AtmoLight - 1.18.6.0 [2016-09-21] (3 Viewers)

[Lightning303]

Left my system on over night finding tons of these in the Logs

[2015-01-09 11:06:21,456] [Error ] [54 ] [ERROR] - AtmoLight: HueHandler - Error during average color calculations
[2015-01-09 11:06:21,462] [Error ] [54 ] [ERROR] - AtmoLight: HueHandler - Eine Ausnahme vom Typ "System.OutOfMemoryException" wurde ausgelöst.

Unfortuntaly the logs indicating where it has started werer overwritten ...

Thats not good . What effect was active?

 

[pur_berger]

LiveTV with Hue and atmoin (MP Live View)

 

[Lightning303]

@pur_berger, we had a look and think we got the bad guy. We are gonna rewrite some of the code to fix this. However this wont make it into next release, which i will prepare now . But we will call you with a test version when we are ready .

 

[Lightning303]

New AtmoLight version

Some of the changes are:

AmbiBox support
With AtmoLight 1.15.0.0 we now support AmbiBox as a target. Some of you may know we had been working on AmbiBox for some time now, but due to a bug in AmbiBox we were not able to support it. AmbiBox has been updated to 2.1.7 and the bug has been fixed. So if you are using Lightpack, or just like AmbiBox better than other solutions, you can now use AtmoLight with it.
For MediaPortal liveview, GIFReader or VUMeter please select "MediaPortal capture" or "XBMC / Kodi capture" in Ambibox.
If you want to be able to switch between MediaPortal liveview and external liveview (playclaw, Win8 mode and so on), please create two profiles in AmbiBox, one with MediaPortal capture and one with you other capture mode and add these two profiles in the AtmoLight config. AtmoLight can then switch between these profiles.
http://www.ambibox.ru/en/index.php/Main_Page

VUMeter improvements
VUMeter got some improvements. Mainly the resolution has been highered. Instead of 10 color rects, it now draws 48 by default (depends on your capture size). Also you can now define the color space for VUMeter Rainbow yourself in the config.

Hue average color improvements
The average color calculation for Hue has been improved. We also added some more options to tweek this yourself.

Hue settings from context menu
You can now change specific settings for your Hue lamps from the AtmoLight context menu.

AtmoOrb support
@Rick164 and I have been working on our own lamp project that is similar to Hue. We have added support for these lamps to AtmoLight aswell. If you want to know more, head on over to my showcase thread. https://forum.team-mediaportal.com/...p8266-wifi-module-and-ws2812b-rgb-leds.129229

Bugfixes
Some bugs have been fixed with the help of our community. All the effects are now being set correctly when MediaPortal starts, connecting to AtmoWin has been improved, to name a few. Have a look at the changelog for more information.

 

[kilik360]

Just to let you know that I tested your Hyperion settings and it's working wonderfully well !

I'm using all settings at OFF (Videos,Menu,Images) except for audio I use VUMeter. I Use it at OFF because i'm using Hyperion with HDMI Capture.

For your information I read on a thread, I don't remember where, that you cannot do 24p with HDMI capture.
I just want to confirm that its NOT true because I do 24p : ). You just need a good HDMI splitter, that's the secret.

Thanks Rick164 and Lightning303 for your hard work it's REALLY appreciated!

 

[Rick164]

Tested 24P with both the LightBerry and DIY hardware but the AVR never got an 24hz signal (only 50/60 hz), if you could double check in the Nvidia / AMD / Intel config tools and see if you have an 23hz/24hz option when all the Hyperion hardware is connected/turned on that would be great.

Your TV or AVR will automatically accept any signal so it will work just not at 24hz at least not with all the hardware I've tried so far , its really an hardware limitation because the composite converter can't get an 24hz input signal thus the device outputting will limit it to the capabilities of it which is 50/60hz.

 

[kilik360]

can you post a picture of you HDMI splitter ?!?

its really an hardware limitation because the composite converter can't get an 24hz input signal thus the device outputting will limit it to the capabilities of it which is 50/60hz.

I understand what you mean but, it really works for me, maybe the difference is that the HDMItoCVBS is set to NTSC and then it passes 24hz signal properly compare to you at PAL ?

 

[Rick164]

Don't use an splitter at the moment, the AVR supports 2 HDMI outs but used these ones for testing as well with the same results:

http://lightberry.eu/shop/shop/hdmi-premium-kit/
https://www.conrad.nl/nl/2-poorten-...160-pix-speaka-professional-zwart-419154.html

Can output 2x 24hz with the AVR so long as both output devices support it, once I connect the composite converter however it gets limited to 50/60hz because you can't split signals at different refresh rates.

Both NTSC and PAL don't support 24hz, 24P is really an universal standard which is not supported by analog signals (composite).
Even when splitting the HTPC/BD/STB needs to take all output devices into account, it will choose an refresh rate and resolution that is supported on all outputs as otherwise it wouldn't work.
On a few german boards they discuss the same issue with the live capture and so far no workaround has been found.

 

[kilik360]

ok... to be clear, what can make you happy and trust my word ?

 

[Rick164]

Think you got me wrong, it's not that I don't trust you but what I want to rule out is that it's not an false positive as lots of research is already done on this limitation either by people on other boards or by me when I started using Hyperion and all came to the same conclusion so far.

I'm just a bit skeptical on this subject because I've seen some reports on this before but nobody could ever confirm it, for instance the Lightberry folks promised an video displaying 24P capabilities but couldn't come up with a good one.
Currently no official confirmation from any of the commercial solutions based on Hyperion as well which should be a mayor selling point.

What I would to find out what is working and how as my first question was about that , because if you found a working solution I'm very sure others would to know as well