Netherlands
TV-Server Version: 1.0 RC3
MediaPortal Version: 1.0 RC3
MediaPortal Skin: MP Gold 1366x768 1.0 RC3
Windows Version: XP professional SP3
CPU Type: Intel P4 530 3.0 GHz HT (S775)
HDD: WD 500 GB SATA 7200 RPM + 3x WD USB2.0 500 GB (on remote server)
Memory: 1 GB (2 x 512 MB) Hynix DDR400 Dual Channel
Motherboard: ASUS PTGD-LR
Video Card: ATI Radeon X300SE 128 MB
Video Card Driver:
Sound Card: Realtek Intel High Definition Audio (7.1) 24 bits / 96 kHz
Sound Card AC3: S/Pdif coaxial to Logitech Z5500
Sound Card Driver:
1. TV Card: BlackGold GDI
1. TV Card Type: DVB-T
1. TV Card Driver:
2. TV Card: BlackGold GDI
2. TV Card Type: DVB-T
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: MPV
MPEG2 Audio Codec: MPA
h.264 Video Codec:
Satelite/CableTV Provider: none
HTPC Case: HP Z522
Cooling: Cooler Master KDH-5067K
Power Supply:
Remote: HP MCE remote
TV: Samsung LE32R41B
TV - HTPC Connection: Sub-D
PROBLEM:
The tvguide.xml file is not automatically imported if the file is located on a shared network drive (e.g. \\gx270\xmltv).
A forced import of the same file (import button in TVserver config) works fine. Which suggest all settings are OK. An automatic import of the same file works fine (if relocated to a local drive and the path in TVserver config is adjusted accordingly).
Can someone confirm this behaviour?
This is important to me, because this network drive is on the only PC in the network that runs 24/24 and that is destined to become the TV server. My HTPC is not running 24/24 and is not password protected and can therefore not run a schedule to create the tvguide.xml file. I have not found a good work arround apart from the forced import (cumbersum).
VdR
MediaPortal Version: 1.0 RC3
MediaPortal Skin: MP Gold 1366x768 1.0 RC3
Windows Version: XP professional SP3
CPU Type: Intel P4 530 3.0 GHz HT (S775)
HDD: WD 500 GB SATA 7200 RPM + 3x WD USB2.0 500 GB (on remote server)
Memory: 1 GB (2 x 512 MB) Hynix DDR400 Dual Channel
Motherboard: ASUS PTGD-LR
Video Card: ATI Radeon X300SE 128 MB
Video Card Driver:
Sound Card: Realtek Intel High Definition Audio (7.1) 24 bits / 96 kHz
Sound Card AC3: S/Pdif coaxial to Logitech Z5500
Sound Card Driver:
1. TV Card: BlackGold GDI
1. TV Card Type: DVB-T
1. TV Card Driver:
2. TV Card: BlackGold GDI
2. TV Card Type: DVB-T
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: MPV
MPEG2 Audio Codec: MPA
h.264 Video Codec:
Satelite/CableTV Provider: none
HTPC Case: HP Z522
Cooling: Cooler Master KDH-5067K
Power Supply:
Remote: HP MCE remote
TV: Samsung LE32R41B
TV - HTPC Connection: Sub-D
PROBLEM:
The tvguide.xml file is not automatically imported if the file is located on a shared network drive (e.g. \\gx270\xmltv).
A forced import of the same file (import button in TVserver config) works fine. Which suggest all settings are OK. An automatic import of the same file works fine (if relocated to a local drive and the path in TVserver config is adjusted accordingly).
Can someone confirm this behaviour?
This is important to me, because this network drive is on the only PC in the network that runs 24/24 and that is destined to become the TV server. My HTPC is not running 24/24 and is not password protected and can therefore not run a schedule to create the tvguide.xml file. I have not found a good work arround apart from the forced import (cumbersum).
VdR