[TV] 0x800705AA error on tune (1 Viewer)

infinite.loop

Retired Team Member
  • Premium Supporter
  • December 26, 2004
    16,163
    4,133
    127.0.0.1
    Home Country
    Austria Austria
    Answer to 3: Worked after reboot for some time (no power down)
    If it worked "for some time", then i jave to agree with tourette that this sounds like a hardware problem.
    Best test would be to revert to the MP version you used before.

    Will take some time to attach the full logs because the log collector crashes:
    I do not understand a single word of that localized .net error. :D
    just add all logs into a zip file. ;)
     

    Brudertac

    MP Donator
  • Premium Supporter
  • October 26, 2006
    978
    277
    Augsburg
    Home Country
    Germany Germany
    1. again a bugreport which does not follow the :guideline: *my mousecursor is above the "delete this thread" button*
      So either update the first post or i will remove it.
      -> FULL LOGS ! <-
    2. do you use the updated Beta 1 release? (again i can not know, because you choosen to not follow the guideline)
    3. tried shutting down the HTPC? -> disconnect main power -> wait 5 minutes -> reboot (to reset the floppydtv)

    1. Please see the Logs Attached
    2. Yes
    3. Tried it, but it doesn´t help. In my case a Reboot does not help too.

    Thanks and best regards.
     

    infinite.loop

    Retired Team Member
  • Premium Supporter
  • December 26, 2004
    16,163
    4,133
    127.0.0.1
    Home Country
    Austria Austria
    could you guy's please reinstall the MP version you had running before 1.1.0 BETA 1 to verify that your systems are still okay?
    so far noone from the team with the same TV-Cards is able to reproduce the reported problem.
     

    Brudertac

    MP Donator
  • Premium Supporter
  • October 26, 2006
    978
    277
    Augsburg
    Home Country
    Germany Germany
    could you guy's please reinstall the MP version you had running before 1.1.0 BETA 1 to verify that your systems are still okay?
    so far noone from the team with the same TV-Cards is able to reproduce the reported problem.

    OMG. Sorry, it was my fault.... Forgot to enable CAM in the Card-Options.
    Man, have done this so often and now.... sorry sorry sorry. :sorry:

    Beer for all! :oops:
     

    riksmith

    Portal Pro
    April 18, 2009
    1,856
    322
    Home Country
    Netherlands Netherlands
    Well i do have cam enabled. I will have to test first how the Vista 32 bit alpha version works. If that works OK i wil try to upgrade to this beta and see how that works.

    The only problem is: I don't know how to reproduce since it occurs spontanious. :)

    SO: This will take some time to figure out. Hang on ;)
     

    riksmith

    Portal Pro
    April 18, 2009
    1,856
    322
    Home Country
    Netherlands Netherlands
    I can't reproduce this anymore so i guess this is not a Mediaportal problem.

    Case closed.
     

    riksmith

    Portal Pro
    April 18, 2009
    1,856
    322
    Home Country
    Netherlands Netherlands
    I have the problem again and now i have the logs attached.

    Something special i now noticed:

    Code:
    2009-09-13 09:33:27.690069 [Scheduler timer]: Controller:    card:1 type:DvbIP cannot tune to channel
    2009-09-13 09:33:27.698069 [Scheduler timer]: Controller:  [B]  card:6[/B] type:DvbC is tuned to same transponder[B] decrypting 8/8 channels. cam limit reached[/B]
    2009-09-13 09:33:27.699069 [Scheduler timer]: Controller:    card:6 type:DvbC is available priority:4 #users:0 same transponder:False
    2009-09-13 09:33:27.702069 [Scheduler timer]: Controller:    card:4 type:RadioWebStream cannot tune to channel
    2009-09-13 09:33:27.709070 [Scheduler timer]: Controller:    card:5 type:DvbC is tuned to same transponder decrypting 1/8 channels
    2009-09-13 09:33:27.710070 [Scheduler timer]: Controller:    card:5 type:DvbC is available priority:3 #users:1 same transponder:True
    2009-09-13 09:33:27.710070 [Scheduler timer]: Controller: found 2 available
    2009-09-13 09:33:27.711070 [Scheduler timer]: Scheduler : record on free card:6 priority:4
    2009-09-13 09:33:27.712070 [Scheduler timer]: Scheduler : record, first tune to channel
    2009-09-13 09:33:27.714070 [21]: [B]card: Tune 6[/B] to RTL 5

    I think somethings hangs, because i am not watching that much channels at the same time.
     

    tourettes

    Retired Team Member
  • Premium Supporter
  • January 7, 2005
    17,301
    4,800
    Any body?

    How that did happen? Did you cchange the channel approx 8 times and then it failed? Please post full logs that show the full use case (and do not do anything else in that mediaPortal session). Maybe it will show what is happening.
     

    Users who are viewing this thread

    Top Bottom