Unable to start graph ( Testing channels in TVServer ) (1 Viewer)
- Thread starter SvenVdb
- Start date
- Thread starter
- #12
Nope they don't work in MediaPortal....
- September 1, 2008
- 21,544
- 8,236
- Home Country
-
New Zealand
Okay, please disable Argus and use the MediaPortal watchdog/debug-tool to test the channels in MediaPortal. Please make sure you try more than one channel.
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/16_Support/3_Forums/2_Log_Files
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/16_Support/3_Forums/2_Log_Files
- Thread starter
- #14
MM, did a quick look and there are a ton of these errors going way back.
tvserver_TVService.log
[2014-07-11 19:54:04,545] [Log ] [Analog TV scan thread] [ERROR] - analog: DoTvScan error (missing software encoder)
tvserver_SetupTV-Error.log
[2014-07-11 19:54:04,545] [Log ] [Analog TV scan thread] [ERROR] - analog: DoTvScan error (missing software encoder)
And a lot of
tvserver_TVService.log
[2014-07-13 20:22:39,454] [Log ] [Record ] [ERROR] - Exception :TvLibrary.TvException: Unable to start graph
at TvLibrary.Implementations.Analog.TvCardAnalog.RunGraph(Int32 subChannel)
at TvLibrary.Implementations.Analog.TvCardAnalog.Tune(Int32 subChannelId, IChannel channel)
at TvService.CardTuner.Tune(IUser& user, IChannel channel, Int32 idChannel)
Hope this helps you....
tvserver_TVService.log
[2014-07-11 19:54:04,545] [Log ] [Analog TV scan thread] [ERROR] - analog: DoTvScan error (missing software encoder)
tvserver_SetupTV-Error.log
[2014-07-11 19:54:04,545] [Log ] [Analog TV scan thread] [ERROR] - analog: DoTvScan error (missing software encoder)
And a lot of
tvserver_TVService.log
[2014-07-13 20:22:39,454] [Log ] [Record ] [ERROR] - Exception :TvLibrary.TvException: Unable to start graph
at TvLibrary.Implementations.Analog.TvCardAnalog.RunGraph(Int32 subChannel)
at TvLibrary.Implementations.Analog.TvCardAnalog.Tune(Int32 subChannelId, IChannel channel)
at TvService.CardTuner.Tune(IUser& user, IChannel channel, Int32 idChannel)
Hope this helps you....
- September 1, 2008
- 21,544
- 8,236
- Home Country
-
New Zealand
@SvenVdb
Hmmm, I come back to the "restart PC" suggestion...
From the log files, the last time the tuner was used successfully was during a stress test:
[2014-07-12 21:45:05,508] [Log ] [13 ] [INFO ] - analog: RunGraph succeeded
After that you put the PC into standby:
[2014-07-12 23:59:27,568] [Log ] [PowerEventThread] [DEBUG] - OnPowerEvent: PowerStatus: Suspend
...and the problems start after resume, the next time you try to use the tuner.
[2014-07-13 13:00:48,679] [Log ] [40 ] [INFO ] - analog: RunGraph returns:0x8007001F
Are you 100% sure that rebooting and then avoiding use of standby/resume does not help, because it really looks like the tuner can't handle standby/resume.
Hmmm, I come back to the "restart PC" suggestion...
From the log files, the last time the tuner was used successfully was during a stress test:
[2014-07-12 21:45:05,508] [Log ] [13 ] [INFO ] - analog: RunGraph succeeded
After that you put the PC into standby:
[2014-07-12 23:59:27,568] [Log ] [PowerEventThread] [DEBUG] - OnPowerEvent: PowerStatus: Suspend
...and the problems start after resume, the next time you try to use the tuner.
[2014-07-13 13:00:48,679] [Log ] [40 ] [INFO ] - analog: RunGraph returns:0x8007001F
Are you 100% sure that rebooting and then avoiding use of standby/resume does not help, because it really looks like the tuner can't handle standby/resume.
- Thread starter
- #18
I had indeed a problem with the tuner a couple days ago. (Video encoder stuff)
But that was solved.
I put my PC never in stanby. Always shutdown...
Since that day, my pc did multiple reboots, (every night a shutdown)....
So it must be something else....
But that was solved.
I put my PC never in stanby. Always shutdown...
Since that day, my pc did multiple reboots, (every night a shutdown)....
So it must be something else....
- September 1, 2008
- 21,544
- 8,236
- Home Country
-
New Zealand
So why are the log files telling me something different?
