- March 14, 2011
- 16
- 0
- Home Country
-
Hi all
Im a new but so far very happy MP newbie; just slowly working through the few issues that I have......
I have a strange problem when watching my recorded TV...
The program records ok, with pre & post recording buffers all correct.
If I watch the recorded program, and dont FF at all, everything is fine, however, if I FF at any stage the counter skips ahead of the picture (and sound) and over the course of say a 1 hr show, what happens is that the counter reaches the "end" of the recording and kicks me back out to the "recorded TV" screen; and I miss the end of my show.
Since i started some detective work, I've found that if at any point I stop playback, then restart it again, selecting the "restart from xxx" option, MP corrects itself; ie: playback will start from much earlier in the recording than where I stopped it (time counter will remain the same)
I've also found that this is only a problem when i use the FF x2 & x4 functions; x8 and above works correctly........
I hope my explanation makes sense.......I've searched the forums and havent found reference to a fault quite like this. Although I did notice some other problems associated with the FF x2 & x4......
Any help would be greatly appreciated!
Thanks
Barry
MediaPortal Version: 1.1.2.0
MediaPortal Skin: Streamed MP
Windows Version: Windows 7 Pro
CPU Type: Intel i3 540
HDD: Samsung F4 2TB
Memory: GSkill DDR3 4 GB
Motherboard: ASUS P7-H55-M
Video Card: onboard
Video Card Driver:
Sound Card: onboard
Sound Card AC3:
Sound Card Driver:
1. TV Card: Leadtek DTV2000DS
1. TV Card Type: DVB-T
1. TV Card Driver:
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
h.264 Video Codec:
Satelite/CableTV Provider:
HTPC Case:
Cooling:
Power Supply: Antec Earthwatts 430
Remote:
TV: Sansung 50" Series 8 Plasma
TV - HTPC Connection: HDMI (via Denon AVR-1910)
Im a new but so far very happy MP newbie; just slowly working through the few issues that I have......
I have a strange problem when watching my recorded TV...
The program records ok, with pre & post recording buffers all correct.
If I watch the recorded program, and dont FF at all, everything is fine, however, if I FF at any stage the counter skips ahead of the picture (and sound) and over the course of say a 1 hr show, what happens is that the counter reaches the "end" of the recording and kicks me back out to the "recorded TV" screen; and I miss the end of my show.
Since i started some detective work, I've found that if at any point I stop playback, then restart it again, selecting the "restart from xxx" option, MP corrects itself; ie: playback will start from much earlier in the recording than where I stopped it (time counter will remain the same)
I've also found that this is only a problem when i use the FF x2 & x4 functions; x8 and above works correctly........
I hope my explanation makes sense.......I've searched the forums and havent found reference to a fault quite like this. Although I did notice some other problems associated with the FF x2 & x4......
Any help would be greatly appreciated!
Thanks
Barry
MediaPortal Version: 1.1.2.0
MediaPortal Skin: Streamed MP
Windows Version: Windows 7 Pro
CPU Type: Intel i3 540
HDD: Samsung F4 2TB
Memory: GSkill DDR3 4 GB
Motherboard: ASUS P7-H55-M
Video Card: onboard
Video Card Driver:
Sound Card: onboard
Sound Card AC3:
Sound Card Driver:
1. TV Card: Leadtek DTV2000DS
1. TV Card Type: DVB-T
1. TV Card Driver:
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
h.264 Video Codec:
Satelite/CableTV Provider:
HTPC Case:
Cooling:
Power Supply: Antec Earthwatts 430
Remote:
TV: Sansung 50" Series 8 Plasma
TV - HTPC Connection: HDMI (via Denon AVR-1910)
