound
Hello
I had a fully working copy of MP 1.02 which was configured with a few plugins. So I removed it completely and rebooted the PC. I ensured that all folders were removed from that previous install.
I then installed 1.02, no TV server required, and did not run the config.
I then installed the 1.1beta SVN:23908 build and it would crash at the config screen and not allow me to continue.
I completely removed MP and went through the same routine and the same error prevented me from configuring or running MP.
I removed again and this time installed 1.02 and checked to see if I could open the config screen and all was well. I did not configure any settings but just exited it.
I installed that SVN build again and the same error applied thus preventing me from configuring MP. Trying to run MP would also crash the application.
No plugins or anything other than the 1.02 of MP and the SVN noted was installed.
Error logs attached.