[2014-07-13 23:44:11,323] [Log ] [PowerEventThread] [DEBUG] - TV service PowerEventThread received WM_POWERBROADCAST 4
[2014-07-13 23:44:11,339] [Log ] [PowerEventThread] [DEBUG] - OnPowerEvent: PowerStatus: Suspend
[2014-07-13 23:44:11,339] [Log ] [PowerEventThread] [DEBUG] - OnPowerEventHandler: PowerStatus: Suspend
[2014-07-13 23:44:11,339] [Log ] [PowerEventThread] [INFO ] - TvController.OnSuspend()
[2014-07-13 23:44:11,354] [Log ] [PowerEventThread] [INFO ] - Scheduler: stopped
[2014-07-13 23:44:11,354] [Log ] [PowerEventThread] [DEBUG] - Scheduler: thread stopped.
[2014-07-13 23:44:11,354] [Log ] [PowerEventThread] [INFO ] - Stopcard
[2014-07-13 23:44:11,354] [Log ] [PowerEventThread] [INFO ] - tvcard:FreeAllSubChannels
[2014-07-13 23:44:11,354] [Log ] [PowerEventThread] [INFO ] - analog: StopGraph state
topped[2014-07-13 23:44:11,354] [Log ] [PowerEventThread] [DEBUG] - ArgusTV.Recorder.MediaPortalTvServer: System is entering standby
[2014-07-14 17:52:50,459] [Log ] [4 ] [DEBUG] - Setting up EventWaitHandle with name: Global\MPTVServiceInitializedEvent
[2014-07-14 17:52:51,022] [Log ] [4 ] [INFO ] - Set loglevel to: Debug
[2014-07-14 17:52:51,037] [Log ] [8 ] [INFO ] - TV Service: Starting
This clearly shows that your system was suspended overnight, not fully shutdown.
As above: on the night of 13 July the system was suspended, not shutdown.
I see the same thing every night since 30 June.
[2014-06-30 23:37:38,391] [Log ] [PowerEventThread] [DEBUG] - OnPowerEventHandler: PowerStatus: Suspend
...
[2014-07-01 18:26:28,321] [Log ] [8 ] [INFO ] - TV Service: Starting
etc. etc. etc.
How are you shutting down the PC?
- Thread starter
- #20
So why are the log files telling me something different?
[2014-07-13 23:44:11,323] [Log ] [PowerEventThread] [DEBUG] - TV service PowerEventThread received WM_POWERBROADCAST 4
[2014-07-13 23:44:11,339] [Log ] [PowerEventThread] [DEBUG] - OnPowerEvent: PowerStatus: Suspend
[2014-07-13 23:44:11,339] [Log ] [PowerEventThread] [DEBUG] - OnPowerEventHandler: PowerStatus: Suspend
[2014-07-13 23:44:11,339] [Log ] [PowerEventThread] [INFO ] - TvController.OnSuspend()
[2014-07-13 23:44:11,354] [Log ] [PowerEventThread] [INFO ] - Scheduler: stopped
[2014-07-13 23:44:11,354] [Log ] [PowerEventThread] [DEBUG] - Scheduler: thread stopped.
[2014-07-13 23:44:11,354] [Log ] [PowerEventThread] [INFO ] - Stopcard
[2014-07-13 23:44:11,354] [Log ] [PowerEventThread] [INFO ] - tvcard:FreeAllSubChannels
[2014-07-13 23:44:11,354] [Log ] [PowerEventThread] [INFO ] - analog: StopGraph state
[2014-07-13 23:44:11,354] [Log ] [PowerEventThread] [DEBUG] - ArgusTV.Recorder.MediaPortalTvServer: System is entering standby
[2014-07-14 17:52:50,459] [Log ] [4 ] [DEBUG] - Setting up EventWaitHandle with name: Global\MPTVServiceInitializedEvent
[2014-07-14 17:52:51,022] [Log ] [4 ] [INFO ] - Set loglevel to: Debug
[2014-07-14 17:52:51,037] [Log ] [8 ] [INFO ] - TV Service: Starting
This clearly shows that your system was suspended overnight, not fully shutdown.
As above: on the night of 13 July the system was suspended, not shutdown.
I see the same thing every night since 30 June.
[2014-06-30 23:37:38,391] [Log ] [PowerEventThread] [DEBUG] - OnPowerEventHandler: PowerStatus: Suspend
...
[2014-07-01 18:26:28,321] [Log ] [8 ] [INFO ] - TV Service: Starting
etc. etc. etc.
How are you shutting down the PC?
In windows 8.1 you have the new "button" on the left corner. I click on that one and then "Shutdown" ...