AtmoWin - improvement discussion (3 Viewers)

[BassFan]

what?
1.0.0.5 or 1.0.0.6

Should be 1.0.0.6 according to master.
View attachment 149445

yes.. I know
should then be changed from @azzuro to

greets

 

[HomeY]

yes.. I know
should then be changed from azzuro to

Yeps, just noticed it's only the FileVersion that needs an update so i can confirm!

 

[azzuro]

 

[Teeo]

Hello!

How about if AtmoWin had support to disable led's on windows standby?

You can set the shutdown color inside atmowin to 0 0 0 so the leds should stay off. Or what do you mean exactly?

When windows shuts down, atomwin will shutdown so setting color to 0 0 0 is ok. But if windows hibernate or goes to sleep atmowin will still be running and hence leds are still on

 

[Schicksal]

Is it possible to build in an offset for the LEDs?
Example:
My Arduino starts at the bottom left to count but Atmowin start at the top left.
Because of this situation i have to map all my LEDs (nearly 170) manually. That's no fun

An offset would help. Something like ... where is LED0 -> top left, top right, bottom right, bottom left.

 

[pur_berger]

One very very littel input from my side ... Zuordung hinuzufügen would be the correct Phrase

 

[HomeY]

When windows shuts down, atomwin will shutdown so setting color to 0 0 0 is ok. But if windows hibernate or goes to sleep atmowin will still be running and hence leds are still on

Yes, this might be a useful option, especially when you enable the LEDs in the Menus also. Then i shutdown my stuff when i go the bed, the HTPC stays on (S3 handled by PowerScheduler after 15 mins), so that still wouldn't be ideal, but a manual toggle with turn them off then.

An offset would help. Something like ... where is LED0 -> top left, top right, bottom right, bottom left.

That would indeed be a nice option, but you'll run into issues when you don't have the same amount of LEDs on L/R or Top/Bottom. You only need to configure them once and keep a backup of the Settings.xml But i agree, assigning a specific LED as 'first position' saves 170 clicks

 

[Schicksal]

Correct, on bottom i have only 34 LEDs instead of the top with 60 LEDs but the first position option would still save a lot of clicks

Pur_bergers Info would already do so. Is it already in atmowin integrated?

 

[azzuro]

Hum, maybe an small soft tools, for create in auto mode the mapping ? and only need to copy/past it to Atmowin xml setting.

 

[HomeY]

Correct, on bottom i have only 34 LEDs instead of the top with 60 LEDs but the first position option would still save a lot of clicks

True, but now we have the settings in an XML file, it's a LOT easier to configure it. You can simply edit the XML directly instead of all the clicking inside AtmoWin.

Hum, maybe an small soft tools, for create in auto mode the mapping ? and only need to copy/past it to Atmowin xml setting.

That's an idea, but to be honest: I did this once and after that i was done because i can copy the channel assignments to any profile. And a button will only work for users with exactly the same amount of LEDs on top/bottom.